Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

GOdrill

  • Ekonomiczne rozwiązanie, jednokrotne.
  • Wiercenie wiertłami węglikowymi o średnicy 1–20 mm (0,0394 ”-0,7874”) i możliwości wiercenia 8 X D.
  • Konstrukcja bez łysinek zmniejsza tarcie i ciepło.
  • Chłodzenie wewnętrzne dostępne od 1mm (0.0394”).
  • Pokrycie TiN  jako wskaźnik zużycia.

GOdrill • Mikrowiertła

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (2184)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2184)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2184)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (2184)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (2184)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (2184)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (2184)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (2184)
  • M Stainless Steel (2184)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (2184)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (2184)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (2184)
  • K Cast Iron (2184)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (2184)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (2184)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (2184)
  • N Non-Ferrous Materials (2184)
    • N1
      Wrought Aluminum
      (2184)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (2184)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (2184)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (2184)
  • S High-Temp Alloys (2184)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (2184)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (2184)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (2184)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (2184)
  • H Hardened Materials (2184)
    • H1
      Hardened Materials 44-48 HRC
      (2184)
    • H2
      Hardened Materials 48-55 HRC
      (2184)
Select First Choice
  • CN (587)
  • DE (568)
  • GB (119)
  • IN (128)
  • US (775)
Applications
  • Convex Drilling Convex Drilling (2184)
  • Corner Style SquareEnd Drilling Corner Style SquareEnd Drilling (2184)
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (2184)
  • Counterboring Counterboring (2184)
  • Countersinking Countersinking (2184)
  • Drilling Drilling (2184)
  • Flat Bottom Drilling Flat Bottom Drilling (2184)
  • Inclined Entry Drilling Inclined Entry Drilling (2184)
  • Inclined Exit Drilling Inclined Exit Drilling (2184)
  • Pre-Condition Pre-Condition (2184)
  • Stacked Plates Drilling Stacked Plates Drilling (2184)
  • X-Offset Drilling X-Offset Drilling (2184)
Cutting Diameter
  • 1.0 (6)
  • 1.016 (6)
  • 1.041 (5)
  • 1.067 (6)
  • 1.092 (5)
  • 1.1 (6)
  • 1.181 (6)
  • 1.1906 (6)
  • 1.2 (6)
