successfully added to cart
View Cart

Grooving and Cut-Off

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Select First Choice
  • CN (473)
  • DE (501)
  • GB (280)
  • IN (113)
  • US (598)
Applications
  • Back Boring Back Boring (143)
  • Boring Boring (1466)
  • CRT Profiling CRT Profiling (2)
  • Cut-Off Cut-Off (1185)
  • Deep Grooving Deep Grooving (72)
  • Drilling Drilling (1)
  • Face Grooving Face Grooving (3126)
  • Facing Facing (300)
  • Grooving Grooving (3502)
  • ID Facing ID Facing (275)
  • ID Grooving ID Grooving (2396)
  • ID Thread Turning ID Thread Turning (108)
  • Multiple Direction Cutting Multiple Direction Cutting (492)
  • OD Thread Turning OD Thread Turning (127)
  • Plunge Turning Plunge Turning (2297)
  • Profiling Profiling (362)
  • TRN Boring TRN Boring (44)
  • Threading Threading (130)
  • Turning Turning (1580)
Workpiece Material
  • P Steel (3546)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (3546)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (3546)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (3546)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (3546)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (3546)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (3546)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (3546)
  • M Stainless Steel (3116)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (3116)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (3116)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (3116)
  • K Cast Iron (3501)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (3501)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (3481)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (3469)
  • N Non-Ferrous Materials (3277)
    • N1
      Wrought Aluminum
      (3269)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (3074)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (364)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (3277)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (3082)
    • N6
      Carbon, Graphite Composites, CFRP
      (3074)
    • N7
      MMC's
      (356)
  • S High-Temp Alloys (3313)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (3313)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (3313)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (3313)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (3283)
  • H Hardened Materials (2049)
    • H1
      Hardened Materials 44-48 HRC
      (2049)
    • H2
      Hardened Materials 48-55 HRC
      (1804)
    • H3
      Hardened Materials 56-60 HRC
      (338)
    • H4
      Hardened Materials >60 HRC
      (338)
Cutting Length
  • 26.0 (1)
to
Type of Thread
  • 60 (187)
