successfully added to cart
View Cart

PSC

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Applications
  • Back Boring Back Boring (1)
  • Facing Facing (194)
  • Grooving Grooving (17)
  • ID Facing ID Facing (172)
  • ID Grooving ID Grooving (21)
  • ID Thread Turning ID Thread Turning (25)
  • Multiple Direction Cutting Multiple Direction Cutting (212)
  • OD Thread Turning OD Thread Turning (7)
  • Plunge Turning Plunge Turning (57)
  • Profiling Profiling (24)
  • TRN Boring TRN Boring (172)
  • Turning Turning (201)
Workpiece Material
  • P Steel (262)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (262)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (262)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (262)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (262)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (262)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (262)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (262)
  • M Stainless Steel (262)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (262)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (262)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (262)
  • K Cast Iron (262)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (262)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (262)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (262)
  • N Non-Ferrous Materials (258)
    • N1
      Wrought Aluminum
      (256)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (256)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (163)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (256)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (256)
    • N6
      Carbon, Graphite Composites, CFRP
      (239)
    • N7
      MMC's
      (246)
  • S High-Temp Alloys (262)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (262)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (262)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (262)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (262)
  • H Hardened Materials (234)
    • H1
      Hardened Materials 44-48 HRC
      (234)
    • H2
      Hardened Materials 48-55 HRC
      (210)
    • H3
      Hardened Materials 56-60 HRC
      (198)
    • H4
      Hardened Materials >60 HRC
      (190)
Type of Thread
  • 55 (26)
  • 60 (62)
  • ACME (58)
  • API (39)
  • API BUTTRESS (7)
  • API RD (41)
  • BSPT (19)
  • BSW (48)
  • BUTTRESS (36)
  • M (51)
  • NPT (41)
  • NPTF (19)
  • RD DIN 405 (26)
  • STUB ACME (48)
  • TR DIN 103 (26)
  • UN (55)
  • UNJ (41)
Cutting Condition
  • Heavily Interrupted Cut (228)
  • Interrupted (128)
  • Lightly Interrupted Cut (228)
  • Smooth Cut (228)
  • Varying Depth of Cut (228)
Cutting Condition Material
  • H-All (201)
  • K-All (228)
  • K1 (46)
  • M-All (226)
  • N-All (217)
  • P-All (228)
  • S-All (224)
  • S2 (121)
  • S4 (67)
Tool Cutting Edge Angle
  • 45.0 (10)
  • 62.5 (3)
  • 72.5 (3)
  • 75.0 (18)