  • 1.3 (6)
  • 1.321 (6)
  • 1.397 (6)
  • 1.4 (6)
  • 1.5 (5)
  • 1.6 (5)
  • 1.7 (5)
  • 1.8 (5)
  • 1.9 (5)
  • 1.9844 (5)
  • 2.0 (5)
  • 2.1 (5)
  • 2.2 (5)
  • 2.3 (5)
  • 2.383 (5)
  • 2.4 (5)
  • 2.439 (5)
  • 2.489 (5)
  • 2.5 (5)
  • 2.578 (5)
  • 2.6 (5)
  • 2.642 (5)
  • 2.7 (5)
  • 2.705 (5)
  • 2.779 (5)
  • 2.8 (5)
  • 2.82 (5)
  • 2.87 (5)
  • 2.9 (5)
  • 2.947 (5)
  • 3.0 (10)
  • 3.048 (5)
  • 3.1 (10)
  • 3.175 (5)
  • 3.2 (10)
  • 3.264 (5)
  • 3.3 (10)
  • 3.4 (10)
  • 3.455 (5)
  • 3.5 (10)
  • 3.571 (5)
  • 3.6 (10)
  • 3.658 (5)
  • 3.7 (10)
  • 3.734 (5)
  • 3.8 (10)
  • 3.9 (10)
  • 3.97 (5)
  • 4.0 (10)
  • 4.039 (5)
  • 4.09 (5)
  • 4.1 (10)
  • 4.2 (10)
  • 4.217 (5)
  • 4.3 (10)
  • 4.3656 (5)
  • 4.4 (10)
  • 4.5 (10)
  • 4.6 (10)
  • 4.623 (5)
  • 4.7 (10)
  • 4.763 (5)
  • 4.8 (10)
  • 4.852 (5)
  • 4.9 (10)
  • 5.0 (10)
  • 5.1 (10)
  • 5.106 (5)
  • 5.1594 (5)
  • 5.2 (10)
  • 5.3 (10)
  • 5.4 (10)
  • 5.41 (5)
  • 5.5 (10)
  • 5.558 (5)
  • 5.6 (10)
  • 5.616 (5)
  • 5.7 (10)
  • 5.8 (10)
  • 5.9 (10)
  • 5.954 (5)
  • 6.0 (10)
  • 6.1 (10)
  • 6.2 (10)
  • 6.3 (10)
  • 6.35 (5)
  • 6.4 (10)
  • 6.5 (10)
  • 6.528 (5)
  • 6.6 (10)
  • 6.63 (5)
  • 6.7 (10)
  • 6.746 (5)
  • 6.8 (10)
  • 6.9 (10)
  • 7.0 (9)
  • 7.1 (10)
  • 7.145 (5)
  • 7.2 (10)
  • 7.3 (10)
  • 7.4 (10)
  • 7.5 (10)
  • 7.5406 (5)
  • 7.6 (10)
  • 7.7 (10)
  • 7.8 (10)
  • 7.9 (10)
  • 7.9375 (5)
  • 8.0 (10)
  • 8.1 (10)
  • 8.2 (10)
  • 8.3 (10)
  • 8.3344 (5)
  • 8.4 (10)
  • 8.433 (5)
  • 8.5 (10)
  • 8.6 (10)
  • 8.7 (10)
  • 8.733 (5)
  • 8.8 (10)
  • 8.9 (10)
  • 9.0 (10)
  • 9.1 (10)
  • 9.129 (5)
  • 9.2 (10)
  • 9.3 (10)
  • 9.347 (5)
  • 9.4 (10)
  • 9.5 (10)
  • 9.525 (5)
  • 9.6 (10)
  • 9.7 (10)
  • 9.8 (10)
  • 9.9 (10)
  • 9.921 (5)
  • 10.0 (10)
  • 10.1 (10)
  • 10.2 (10)
  • 10.3 (10)
  • 10.32 (5)
  • 10.4 (10)
  • 10.5 (10)
  • 10.6 (10)
  • 10.7 (10)
  • 10.7156 (5)
  • 10.8 (10)
  • 10.9 (10)
  • 11.0 (10)
  • 11.1 (10)
  • 11.113 (5)
  • 11.2 (10)
  • 11.3 (10)
  • 11.4 (10)
  • 11.5 (10)
  • 11.5094 (5)
  • 11.6 (10)
  • 11.7 (10)
  • 11.8 (10)
  • 11.9 (10)
  • 11.908 (5)
  • 12.0 (10)
  • 12.1 (10)
  • 12.2 (10)
  • 12.3 (10)
  • 12.304 (5)
  • 12.4 (10)
  • 12.5 (10)
  • 12.6 (10)
  • 12.7 (10)
  • 12.8 (10)
  • 12.9 (10)
  • 13.0 (10)
  • 13.096 (5)
  • 13.1 (10)
  • 13.2 (10)
  • 13.3 (10)
  • 13.4 (10)
  • 13.5 (10)
  • 13.6 (10)
  • 13.7 (10)
  • 13.8 (10)
  • 13.8906 (5)
  • 13.9 (10)
  • 14.0 (10)
  • 14.1 (10)
  • 14.2 (10)
  • 14.288 (5)
  • 14.3 (10)
  • 14.4 (10)
  • 14.5 (10)
  • 14.6 (10)
  • 14.6844 (5)
  • 14.7 (10)
  • 14.8 (10)
  • 14.9 (10)
  • 15.0 (10)
  • 15.083 (5)
  • 15.1 (10)
  • 15.2 (10)
  • 15.3 (10)
  • 15.4 (10)
  • 15.479 (5)
  • 15.5 (10)