  • ACME (122)
  • API (114)
  • API RD (86)
  • BSW (78)
  • BUTTRESS (182)
  • M (114)
  • NPT (78)
  • STUB ACME (78)
  • UN (182)
  • UNJ (78)
Cutting Condition
  • Heavily Interrupted Cut (3048)
  • Lightly Interrupted Cut (3200)
  • Smooth Cut (3700)
  • Varying Depth of Cut (3503)
Cutting Condition Material
  • H-All (2139)
  • K-All (3338)
  • M-All (3018)
  • N-All (3126)
  • P-All (3275)
  • S-All (3136)
Tool Cutting Edge Angle
  • 45.0 (20)
  • 90.0 (1397)
  • 92.25 (26)
to
Connection Style
  • Bolt-On Head (6)
  • Boring Bar Shank (186)
  • Cutoff Support Blade A1-A3 (86)
  • Toolholder (800)
Cutting Edges Per Insert
  • 1.0 (1915)
  • 2.0 (2260)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.0 (27)
  • 0.051 (40)
  • 0.057 (38)
  • 0.066 (78)
  • 0.076 (187)
  • 0.08 (151)
  • 0.089 (166)
  • 0.09 (122)
  • 0.094 (78)
  • 0.097 (38)
  • 0.1 (166)
  • 0.102 (146)
  • 0.116 (40)
  • 0.117 (38)
  • 0.127 (78)
  • 0.131 (78)
  • 0.132 (78)
  • 0.133 (78)
  • 0.15 (134)
  • 0.155 (78)
  • 0.157 (78)
  • 0.16 (36)
  • 0.165 (114)
  • 0.173 (78)
  • 0.178 (78)
  • 0.185 (87)
  • 0.19 (399)
  • 0.191 (732)
  • 0.198 (78)
  • 0.2 (1163)
  • 0.202 (114)
  • 0.203 (229)
  • 0.224 (78)
  • 0.235 (78)
  • 0.244 (40)
  • 0.25 (125)
  • 0.251 (78)
  • 0.254 (167)
  • 0.269 (78)
  • 0.282 (78)
  • 0.284 (78)
  • 0.3 (424)
  • 0.315 (143)
  • 0.318 (155)
  • 0.33 (78)
  • 0.34 (78)
  • 0.343 (36)
  • 0.356 (78)
  • 0.38 (1)
  • 0.4 (1209)
  • 0.404 (78)
  • 0.406 (86)
  • 0.43 (78)
  • 0.445 (114)
  • 0.472 (40)
  • 0.49 (78)
  • 0.5 (75)
  • 0.508 (82)
  • 0.565 (23)
  • 0.57 (44)
  • 0.572 (294)
  • 0.575 (89)
  • 0.75 (70)
  • 0.787 (209)
  • 0.79 (192)
  • 0.794 (184)
  • 0.8 (845)
  • 0.826 (13)
  • 0.84 (52)
  • 0.902 (114)
  • 1.0 (340)
  • 1.06 (174)
  • 1.18 (30)
  • 1.19 (156)
  • 1.194 (186)
  • 1.195 (43)
  • 1.2 (150)
  • 1.21 (13)
  • 1.22 (18)
  • 1.25 (147)
  • 1.5 (466)
  • 1.525 (72)
  • 1.56 (235)
  • 1.585 (92)
  • 1.588 (316)
  • 1.59 (323)
  • 1.65 (233)
  • 1.75 (147)
  • 1.98 (41)
  • 1.981 (90)
  • 2.0 (362)
  • 2.025 (59)
  • 2.06 (191)
  • 2.25 (114)
  • 2.37 (185)
  • 2.38 (243)
  • 2.388 (155)
  • 2.39 (21)
  • 2.44 (190)
  • 2.5 (255)
  • 2.525 (49)
  • 2.56 (171)
  • 2.781 (1)
  • 3.0 (178)
  • 3.025 (45)
  • 3.06 (137)
  • 3.17 (136)
  • 3.175 (106)
  • 3.18 (63)
  • 3.24 (133)
  • 3.96 (35)
  • 3.969 (17)
  • 3.97 (16)
  • 4.0 (52)
  • 4.025 (23)
  • 4.03 (33)
  • 4.06 (37)
  • 4.76 (11)
  • 4.763 (12)
  • 5.0 (13)
  • 5.025 (15)
to
Corner Radius
  • 0.0 (27)
  • 0.002 (40)
  • 0.0023 (38)
  • 0.0026 (78)
  • 0.003 (187)
  • 0.0031 (151)
  • 0.0035 (220)
  • 0.0037 (78)
  • 0.0038 (38)
  • 0.004 (166)
  • 0.0046 (78)
  • 0.005 (188)
  • 0.0052 (78)