  • 90.0 (71)
  • 93.0 (65)
  • 95.0 (73)
  • 107.5 (21)
to
Connection Style
  • PSC (169)
Cutting Edges Per Insert
  • 1.0 (176)
  • 2.0 (203)
  • 3.0 (33)
  • 4.0 (147)
  • 6.0 (9)
  • 8.0 (83)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.03 (15)
  • 0.038 (43)
  • 0.051 (29)
  • 0.056 (7)
  • 0.057 (12)
  • 0.066 (22)
  • 0.07 (15)
  • 0.071 (2)
  • 0.076 (48)
  • 0.08 (36)
  • 0.081 (8)
  • 0.082 (2)
  • 0.085 (2)
  • 0.086 (2)
  • 0.089 (4)
  • 0.09 (4)
  • 0.091 (2)
  • 0.094 (22)
  • 0.097 (20)
  • 0.1 (134)
  • 0.102 (108)
  • 0.108 (8)
  • 0.116 (10)
  • 0.117 (12)
  • 0.127 (22)
  • 0.13 (1)
  • 0.131 (22)
  • 0.132 (22)
  • 0.133 (22)
  • 0.135 (2)
  • 0.15 (22)
  • 0.152 (15)
  • 0.155 (22)
  • 0.157 (22)
  • 0.159 (2)
  • 0.16 (18)
  • 0.165 (32)
  • 0.173 (22)
  • 0.178 (24)
  • 0.185 (3)
  • 0.19 (36)
  • 0.191 (36)
  • 0.198 (22)
  • 0.2 (143)
  • 0.202 (25)
  • 0.203 (73)
  • 0.21 (15)
  • 0.223 (2)
  • 0.224 (22)
  • 0.235 (22)
  • 0.24 (2)
  • 0.244 (10)
  • 0.25 (25)
  • 0.251 (22)
  • 0.254 (35)
  • 0.269 (24)
  • 0.279 (4)
  • 0.282 (22)
  • 0.284 (22)
  • 0.3 (22)
  • 0.305 (3)
  • 0.31 (2)
  • 0.315 (26)
  • 0.318 (34)
  • 0.33 (22)
  • 0.34 (54)
  • 0.343 (10)
  • 0.356 (22)
  • 0.381 (2)
  • 0.397 (143)
  • 0.4 (169)
  • 0.404 (22)
  • 0.406 (64)
  • 0.43 (22)
  • 0.432 (7)
  • 0.445 (32)
  • 0.472 (10)
  • 0.49 (22)
  • 0.5 (5)
  • 0.508 (22)
  • 0.533 (4)
  • 0.565 (4)
  • 0.57 (12)
  • 0.572 (32)
  • 0.575 (20)
  • 0.6 (7)
  • 0.7 (8)
  • 0.75 (4)
  • 0.76 (2)
  • 0.787 (26)
  • 0.79 (4)
  • 0.791 (8)
  • 0.792 (64)
  • 0.794 (148)
  • 0.795 (1)
  • 0.8 (191)
  • 0.902 (32)
  • 0.93 (2)
  • 0.936 (8)
  • 1.0 (27)
  • 1.01 (2)
  • 1.188 (36)
  • 1.19 (32)
  • 1.191 (141)
  • 1.194 (26)
  • 1.195 (12)
  • 1.2 (187)
  • 1.25 (26)
  • 1.404 (2)
  • 1.5 (26)
  • 1.515 (2)
  • 1.585 (22)
  • 1.587 (32)
  • 1.588 (125)
  • 1.59 (4)
  • 1.6 (139)
  • 1.75 (26)
  • 1.98 (12)
  • 1.981 (22)
  • 2.0 (32)
  • 2.25 (32)
  • 2.38 (17)
  • 2.381 (10)
  • 2.388 (32)
  • 2.39 (6)
  • 2.4 (43)
  • 2.5 (10)
  • 3.175 (10)
  • 3.18 (4)
  • 3.2 (25)
  • 4.0 (8)
  • 5.0 (1)
  • 6.0 (2)
  • 6.35 (2)
  • 7.94 (2)
  • 8.0 (2)
  • 10.0 (2)
to
Corner Radius
  • 0.001 (5)
  • 0.0011 (2)
  • 0.0012 (8)
  • 0.0015 (43)
  • 0.002 (29)
  • 0.0023 (12)
  • 0.0026 (22)
  • 0.0028 (17)
  • 0.003 (48)
  • 0.0031 (28)
  • 0.0032 (10)
  • 0.0033 (2)
  • 0.0034 (2)
  • 0.0035 (4)
  • 0.0037 (22)
  • 0.0038 (20)
  • 0.0039 (2)
  • 0.004 (172)
  • 0.0043 (8)
  • 0.0046 (22)
  • 0.005 (23)
  • 0.0052 (22)
  • 0.0053 (24)
  • 0.0059 (22)
  • 0.006 (37)
  • 0.0062 (22)
  • 0.0063 (10)
  • 0.0065 (32)
  • 0.0068 (22)
  • 0.007 (24)
  • 0.0075 (36)
  • 0.0078 (27)
  • 0.0079 (15)
  • 0.008 (150)
  • 0.0083 (47)
  • 0.0088 (24)
  • 0.0093 (22)
  • 0.0094 (2)
  • 0.0096 (10)
  • 0.0099 (22)
  • 0.01 (35)
  • 0.0106 (24)
  • 0.011 (4)
  • 0.0111 (22)
  • 0.0112 (22)
  • 0.0118 (22)
  • 0.012 (3)
  • 0.0122 (2)
