successfully added to cart
View Cart

高精度孔精加工

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Applications
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (226)
  • Blind Hole Finishing Blind Hole Finishing (325)
  • Grooving Grooving (1)
  • ID Thread Turning ID Thread Turning (1)
  • Multiple Direction Cutting Multiple Direction Cutting (12)
  • Slot Milling Slot Milling (5)
  • Slot Side Slot Side (5)
  • Slot Square End Slot Square End (5)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (155)
  • Through Hole Finishing Through Hole Finishing (249)
Workpiece Material
  • P Steel (375)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (375)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (375)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (375)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (375)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (375)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (375)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (375)
  • M Stainless Steel (374)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (374)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (374)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (374)
  • K Cast Iron (350)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (350)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (350)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (350)
  • N Non-Ferrous Materials (203)
    • N1
      Wrought Aluminum
      (203)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (203)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (203)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (179)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (134)
    • N6
      Carbon, Graphite Composites, CFRP
      (134)
    • N7
      MMC's
      (134)
  • S High-Temp Alloys (373)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (373)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (373)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (373)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (373)
  • H Hardened Materials (132)
    • H1
      Hardened Materials 44-48 HRC
      (132)
    • H2
      Hardened Materials 48-55 HRC
      (132)
    • H3
      Hardened Materials 56-60 HRC
      (132)
    • H4
      Hardened Materials >60 HRC
      (132)
Cutting Diameter
  • 5.0 (4)
  • 5.5 (4)
  • 6.0 (6)
  • 6.35 (2)
  • 6.5 (4)
  • 7.0 (4)
  • 7.9375 (2)
  • 8.0 (6)
  • 9.0 (4)
  • 9.525 (2)
  • 10.0 (6)
  • 11.0 (4)
  • 11.1125 (2)
  • 12.0 (6)
  • 12.7 (2)
  • 13.0 (4)
  • 14.0 (14)
  • 14.288 (4)
  • 15.0 (8)
  • 15.875 (2)
  • 15.88 (1)
  • 16.0 (10)
  • 17.0 (8)
  • 17.463 (4)
  • 18.0 (10)
  • 18.87 (4)
  • 19.0 (9)
  • 19.05 (6)
  • 20.0 (10)
  • 20.998 (1)
