successfully added to cart
View Cart

Wiertła TF • Wysoka wydajność obróbki

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • K Cast Iron (210)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (210)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (210)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (210)
  • N Non-Ferrous Materials (210)
    • N1
      Wrought Aluminum
      (184)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (210)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (210)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (184)
  • S High-Temp Alloys (197)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (197)
Applications
  • Convex Drilling Convex Drilling (258)
  • Corner Style SquareEnd Drilling Corner Style SquareEnd Drilling (258)
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (258)
  • Counterboring Counterboring (258)
  • Countersinking Countersinking (258)
  • Cross Hole Drilling Cross Hole Drilling (257)
  • Drilling Drilling (258)
  • Flat Bottom Drilling Flat Bottom Drilling (257)
  • Inclined Entry Drilling Inclined Entry Drilling (258)
  • Inclined Exit Drilling Inclined Exit Drilling (258)
  • Pre-Condition Pre-Condition (259)
  • Stacked Plates Drilling Stacked Plates Drilling (258)
  • X-Offset Drilling X-Offset Drilling (258)
Cutting Diameter
  • 2.87 (1)
  • 3.0 (1)
  • 3.1 (1)
  • 3.175 (2)
  • 3.2 (1)
  • 3.264 (2)
  • 3.3 (1)
  • 3.4 (1)
  • 3.454 (1)
  • 3.465 (1)
  • 3.5 (2)
  • 3.543 (1)
  • 3.571 (1)
  • 3.572 (1)
  • 3.6 (1)
  • 3.658 (1)
  • 3.7 (1)
  • 3.8 (1)
  • 3.815 (1)
  • 3.853 (1)
  • 3.891 (1)
  • 3.9 (1)
  • 3.969 (2)
  • 4.0 (2)
  • 4.039 (1)
  • 4.089 (1)
  • 4.1 (1)
  • 4.125 (1)
  • 4.2 (2)
  • 4.216 (1)
  • 4.3 (1)
  • 4.305 (1)
  • 4.359 (1)
  • 4.366 (2)
  • 4.394 (1)
  • 4.476 (1)
  • 4.5 (1)
  • 4.524 (1)
  • 4.6 (1)
  • 4.623 (1)
  • 4.65 (1)
  • 4.661 (1)
  • 4.7 (1)
  • 4.762 (2)
  • 4.8 (1)
  • 4.801 (1)
  • 4.851 (1)
  • 4.9 (1)
  • 4.915 (1)
  • 5.0 (2)
  • 5.085 (1)
  • 5.1 (1)
  • 5.194 (1)
  • 5.2 (1)
  • 5.4 (1)
  • 5.41 (1)
  • 5.5 (2)
  • 5.525 (1)
  • 5.55 (1)
  • 5.556 (1)
  • 5.6 (1)
  • 5.7 (1)
  • 5.789 (1)
  • 5.791 (1)
  • 5.8 (1)
  • 5.949 (1)
  • 6.0 (3)
  • 6.1 (1)
  • 6.2 (1)
  • 6.3 (1)
  • 6.35 (4)
  • 6.4 (1)
  • 6.426 (1)
  • 6.5 (2)
  • 6.528 (2)
  • 6.6 (2)
  • 6.655 (1)
  • 6.7 (1)
  • 6.747 (2)
  • 6.8 (3)
  • 6.909 (1)
  • 6.975 (1)
  • 7.0 (3)
  • 7.1 (1)
  • 7.145 (3)
  • 7.29 (1)
  • 7.313 (1)
  • 7.4 (2)
  • 7.47 (1)
  • 7.493 (1)
  • 7.5 (2)
  • 7.541 (2)
  • 7.6 (1)
  • 7.8 (1)
  • 7.938 (3)
  • 8.0 (3)
  • 8.082 (1)
  • 8.1 (1)
  • 8.2 (1)
  • 8.3 (1)
  • 8.334 (2)
  • 8.4 (1)
  • 8.5 (3)
  • 8.562 (1)
  • 8.6 (1)
  • 8.7 (1)
  • 8.731 (3)
  • 8.8 (1)
  • 8.824 (1)
  • 9.0 (3)
  • 9.058 (1)