  • 0.0124 (22)
  • 0.0125 (34)
  • 0.013 (54)
  • 0.0135 (32)
  • 0.014 (22)
  • 0.015 (2)
  • 0.0156 (169)
  • 0.0158 (5)
  • 0.0159 (22)
  • 0.016 (129)
  • 0.017 (29)
  • 0.0175 (32)
  • 0.0186 (10)
  • 0.0193 (22)
  • 0.0197 (5)
  • 0.02 (22)
  • 0.021 (4)
  • 0.022 (7)
  • 0.0225 (32)
  • 0.0276 (8)
  • 0.0295 (4)
  • 0.0298 (2)
  • 0.031 (141)
  • 0.0311 (8)
  • 0.0312 (148)
  • 0.0313 (191)
  • 0.0315 (68)
  • 0.0355 (32)
  • 0.0368 (2)
  • 0.0369 (8)
  • 0.0394 (27)
  • 0.0398 (2)
  • 0.0468 (36)
  • 0.0469 (187)
  • 0.047 (154)
  • 0.0472 (37)
  • 0.0492 (26)
  • 0.0516 (4)
  • 0.0553 (2)
  • 0.0591 (26)
  • 0.0597 (2)
  • 0.0625 (175)
  • 0.063 (114)
  • 0.0689 (26)
  • 0.078 (22)
  • 0.0787 (32)
  • 0.0886 (32)
  • 0.0938 (53)
  • 0.094 (60)
  • 0.0984 (10)
  • 0.106 (12)
  • 0.125 (10)
  • 0.126 (25)
  • 0.1563 (32)
  • 0.1575 (8)
  • 0.1969 (1)
  • 0.197 (1)
  • 0.2362 (2)
  • 0.25 (2)
  • 0.312 (32)
  • 0.3125 (2)
  • 0.315 (2)
  • 0.3935 (2)
  • 0.3937 (2)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (116)
  • 241 (32)
  • AC5 (4)
  • CG4 (2)
  • CL4 (89)
  • CM2 (109)
  • CM3 (93)
  • CM4 (53)
  • CM5 (6)
  • CPX (118)
  • CW2 (64)
  • CW2015 (112)
  • CW5025 (122)
  • GH1 (5)
  • GX (57)
  • HCK10 (18)
  • HCK20 (8)
  • HK1500 (120)
  • HK35 (10)
  • HT2 (113)
  • HTX (71)
  • HWK15 (18)
  • K060 (46)
  • K090 (125)
  • K1 (51)
  • K1010P (5)
  • K10M (160)
  • K10P (129)
  • K10U (126)
  • K15 (17)
  • K15U (126)
  • K20K (145)
  • K21 (55)
  • K25M (143)
  • K25P (137)
  • K2885 (26)
  • K313 (230)
  • K35P (78)
  • K420 (135)
  • K45 (52)
  • K4H (23)
  • K6 (1)
  • K68 (222)
  • KB1340 (46)
  • KB1345 (91)
  • KB1610 (92)
  • KB1625 (76)
  • KB1630 (92)
  • KB5610 (88)
  • KB5625 (107)
  • KB5630 (81)
  • KB9610 (124)
  • KB9640 (55)
  • KBH10 (126)
  • KBH10B (80)
  • KBH20 (130)
  • KBH20B (80)
  • KBK35 (32)
  • KC210 (97)
  • KC250 (115)
  • KC5010 (250)
  • KC5020P (27)
  • KC5025 (256)
  • KC5410 (212)
  • KC5510 (142)
  • KC5525 (93)
  • KC710 (84)
  • KC720 (189)
  • KC722 (78)
  • KC730 (221)
  • KC7310 (151)
  • KC732 (148)
  • KC8050 (200)
  • KC810 (226)
  • KC850 (232)
  • KC9010 (158)
  • KC9025 (193)
  • KC910 (205)
  • KC9105 (180)
  • KC9110 (235)
  • KC9120 (186)
  • KC9125 (199)
  • KC9125RR (4)
  • KC9140 (146)
  • KC9145 (126)
  • KC9210 (32)
  • KC9215 (144)
  • KC9225 (191)
  • KC9240 (188)
  • KC9240NEW (188)
  • KC9245 (144)
  • KC9315 (200)
  • KC9320 (222)
  • KC9325 (161)
  • KC935 (229)
  • KC950 (209)
  • KC990 (160)
  • KCD25 (56)
  • KCK05 (192)
  • KCK05B (171)
  • KCK15 (184)
  • KCK15B (197)
  • KCK20 (221)
  • KCK20B (224)
  • KCM15 (183)
  • KCM15B (180)
  • KCM25 (195)
  • KCM25B (183)
  • KCM35 (169)
  • KCM35B (129)
  • KCP05 (166)
  • KCP05B (130)
  • KCP10 (198)
  • KCP10B (235)
  • KCP15 (19)
  • KCP25 (199)
  • KCP25B (235)
  • KCP30 (190)
  • KCP30B (142)
  • KCP40 (124)
  • KCP40B (149)
  • KCPK05 (146)
  • KCS10 (78)