  • 21.0 (5)
  • 21.998 (1)
  • 22.0 (6)
  • 22.225 (4)
  • 22.24 (1)
  • 23.0 (6)
  • 23.813 (4)
  • 24.0 (6)
  • 25.0 (7)
  • 25.4 (5)
  • 26.0 (6)
  • 27.0 (6)
  • 28.0 (7)
  • 28.575 (1)
  • 29.0 (2)
  • 30.0 (7)
  • 31.0 (2)
  • 31.75 (5)
  • 32.0 (7)
  • 33.0 (2)
  • 34.0 (6)
  • 35.0 (2)
  • 36.0 (7)
  • 36.52 (1)
  • 37.0 (2)
  • 38.0 (6)
  • 39.0 (2)
  • 39.6875 (1)
  • 39.991 (1)
  • 40.0 (6)
  • 41.0 (2)
  • 41.961 (1)
  • 42.0 (7)
to
Cutting Diameter
  • 0.1969 (4)
  • 0.2165 (4)
  • 0.2362 (6)
  • 0.25 (2)
  • 0.2559 (4)
  • 0.2756 (4)
  • 0.3125 (2)
  • 0.315 (6)
  • 0.3543 (4)
  • 0.375 (2)
  • 0.3937 (6)
  • 0.4331 (4)
  • 0.4375 (2)
  • 0.4724 (6)
  • 0.5 (2)
  • 0.5118 (4)
  • 0.551 (4)
  • 0.5512 (10)
  • 0.5625 (4)
  • 0.5906 (4)
  • 0.591 (4)
  • 0.625 (3)
  • 0.6299 (10)
  • 0.6693 (8)
  • 0.6875 (4)
  • 0.7087 (6)
  • 0.709 (4)
  • 0.743 (4)
  • 0.748 (9)
  • 0.75 (6)
  • 0.7874 (10)
  • 0.8268 (5)
  • 0.827 (1)
  • 0.866 (1)
  • 0.8661 (6)
  • 0.875 (5)
  • 0.9055 (6)
  • 0.9375 (4)
  • 0.9449 (6)
  • 0.9843 (7)
  • 1.0 (5)
  • 1.0236 (6)
  • 1.063 (6)
  • 1.1024 (7)
  • 1.125 (1)
  • 1.1417 (2)
  • 1.1811 (7)
  • 1.2205 (2)
  • 1.25 (5)
  • 1.2598 (7)
  • 1.2992 (2)
  • 1.3385 (4)
  • 1.3386 (2)
  • 1.378 (2)
  • 1.4173 (7)
  • 1.4375 (1)
  • 1.4567 (2)
  • 1.4961 (6)
  • 1.5354 (2)
  • 1.5625 (1)
  • 1.574 (1)
  • 1.5748 (6)
  • 1.6142 (2)
  • 1.625 (1)
  • 1.6535 (7)
to
Cutting Condition
  • Heavily Interrupted Cut (90)
  • Lightly Interrupted Cut (93)
  • Smooth Cut (93)
  • Varying Depth of Cut (93)
Cutting Condition Material
  • H-All (46)
  • K-All (92)
  • M-All (93)
  • N-All (90)
  • P-All (93)
  • S-All (93)
  • S4 (44)
Reach
  • 24.58 (1)
  • 25.63 (1)
  • 26.55 (1)
  • 49.99 (1)
  • 51.95 (1)
to
Reach
  • 0.968 (1)
  • 1.009 (1)
  • 1.045 (1)
  • 1.968 (1)
  • 2.045 (1)
to
Tool Cutting Edge Angle
  • 90.0 (66)
  • 91.0 (8)
  • 92.0 (23)
  • 93.0 (1)
  • 95.0 (4)
to
Connection Style
  • E-BORE Boring Bar (21)
  • Short Taper Reamer Shank (192)
  • Straight-Cylindrical (92)
  • Whistle Notch 2 (3)
  • Whistle Notch 2 Front (12)
Number of Flutes
  • 2 (4)
  • 4 (50)
  • 6 (148)
  • 8 (80)
Cutting Edges Per Insert
  • 1.0 (35)
  • 2.0 (31)
  • 3.0 (1)
  • 4.0 (92)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.038 (38)
  • 0.05 (2)
  • 0.051 (2)
  • 0.1 (133)
  • 0.102 (10)
  • 0.178 (2)
  • 0.18 (2)
  • 0.2 (133)
  • 0.203 (125)
  • 0.38 (2)
  • 0.381 (2)
  • 0.396 (10)
  • 0.397 (125)
  • 0.4 (135)
  • 0.5 (2)
  • 0.794 (21)
  • 0.8 (132)
  • 1.2 (10)
  • 1.6 (3)
to
Corner Radius
  • 0.0015 (38)
  • 0.002 (2)
  • 0.0039 (1)
  • 0.004 (132)
  • 0.007 (2)
  • 0.0079 (1)
  • 0.008 (132)
  • 0.015 (2)
  • 0.0156 (133)
  • 0.0158 (36)
  • 0.016 (9)
  • 0.0197 (2)