  • 15.6 (10)
  • 15.7 (10)
  • 15.8 (10)
  • 15.875 (5)
  • 15.9 (10)
  • 16.0 (10)
  • 16.1 (10)
  • 16.2 (10)
  • 16.271 (5)
  • 16.3 (10)
  • 16.4 (10)
  • 16.5 (10)
  • 16.6 (10)
  • 16.67 (5)
  • 16.7 (10)
  • 16.8 (10)
  • 16.9 (10)
  • 17.0 (10)
  • 17.1 (10)
  • 17.2 (10)
  • 17.3 (10)
  • 17.4 (10)
  • 17.463 (5)
  • 17.5 (10)
  • 17.6 (10)
  • 17.7 (10)
  • 17.8 (10)
  • 17.8594 (5)
  • 17.9 (10)
  • 18.0 (10)
  • 18.1 (10)
  • 18.2 (10)
  • 18.258 (5)
  • 18.3 (10)
  • 18.4 (10)
  • 18.5 (10)
  • 18.6 (10)
  • 18.654 (5)
  • 18.7 (10)
  • 18.8 (10)
  • 18.9 (10)
  • 19.0 (10)
  • 19.05 (5)
  • 19.1 (10)
  • 19.2 (10)
  • 19.3 (10)
  • 19.4 (10)
  • 19.5 (10)
  • 19.6 (10)
  • 19.7 (10)
  • 19.8 (10)
  • 19.9 (10)
  • 20.0 (10)
to
Cutting Diameter
  • 0.0394 (6)
  • 0.04 (6)
  • 0.041 (5)
  • 0.042 (6)
  • 0.043 (5)
  • 0.0433 (6)
  • 0.0465 (6)
  • 0.0469 (6)
  • 0.0472 (6)
  • 0.0512 (6)
  • 0.052 (6)
  • 0.055 (6)
  • 0.0551 (6)
  • 0.0591 (5)
  • 0.063 (5)
  • 0.0669 (5)
  • 0.0709 (5)
  • 0.0748 (5)
  • 0.0781 (5)
  • 0.0787 (5)
  • 0.0827 (5)
  • 0.0866 (5)
  • 0.0906 (5)
  • 0.0938 (5)
  • 0.0945 (5)
  • 0.096 (5)
  • 0.098 (5)
  • 0.0984 (5)
  • 0.1015 (5)
  • 0.1024 (5)
  • 0.104 (5)
  • 0.1063 (5)
  • 0.1065 (5)
  • 0.1094 (5)
  • 0.1102 (5)
  • 0.111 (5)
  • 0.113 (5)
  • 0.1142 (5)
  • 0.116 (5)
  • 0.1181 (10)
  • 0.12 (5)
  • 0.122 (10)
  • 0.125 (5)
  • 0.126 (10)
  • 0.1285 (5)
  • 0.1299 (10)
  • 0.1339 (10)
  • 0.136 (5)
  • 0.1378 (10)
  • 0.1406 (5)
  • 0.1417 (10)
  • 0.144 (5)
  • 0.1457 (10)
  • 0.147 (5)
  • 0.1496 (10)
  • 0.1535 (10)
  • 0.1563 (5)
  • 0.1575 (10)
  • 0.159 (5)
  • 0.161 (5)
  • 0.1614 (10)
  • 0.1654 (10)
  • 0.166 (5)
  • 0.1693 (10)
  • 0.1719 (5)
  • 0.1732 (10)
  • 0.1772 (10)
  • 0.1811 (10)
  • 0.182 (5)
  • 0.185 (10)
  • 0.1875 (5)
  • 0.189 (10)
  • 0.191 (5)
  • 0.1929 (10)
  • 0.1969 (10)
  • 0.2008 (10)
  • 0.201 (5)
  • 0.2031 (5)
  • 0.2047 (10)
  • 0.2087 (10)
  • 0.2126 (10)
  • 0.213 (5)
  • 0.2165 (10)
  • 0.2188 (5)
  • 0.2205 (10)
  • 0.2211 (5)
  • 0.2244 (10)
  • 0.2283 (10)
  • 0.2323 (10)
  • 0.2344 (5)
  • 0.2362 (10)
  • 0.2402 (10)
  • 0.2441 (10)
  • 0.248 (10)
  • 0.25 (5)
  • 0.252 (10)
  • 0.2559 (10)
  • 0.257 (5)
  • 0.2598 (10)
  • 0.261 (5)
  • 0.2638 (10)
  • 0.2656 (5)
  • 0.2677 (10)
  • 0.2717 (10)
  • 0.2756 (9)
  • 0.2795 (10)
  • 0.2813 (5)
  • 0.2835 (10)
  • 0.2874 (10)
  • 0.2913 (10)
  • 0.2953 (10)
  • 0.2969 (5)
  • 0.2992 (10)
  • 0.3031 (10)
  • 0.3071 (10)
  • 0.311 (10)
  • 0.3125 (5)
  • 0.315 (10)
  • 0.3189 (10)
  • 0.3228 (10)
  • 0.3268 (10)
  • 0.3281 (5)
  • 0.3307 (10)
  • 0.332 (5)
  • 0.3346 (10)
  • 0.3386 (10)
  • 0.3425 (10)
  • 0.3438 (5)
  • 0.3465 (10)
  • 0.3504 (10)
  • 0.3543 (10)
  • 0.3583 (10)