  • KCS10B (191)
  • KCU10 (236)
  • KCU25 (232)
  • KD050 (97)
  • KD081 (109)
  • KD100 (101)
  • KD120 (92)
  • KD1400 (90)
  • KD1405 (67)
  • KD1425 (119)
  • KM1 (46)
  • KMF (32)
  • KT1120 (32)
  • KT125 (96)
  • KT150 (59)
  • KT175 (145)
  • KT315 (188)
  • KT325 (113)
  • KT5020 (6)
  • KTP10 (45)
  • KU10 (35)
  • KU10T (178)
  • KU25T (46)
  • KU30T (219)
  • KY1310 (73)
  • KY1320 (122)
  • KY1540 (57)
  • KY1615 (120)
  • KY2000 (74)
  • KY2100 (46)
  • KY3000 (155)
  • KY3400 (92)
  • KY3500 (130)
  • KY4000 (59)
  • KY4300 (70)
  • KY4400 (121)
  • KYHK15B (121)
  • KYK10 (53)
  • KYK25 (84)
  • KYK35 (130)
  • KYS25 (57)
  • KYS30 (64)
  • MC2 (4)
  • NL200 (64)
  • NL250 (140)
  • NL300 (113)
  • NL400 (67)
  • NL920 (104)
  • P25 (53)
  • PB100 (37)
  • PB170 (36)
  • PB250 (41)
  • PB300 (32)
  • PD100 (18)
  • PD50 (10)
  • PN120 (2)
  • PS5 (74)
  • SP0819 (110)
  • SP0A00 (4)
  • SP0PW3 (4)
  • SP3019 (79)
  • SP4019 (87)
  • SP4036 (6)
  • SP4066 (7)
  • SP4093 (6)
  • SP61EJ (4)
  • SPADAP (19)
  • SPN3W1 (8)
  • SPN4W2 (8)
  • SPSREJ (3)
  • THM (153)
  • THM-X (48)
  • THMF-X (36)
  • TN10P (199)
  • TN10U (130)
  • TN15M (170)
  • TN15U (126)
  • TN2000 (132)
  • TN20K (173)
  • TN20P (185)
  • TN30M (180)
  • TN30P (124)
  • TN4000 (123)
  • TN5015 (144)
  • TN5020 (161)
  • TN5105 (112)
  • TN5120 (173)
  • TN6010 (133)
  • TN6025 (150)
  • TN7005 (125)
  • TN7010 (176)
  • TN7015 (176)
  • TN7025 (176)
  • TN7035 (154)
  • TN7105 (123)
  • TN7110 (191)
  • TN7115 (173)
  • TN7125 (166)
  • TN7135 (156)
  • TN8025 (151)
  • TTI15 (108)
  • TTM (8)
  • TTM09 (15)
  • TTR (54)
  • TTR-X (8)
  • TTS (97)
  • TTX (97)
  • W00342 (18)
  • WBH10C (123)
  • WBH10P (81)
  • WBH10U (92)
  • WBH20P (109)
  • WBH25P (85)
  • WBH25U (103)
  • WBH30P (81)
  • WBK40U (46)
  • WBK45U (91)
  • WDN00U (50)
  • WDN25U (90)
  • WK05CT (162)
  • WK15CT (116)
  • WK20CT (186)
  • WM15CT (181)
  • WM25CT (181)
  • WM35CT (142)
  • WP05CT (39)
  • WP15CT (188)
  • WP20TT (15)
  • WP25CT (188)
  • WP35CT (186)
  • WS10PT (156)
  • WS25PT (155)
  • WU05PT (18)
  • WU10HT (183)
  • WU10PT (136)
  • WU25PT (137)
  • X00511 (32)
Hand Of Tool
  • L (75)
  • N (10)
  • R (84)
Minimum Axial Groove Diameter
  • 0.0 (14)
  • 0.7874 (6)
  • 0.9449 (2)
  • 0.9646 (1)
  • 0.9843 (7)
  • 1.2598 (21)
  • 1.2992 (3)
  • 1.3189 (1)
  • 1.3386 (2)
  • 1.5157 (4)
  • 1.5748 (19)
  • 1.626 (4)
  • 1.874 (4)
  • 1.8898 (3)
  • 1.9094 (3)
  • 1.9685 (21)
  • 1.969 (2)
  • 2.0669 (1)
  • 2.0866 (1)
  • 2.252 (3)
  • 2.4409 (3)
  • 2.48 (2)
  • 2.4803 (10)
  • 2.5197 (2)
  • 2.5591 (6)
  • 2.5787 (1)
  • 2.5984 (1)
  • 3.1496 (2)
  • 3.189 (3)
  • 3.5 (4)
  • 3.5433 (7)
  • 4.3307 (50)
  • 4.331 (8)
  • 4.921 (1)
  • 4.9213 (20)
  • 5.5 (4)
  • 6.4961 (1)
  • 6.874 (4)
  • 8.252 (3)
  • 8.2677 (2)
  • 8.465 (2)
  • 8.752 (3)
  • 8.7795 (2)
to
Minimum Axial Groove Diameter
  • 0.0 (7)
  • 20.0 (6)
  • 24.0 (2)
  • 24.5 (1)