  • 0.0312 (21)
  • 0.0313 (132)
  • 0.0315 (39)
  • 0.0469 (10)
  • 0.047 (7)
  • 0.0625 (3)
  • 0.312 (10)
to
Corner Chamfer
  • 0.0 (141)
to
Corner Chamfer
  • 0.0 (141)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
  • Lightly Interrupted Cut (1)
  • Smooth Cut (1)
  • Varying Depth of Cut (1)
Grade Of Cutting Tool
  • HCK10 (39)
  • HK1500 (32)
  • HK35 (36)
  • HT2 (45)
  • HTX (44)
  • HWK15 (39)
  • K00379 (2)
  • K10M (42)
  • K10P (42)
  • K10U (38)
  • K15U (38)
  • K20K (42)
  • K25M (35)
  • K313 (134)
  • K420 (2)
  • K605 (24)
  • K68 (132)
  • KB1345 (20)
  • KB1610 (127)
  • KB1630 (54)
  • KB5610 (125)
  • KB5625 (48)
  • KB5630 (47)
  • KB9610 (48)
  • KBH10 (38)
  • KBH20 (55)
  • KBHK10 (5)
  • KBHK15 (5)
  • KC250 (87)
  • KC5010 (134)
  • KC5025 (134)
  • KC5410 (132)
  • KC6005 (76)
  • KC6105 (17)
  • KC6305 (97)
  • KC710 (88)
  • KC720 (132)
  • KC730 (134)
  • KC7310 (86)
  • KC732 (132)
  • KC8050 (132)
  • KC810 (132)
  • KC850 (132)
  • KC9010 (125)
  • KC9025 (132)
  • KC910 (132)
  • KC9105 (132)
  • KC9110 (132)
  • KC9120 (125)
  • KC9125 (132)
  • KC9225 (132)
  • KC9240 (132)
  • KC9240NEW (132)
  • KC9315 (132)
  • KC9320 (132)
  • KC9325 (132)
  • KC935 (134)
  • KC950 (125)
  • KC990 (125)
  • KCD25 (132)
  • KCK05 (132)
  • KCK05B (38)
  • KCK15 (132)
  • KCK15B (132)
  • KCK20 (132)
  • KCK20B (132)
  • KCM15 (132)
  • KCM15B (131)
  • KCM25 (132)
  • KCM25B (132)
  • KCM35 (45)
  • KCM35B (4)
  • KCP05 (132)
  • KCP05B (3)
  • KCP10 (132)
  • KCP10B (132)
  • KCP25 (132)
  • KCP25B (132)
  • KCP30 (131)
  • KCP30B (10)
  • KCPK05 (86)
  • KCS10 (132)
  • KCS10B (132)
  • KCU05 (72)
  • KCU10 (135)
  • KCU25 (134)
  • KCU45 (7)
  • KD050 (124)
  • KD081 (40)
  • KD100 (88)
  • KD105 (86)
  • KD120 (86)
  • KD1400 (127)
  • KD1405 (86)
  • KD1415 (49)
  • KD1425 (127)
  • KT125 (87)
  • KT150 (87)
  • KT175 (124)
  • KT315 (134)
  • KT325 (45)
  • KT6215 (1)
  • KT6225 (1)
  • KT6315 (2)
  • KTP10 (125)
  • KU10 (125)
  • KU10T (132)
  • KU30T (132)
  • NL300 (7)
  • NL920 (7)
  • PB100 (29)
  • PB170 (36)
  • PB250 (36)
  • PB300 (29)
  • PD100 (39)
  • PD50 (36)
  • SP0PW3 (7)
  • SP4019 (7)
  • SPM5F2 (2)
  • SPMQMA (10)
  • SPN3W1 (3)
  • THM (39)
  • THM-X (39)
  • TN1000 (29)
  • TN10P (39)
  • TN10U (39)
  • TN15M (39)
  • TN15U (32)
  • TN2000 (39)
  • TN20K (39)
  • TN20P (39)
  • TN30M (39)
  • TN4000 (32)
  • TN5015 (39)
  • TN5020 (39)
  • TN5105 (39)
  • TN5120 (39)
  • TN6010 (10)
  • TN6025 (3)
  • TN7005 (3)
  • TN7010 (39)
  • TN7015 (39)
  • TN7025 (39)
  • TN7035 (39)
  • TN7105 (39)
  • TN7110 (39)
  • TN7115 (39)
  • TN7125 (39)
  • TN7135 (39)
  • TN8025 (39)
  • TTI15 (32)
  • TTM (3)
  • TTR (39)
  • TTS (32)
  • TTX (3)