  • 9.1 (1)
  • 9.128 (1)
  • 9.129 (1)
  • 9.3 (1)
  • 9.347 (1)
  • 9.464 (1)
  • 9.5 (2)
  • 9.525 (3)
  • 9.7 (1)
  • 9.8 (1)
  • 9.922 (2)
  • 10.0 (3)
  • 10.1 (1)
  • 10.2 (2)
  • 10.3 (1)
  • 10.31 (1)
  • 10.319 (3)
  • 10.4 (1)
  • 10.5 (3)
  • 10.7 (1)
  • 10.716 (3)
  • 10.8 (1)
  • 10.925 (1)
  • 11.0 (3)
  • 11.1 (1)
  • 11.112 (3)
  • 11.2 (2)
  • 11.5 (2)
  • 11.509 (2)
  • 11.544 (1)
  • 11.7 (1)
  • 11.8 (1)
  • 11.836 (1)
  • 11.906 (1)
  • 11.908 (1)
  • 12.0 (3)
  • 12.1 (1)
  • 12.139 (1)
  • 12.303 (3)
  • 12.362 (1)
  • 12.5 (2)
  • 12.7 (4)
  • 12.8 (1)
  • 13.0 (2)
  • 13.005 (1)
  • 13.1 (1)
  • 13.353 (1)
  • 13.5 (2)
  • 13.663 (1)
  • 13.774 (1)
  • 13.8 (1)
  • 14.0 (3)
  • 14.2 (1)
  • 14.288 (4)
  • 14.5 (1)
  • 14.592 (1)
  • 14.854 (1)
  • 15.0 (2)
  • 15.1 (1)
  • 15.5 (2)
  • 15.8 (1)
  • 15.875 (3)
  • 16.0 (1)
  • 16.5 (1)
  • 16.669 (1)
  • 16.741 (1)
  • 17.0 (1)
  • 17.462 (1)
  • 17.463 (1)
  • 17.5 (2)
  • 17.927 (1)
  • 18.0 (2)
  • 18.349 (1)
  • 18.5 (2)
  • 19.0 (1)
  • 19.05 (1)
  • 19.446 (1)
  • 19.5 (1)
  • 20.0 (1)
  • 20.5 (1)
  • 20.576 (1)
  • 21.0 (1)
to
Cutting Diameter
  • 0.113 (1)
  • 0.1181 (1)
  • 0.122 (1)
  • 0.125 (2)
  • 0.126 (1)
  • 0.1285 (2)
  • 0.1299 (1)
  • 0.1339 (1)
  • 0.136 (1)
  • 0.1364 (1)
  • 0.1378 (2)
  • 0.1395 (1)
  • 0.1406 (2)
  • 0.1417 (1)
  • 0.144 (1)
  • 0.1457 (1)
  • 0.1496 (1)
  • 0.1502 (1)
  • 0.1517 (1)
  • 0.1532 (1)
  • 0.1535 (1)
  • 0.1563 (2)
  • 0.1575 (2)
  • 0.159 (1)
  • 0.161 (1)
  • 0.1614 (1)
  • 0.1624 (1)
  • 0.1654 (2)
  • 0.166 (1)
  • 0.1693 (1)
  • 0.1695 (1)
  • 0.1716 (1)
  • 0.1719 (2)
  • 0.173 (1)
  • 0.1762 (1)
  • 0.1772 (1)
  • 0.1781 (1)
  • 0.1811 (1)
  • 0.182 (1)
  • 0.1831 (1)
  • 0.1835 (1)
  • 0.185 (1)
  • 0.1875 (2)
  • 0.189 (2)
  • 0.191 (1)
  • 0.1929 (1)
  • 0.1935 (1)
  • 0.1969 (2)
  • 0.1976 (1)
  • 0.2002 (1)
  • 0.2008 (1)
  • 0.2045 (1)
  • 0.2047 (1)
  • 0.2126 (1)
  • 0.213 (1)
  • 0.2165 (2)
  • 0.2175 (1)
  • 0.2185 (1)
  • 0.2187 (1)
  • 0.2205 (1)
  • 0.2244 (1)
  • 0.2279 (1)
  • 0.228 (1)
  • 0.2283 (1)
  • 0.2342 (1)
  • 0.2362 (3)
  • 0.2402 (1)
  • 0.2441 (1)
  • 0.248 (1)
  • 0.25 (4)
  • 0.252 (1)
  • 0.253 (1)
  • 0.2559 (2)
  • 0.257 (2)
  • 0.2598 (2)
  • 0.262 (1)
  • 0.2638 (1)
  • 0.2656 (2)
  • 0.2677 (3)
  • 0.272 (1)
  • 0.2746 (1)
  • 0.2756 (3)
  • 0.2795 (1)
  • 0.2813 (3)
  • 0.287 (1)
  • 0.2879 (1)
  • 0.2913 (2)
  • 0.2941 (1)
  • 0.295 (1)
  • 0.2953 (2)
  • 0.2969 (2)
  • 0.2992 (1)
  • 0.3071 (1)
  • 0.3125 (3)
  • 0.315 (3)
  • 0.3182 (1)
  • 0.3189 (1)
  • 0.3228 (1)
  • 0.3268 (1)
  • 0.3281 (2)
  • 0.3307 (1)
  • 0.3346 (3)
  • 0.3371 (1)
  • 0.3386 (1)
  • 0.3425 (1)
  • 0.3437 (3)
  • 0.3465 (1)
  • 0.3474 (1)
  • 0.3543 (3)
  • 0.3566 (1)
  • 0.3583 (1)