  • 0.0053 (78)
  • 0.0059 (84)
  • 0.006 (131)
  • 0.0062 (78)
  • 0.0065 (114)
  • 0.0068 (78)
  • 0.007 (78)
  • 0.0075 (1000)
  • 0.0076 (226)
  • 0.0078 (78)
  • 0.0079 (271)
  • 0.008 (1192)
  • 0.0088 (78)
  • 0.0093 (78)
  • 0.0096 (40)
  • 0.0099 (78)
  • 0.01 (178)
  • 0.0106 (78)
  • 0.0111 (78)
  • 0.0112 (78)
  • 0.0118 (78)
  • 0.012 (346)
  • 0.0124 (78)
  • 0.0125 (201)
  • 0.013 (78)
  • 0.0135 (114)
  • 0.014 (78)
  • 0.015 (110)
  • 0.0156 (414)
  • 0.0157 (579)
  • 0.0158 (185)
  • 0.0159 (78)
  • 0.016 (1259)
  • 0.017 (78)
  • 0.0175 (114)
  • 0.0186 (40)
  • 0.0193 (78)
  • 0.0197 (75)
  • 0.02 (82)
  • 0.0225 (317)
  • 0.0295 (70)
  • 0.03 (128)
  • 0.031 (1010)
  • 0.0312 (109)
  • 0.0313 (184)
  • 0.0315 (334)
  • 0.032 (607)
  • 0.0325 (13)
  • 0.033 (52)
  • 0.0355 (114)
  • 0.039 (187)
  • 0.0394 (153)
  • 0.042 (174)
  • 0.046 (30)
  • 0.047 (461)
  • 0.048 (31)
  • 0.0492 (147)
  • 0.059 (296)
  • 0.0591 (234)
  • 0.06 (72)
  • 0.062 (302)
  • 0.0625 (336)
  • 0.063 (295)
  • 0.065 (233)
  • 0.0689 (147)
  • 0.078 (93)
  • 0.0785 (61)
  • 0.0787 (116)
  • 0.079 (237)
  • 0.0797 (59)
  • 0.081 (191)
  • 0.0886 (114)
  • 0.093 (185)
  • 0.0937 (1)
  • 0.094 (401)
  • 0.096 (190)
  • 0.098 (209)
  • 0.0984 (85)
  • 0.0985 (43)
  • 0.0994 (49)
  • 0.101 (171)
  • 0.106 (38)
  • 0.1095 (1)
  • 0.115 (39)
  • 0.118 (172)
  • 0.1181 (43)
  • 0.1191 (45)
  • 0.121 (137)
  • 0.125 (248)
  • 0.127 (130)
  • 0.128 (131)
  • 0.155 (17)
  • 0.156 (51)
  • 0.1565 (17)
  • 0.157 (31)
  • 0.1575 (19)
  • 0.158 (48)
  • 0.1585 (23)
  • 0.159 (30)
  • 0.16 (37)
  • 0.1875 (12)
  • 0.188 (11)
  • 0.1969 (11)
  • 0.197 (13)
  • 0.1978 (15)
  • 0.787 (111)
to
Corner Chamfer
  • 0.0 (3109)
to
Corner Chamfer
  • 0.0 (3109)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
  • Heavily Interrupted Cut (1597)
  • Lightly Interrupted Cut (1749)
  • Smooth Cut (2249)
  • Varying Depth of Cut (2052)
Grade Of Cutting Tool
  • K1 (5)
  • K1025 (106)
  • K2885 (146)
  • K313 (1430)
  • K420 (216)
  • K4H (110)
  • K68 (303)
  • KB1345 (114)
  • KB1630 (329)
  • KB5625 (282)
  • KC250 (151)
  • KC5010 (705)
  • KC5025 (823)
  • KC5410 (186)
  • KC710 (182)
  • KC720 (213)
  • KC722 (182)
  • KC730 (417)
  • KC732 (78)
  • KC810 (198)
  • KC850 (340)
  • KC910 (110)
  • KC9110 (460)
  • KC9120 (78)
  • KC9125 (278)
  • KC9320 (182)
  • KC935 (182)
  • KC950 (182)
  • KCK20 (380)
  • KCK20B (1123)
  • KCM35B (726)
  • KCP10 (310)
  • KCP10B (1185)
  • KCP25 (312)
  • KCP25B (1241)
  • KCU10 (1788)
  • KCU25 (2120)
  • KD050 (40)
  • KD081 (78)
  • KD100 (97)
  • KD120 (114)
  • KD1405 (161)
  • KD1425 (86)
  • KMF (33)
  • KMS (105)
  • KT175 (146)
  • KT315 (486)
  • KU10 (277)