  • 0.3594 (5)
  • 0.3622 (10)
  • 0.3661 (10)
  • 0.368 (5)
  • 0.3701 (10)
  • 0.374 (10)
  • 0.375 (5)
  • 0.378 (10)
  • 0.3819 (10)
  • 0.3858 (10)
  • 0.3898 (10)
  • 0.3906 (5)
  • 0.3937 (10)
  • 0.3976 (10)
  • 0.4016 (10)
  • 0.4055 (10)
  • 0.4063 (5)
  • 0.4094 (10)
  • 0.4134 (10)
  • 0.4173 (10)
  • 0.4213 (10)
  • 0.4219 (5)
  • 0.4252 (10)
  • 0.4291 (10)
  • 0.4331 (10)
  • 0.437 (10)
  • 0.4375 (5)
  • 0.4409 (10)
  • 0.4449 (10)
  • 0.4488 (10)
  • 0.4528 (10)
  • 0.4531 (5)
  • 0.4567 (10)
  • 0.4606 (10)
  • 0.4646 (10)
  • 0.4685 (10)
  • 0.4688 (5)
  • 0.4724 (10)
  • 0.4764 (10)
  • 0.4803 (10)
  • 0.4843 (10)
  • 0.4844 (5)
  • 0.4882 (10)
  • 0.4921 (10)
  • 0.4961 (10)
  • 0.5 (10)
  • 0.5039 (10)
  • 0.5079 (10)
  • 0.5118 (10)
  • 0.5156 (5)
  • 0.5157 (10)
  • 0.5197 (10)
  • 0.5236 (10)
  • 0.5276 (10)
  • 0.5315 (10)
  • 0.5354 (10)
  • 0.5394 (10)
  • 0.5433 (10)
  • 0.5469 (5)
  • 0.5472 (10)
  • 0.5512 (10)
  • 0.5551 (10)
  • 0.5591 (10)
  • 0.5625 (5)
  • 0.563 (10)
  • 0.5669 (10)
  • 0.5709 (10)
  • 0.5748 (10)
  • 0.5781 (5)
  • 0.5787 (10)
  • 0.5827 (10)
  • 0.5866 (10)
  • 0.5906 (10)
  • 0.5938 (5)
  • 0.5945 (10)
  • 0.5984 (10)
  • 0.6024 (10)
  • 0.6063 (10)
  • 0.6094 (5)
  • 0.6102 (10)
  • 0.6142 (10)
  • 0.6181 (10)
  • 0.622 (10)
  • 0.625 (5)
  • 0.626 (10)
  • 0.6299 (10)
  • 0.6339 (10)
  • 0.6378 (10)
  • 0.6406 (5)
  • 0.6417 (10)
  • 0.6457 (10)
  • 0.6496 (10)
  • 0.6535 (10)
  • 0.6563 (5)
  • 0.6575 (10)
  • 0.6614 (10)
  • 0.6654 (10)
  • 0.6693 (10)
  • 0.6732 (10)
  • 0.6772 (10)
  • 0.6811 (10)
  • 0.685 (10)
  • 0.6875 (5)
  • 0.689 (10)
  • 0.6929 (10)
  • 0.6969 (10)
  • 0.7008 (10)
  • 0.7031 (5)
  • 0.7047 (10)
  • 0.7087 (10)
  • 0.7126 (10)
  • 0.7165 (10)
  • 0.7188 (5)
  • 0.7205 (10)
  • 0.7244 (10)
  • 0.7283 (10)
  • 0.7323 (10)
  • 0.7344 (5)
  • 0.7362 (10)
  • 0.7402 (10)
  • 0.7441 (10)
  • 0.748 (10)
  • 0.75 (5)
  • 0.752 (10)
  • 0.7559 (10)
  • 0.7598 (10)
  • 0.7638 (10)
  • 0.7677 (10)
  • 0.7717 (10)
  • 0.7756 (10)
  • 0.7795 (10)
  • 0.7835 (10)
  • 0.7874 (10)
to
Reach
  • 7.0 (26)
  • 9.0 (36)
  • 12.0 (34)
  • 13.0 (10)
  • 17.0 (32)
  • 18.0 (15)
  • 20.0 (46)
  • 22.0 (32)
  • 24.0 (52)
  • 26.0 (5)
  • 28.0 (114)
  • 30.0 (16)
  • 34.0 (47)
  • 36.0 (52)
  • 38.0 (1)
  • 40.0 (23)
  • 41.0 (46)
  • 44.0 (68)
  • 47.0 (94)
  • 49.0 (26)
  • 53.0 (94)
  • 55.0 (90)
  • 56.0 (34)
  • 60.0 (86)
  • 61.0 (94)
  • 65.0 (90)
  • 67.0 (23)
  • 71.0 (90)
  • 72.0 (23)
  • 73.0 (88)
  • 77.0 (86)
  • 79.0 (86)
  • 80.0 (47)
  • 83.0 (90)
  • 93.0 (88)
  • 94.0 (45)
  • 101.0 (86)
  • 108.0 (43)
  • 121.0 (45)
  • 135.0 (44)
  • 148.0 (43)
to
Reach
  • 0.2756 (26)
  • 0.3543 (36)
  • 0.4724 (34)
  • 0.5118 (10)
  • 0.6693 (32)