  • W00342 (7)
  • WBH10C (32)
  • WBH10P (32)
  • WBH10U (32)
  • WBH20P (10)
  • WBH25P (32)
  • WBH30P (3)
  • WBK45U (10)
  • WDN00U (32)
  • WDN25U (32)
  • WK05CT (39)
  • WK15CT (39)
  • WK20CT (39)
  • WM15CT (39)
  • WM25CT (39)
  • WP15CT (39)
  • WP20TT (29)
  • WP25CT (39)
  • WP35CT (10)
  • WS10PT (39)
  • WS25PT (32)
  • WU05PT (39)
  • WU10HT (39)
  • WU10PT (32)
  • WU20HT (29)
  • WU25PT (32)
  • YY3A00 (1)
Hand Of Tool
  • R (320)
Lead In Length
  • 0.0079 (45)
  • 0.01 (6)
  • 0.0197 (36)
  • 0.02 (76)
  • 0.03 (6)
  • 0.04 (10)
  • 0.043 (59)
  • 0.0433 (36)
  • 0.05 (8)
to
Lead in Length
  • 0.2 (45)
  • 0.3 (6)
  • 0.4 (10)
  • 0.5 (102)
  • 0.75 (6)
  • 0.95 (10)
  • 1.1 (95)
  • 1.15 (8)
to
Minimum Axial Groove Diameter
  • 0.08 (1)
  • 0.1575 (1)
  • 0.2362 (3)
  • 0.2363 (1)
  • 0.315 (2)
  • 0.3346 (1)
  • 0.335 (1)
  • 0.3937 (4)
  • 0.4331 (2)
  • 0.4724 (3)
  • 0.5315 (2)
  • 0.5511 (2)
  • 0.5512 (2)
  • 0.5906 (1)
  • 0.6299 (4)
  • 0.748 (1)
  • 0.7677 (1)
  • 0.7874 (1)
  • 0.8661 (1)
  • 0.8858 (1)
  • 0.9646 (1)
  • 0.9843 (3)
  • 1.0039 (2)
  • 1.1417 (2)
  • 1.1614 (2)
  • 1.3189 (1)
  • 1.3386 (2)
  • 1.4173 (2)
  • 1.5748 (1)
  • 1.5945 (1)
  • 1.6535 (1)
  • 1.6929 (2)
  • 1.791 (1)
  • 1.8504 (1)
  • 1.9291 (1)
  • 1.9685 (1)
  • 2.0472 (2)
  • 2.0866 (1)
  • 2.2244 (1)
  • 2.3622 (2)
  • 2.4016 (1)
  • 2.5591 (3)
  • 2.6772 (1)
  • 2.9921 (1)
  • 3.2283 (1)
  • 3.82 (1)
  • 3.937 (2)
  • 4.0748 (1)
  • 4.3307 (1)
  • 4.9213 (1)
  • 5.43 (1)
  • 5.4331 (2)
  • 7.874 (2)
to
Minimum Axial Groove Diameter
  • 2.0 (1)
  • 4.0 (1)
  • 6.0 (4)
  • 8.0 (2)
  • 8.5 (2)
  • 10.0 (4)
  • 11.0 (2)
  • 12.0 (3)
  • 13.5 (2)
  • 14.0 (4)
  • 15.0 (1)
  • 16.0 (4)
  • 19.0 (1)
  • 19.5 (1)
  • 20.0 (1)
  • 22.0 (1)
  • 22.5 (1)
  • 24.5 (1)
  • 25.0 (3)
  • 25.5 (2)
  • 29.0 (2)
  • 29.5 (2)
  • 33.5 (1)
  • 34.0 (2)
  • 36.0 (2)
  • 40.0 (1)
  • 40.5 (1)
  • 42.0 (1)
  • 43.0 (2)
  • 45.5 (1)
  • 47.0 (1)
  • 49.0 (1)
  • 50.0 (1)
  • 52.0 (2)
  • 53.0 (1)
  • 56.5 (1)
  • 60.0 (2)
  • 61.0 (1)
  • 65.0 (3)
  • 68.0 (1)
  • 76.0 (1)
  • 82.0 (1)
  • 97.0 (1)
  • 100.0 (2)
  • 103.5 (1)
  • 110.0 (1)
  • 125.0 (1)
  • 138.0 (3)
  • 200.0 (2)
to
Maximum Axial Groove Diameter
  • 7.0 (1)
  • 8.0 (2)
  • 9.0 (1)
  • 9.5 (1)
  • 10.0 (2)
  • 11.5 (1)
  • 12.0 (5)
  • 14.0 (4)
  • 14.5 (1)
  • 16.0 (4)
  • 16.5 (1)
  • 17.0 (1)
  • 19.5 (1)
  • 20.0 (4)
  • 22.5 (1)
  • 23.0 (1)
  • 25.0 (1)
  • 25.5 (1)
  • 26.0 (1)
  • 30.0 (2)
  • 33.5 (1)
  • 37.0 (2)
  • 41.0 (1)
  • 43.5 (1)
  • 44.0 (1)
  • 53.0 (1)
  • 54.0 (1)
  • 58.0 (1)
  • 65.0 (1)
  • 66.0 (2)
  • 77.0 (1)
  • 83.0 (1)
  • 100.0 (1)
  • 102.0 (1)
  • 103.0 (1)
  • 130.0 (1)
  • 152.0 (1)
  • 205.0 (2)
  • 1020.0 (2)
to