  • KU10T (182)
  • KU25T (182)
  • KU30T (377)
  • KY3000 (114)
  • KY3500 (234)
  • KY4300 (6)
  • KYS30 (99)
  • SP88F8 (38)
Hand Of Tool
  • L (482)
  • N (60)
  • N - Neutral (3)
  • R (533)
Minimum Axial Groove Diameter
  • 0.0 (147)
  • 0.44 (2)
  • 0.453 (2)
  • 0.625 (4)
  • 0.6299 (4)
  • 0.63 (4)
  • 0.6693 (3)
  • 0.728 (2)
  • 0.73 (4)
  • 0.787 (13)
  • 0.7874 (4)
  • 0.8 (1)
  • 0.8268 (3)
  • 0.866 (2)
  • 0.8661 (1)
  • 0.984 (16)
  • 0.9843 (15)
  • 1.0 (6)
  • 1.02 (1)
  • 1.0236 (5)
  • 1.024 (5)
  • 1.125 (4)
  • 1.177 (1)
  • 1.181 (7)
  • 1.25 (6)
  • 1.2598 (6)
  • 1.26 (11)
  • 1.299 (4)
  • 1.339 (4)
  • 1.375 (6)
  • 1.378 (8)
  • 1.4173 (5)
  • 1.496 (1)
  • 1.5 (8)
  • 1.5748 (5)
  • 1.575 (22)
  • 1.61 (1)
  • 1.614 (3)
  • 1.626 (57)
  • 1.6535 (5)
  • 1.732 (2)
  • 1.7323 (4)
  • 1.75 (2)
  • 1.874 (56)
  • 1.8898 (3)
  • 1.9685 (6)
  • 1.969 (28)
  • 2.0 (2)
  • 2.047 (5)
  • 2.0472 (8)
  • 2.126 (4)
  • 2.2 (3)
  • 2.229 (49)
  • 2.25 (6)
  • 2.252 (29)
  • 2.2835 (4)
  • 2.362 (48)
  • 2.3622 (6)
  • 2.375 (4)
  • 2.5 (22)
  • 2.5197 (4)
  • 2.559 (1)
  • 2.6772 (4)
  • 2.75 (4)
  • 2.7559 (8)
  • 2.9528 (6)
  • 2.953 (52)
  • 3.0 (8)
  • 3.1496 (7)
  • 3.15 (4)
  • 3.25 (4)
  • 3.5 (535)
  • 3.5433 (7)
  • 3.622 (3)
  • 3.937 (70)
  • 4.7244 (11)
  • 5.0 (1)
  • 5.1181 (4)
  • 5.1969 (4)
  • 5.5 (733)
  • 5.75 (3)
  • 6.874 (125)
  • 7.0866 (3)
  • 7.087 (67)
  • 7.2441 (3)
  • 7.874 (7)
  • 8.252 (236)
  • 8.752 (58)
  • 9.8425 (9)
  • 9.843 (62)
  • 11.4173 (6)
  • 13.11 (4)
  • 13.7795 (3)
  • 13.78 (63)
to
Minimum Axial Groove Diameter
  • 0.0 (147)
  • 11.176 (1)
  • 11.18 (1)
  • 11.5 (2)
  • 15.88 (4)
  • 16.0 (8)
  • 17.0 (3)
  • 18.5 (2)
  • 18.542 (4)
  • 19.99 (1)
  • 20.0 (16)
  • 20.32 (1)
  • 21.0 (3)
  • 22.0 (3)
  • 24.994 (1)
  • 25.0 (30)
  • 25.4 (6)
  • 26.0 (11)
  • 28.575 (3)
  • 28.58 (1)
  • 30.0 (8)
  • 31.75 (6)
  • 32.0 (17)
  • 33.0 (4)
  • 34.0 (4)
  • 34.92 (2)
  • 34.925 (4)
  • 35.0 (8)
  • 36.0 (5)
  • 37.998 (1)
  • 38.1 (8)
  • 40.0 (27)
  • 41.0 (4)
  • 41.3 (57)
  • 42.0 (5)
  • 44.0 (6)
  • 44.45 (2)
  • 47.6 (56)
  • 48.0 (3)
  • 50.0 (34)
  • 50.8 (2)
  • 52.0 (13)
  • 54.0 (4)
  • 55.88 (3)
  • 56.625 (49)
  • 57.15 (6)
  • 57.2 (29)
  • 58.0 (4)
  • 60.0 (54)
  • 60.325 (4)
  • 63.5 (22)
  • 64.0 (4)
  • 65.0 (1)
  • 68.0 (4)
  • 69.85 (4)
  • 70.0 (8)
  • 75.0 (58)
  • 76.2 (8)
  • 80.0 (11)
  • 82.55 (4)
  • 88.9 (535)
  • 90.0 (7)
  • 92.0 (3)
  • 100.0 (70)
  • 120.0 (11)
  • 127.0 (1)
  • 130.0 (4)
  • 132.0 (4)
  • 139.7 (733)
  • 146.05 (3)
  • 174.6 (125)
  • 180.0 (70)
  • 184.0 (3)
  • 200.0 (7)
  • 209.6 (236)
  • 222.3 (58)
  • 250.0 (71)
  • 290.0 (6)
  • 333.0 (4)
  • 350.0 (66)