  • 0.3594 (2)
  • 0.3661 (1)
  • 0.368 (1)
  • 0.3726 (1)
  • 0.374 (2)
  • 0.375 (3)
  • 0.3819 (1)
  • 0.3858 (1)
  • 0.3906 (2)
  • 0.3937 (3)
  • 0.3976 (1)
  • 0.4016 (2)
  • 0.4055 (1)
  • 0.4059 (1)
  • 0.4063 (3)
  • 0.4094 (1)
  • 0.4134 (3)
  • 0.4213 (1)
  • 0.4219 (3)
  • 0.4252 (1)
  • 0.4301 (1)
  • 0.4331 (3)
  • 0.437 (1)
  • 0.4375 (3)
  • 0.4409 (2)
  • 0.4528 (2)
  • 0.4531 (2)
  • 0.4545 (1)
  • 0.4606 (1)
  • 0.4646 (1)
  • 0.466 (1)
  • 0.4687 (1)
  • 0.4688 (1)
  • 0.4724 (3)
  • 0.4764 (1)
  • 0.4779 (1)
  • 0.4844 (3)
  • 0.4867 (1)
  • 0.4921 (2)
  • 0.5 (4)
  • 0.5039 (1)
  • 0.5118 (2)
  • 0.512 (1)
  • 0.5157 (1)
  • 0.5257 (1)
  • 0.5315 (2)
  • 0.5379 (1)
  • 0.5423 (1)
  • 0.5433 (1)
  • 0.5512 (3)
  • 0.5591 (1)
  • 0.5625 (3)
  • 0.5709 (1)
  • 0.5745 (1)
  • 0.5848 (1)
  • 0.5906 (2)
  • 0.5945 (1)
  • 0.6102 (2)
  • 0.622 (1)
  • 0.625 (3)
  • 0.6299 (1)
  • 0.6496 (1)
  • 0.6563 (1)
  • 0.6591 (1)
  • 0.6693 (1)
  • 0.6875 (2)
  • 0.689 (2)
  • 0.7058 (1)
  • 0.7087 (2)
  • 0.7224 (1)
  • 0.7283 (2)
  • 0.748 (1)
  • 0.75 (1)
  • 0.7656 (1)
  • 0.7677 (1)
  • 0.7874 (1)
  • 0.8071 (1)
  • 0.8101 (1)
  • 0.8268 (1)
to
Reach
  • 27.0 (16)
  • 28.0 (9)
  • 35.0 (15)
  • 36.0 (12)
  • 43.0 (15)
  • 44.0 (16)
  • 50.0 (20)
  • 53.0 (26)
  • 60.0 (16)
  • 61.0 (22)
  • 66.0 (13)
  • 70.0 (14)
  • 71.0 (23)
  • 76.0 (7)
  • 77.0 (14)
  • 82.0 (5)
  • 83.0 (9)
  • 92.0 (4)
  • 93.0 (6)
  • 95.0 (3)
  • 100.0 (2)
  • 101.0 (5)
  • 112.0 (2)
to
Reach
  • 1.063 (16)
  • 1.1024 (9)
  • 1.378 (15)
  • 1.4173 (12)
  • 1.6929 (15)
  • 1.7323 (16)
  • 1.9685 (20)
  • 2.0866 (25)
  • 2.09 (1)
  • 2.3622 (16)
  • 2.4016 (22)
  • 2.5984 (13)
  • 2.7559 (14)
  • 2.7953 (23)
  • 2.9921 (7)
  • 3.0315 (14)
  • 3.2283 (5)
  • 3.2677 (9)
  • 3.622 (4)
  • 3.6614 (6)
  • 3.7402 (3)
  • 3.937 (2)
  • 3.9764 (5)
  • 4.4094 (2)
to
Internal Coolant Capability
application
Coating
  • TiAlN (61)
  • Uncoated (213)
Grade Of Cutting Tool
  • K10 (185)
  • K715 (28)
  • KC7210 (61)
Hand Of Tool
  • R (274)
Drill Type
  • 81-01 (274)
frontEnd
Point Angle
  • 130.0 (274)
to
backEnd
Connection Type
  • CYLINDRICAL (259)
Back-End Diameter
  • 0.1875 (31)
  • 0.2362 (37)
  • 0.25 (15)
  • 0.3125 (20)
  • 0.315 (26)
  • 0.375 (16)
  • 0.3937 (22)
  • 0.4375 (13)
  • 0.4724 (23)
  • 0.5 (14)
  • 0.5512 (14)
  • 0.5625 (7)
  • 0.625 (5)
  • 0.6299 (9)
  • 0.6875 (4)
  • 0.7087 (6)
  • 0.75 (3)
  • 0.7874 (7)
  • 0.8125 (2)
to
Back-End Diameter
  • 4.763 (31)
  • 6.0 (37)
  • 6.35 (15)
  • 7.938 (20)
  • 8.0 (26)
  • 9.525 (16)
  • 10.0 (22)
  • 11.113 (13)
  • 12.0 (23)
  • 12.7 (14)
  • 14.0 (14)
  • 14.288 (7)
  • 15.875 (5)
  • 16.0 (9)
  • 17.463 (4)
  • 18.0 (6)
  • 19.05 (3)
  • 20.0 (7)
  • 20.638 (2)
to
other
Grade
  • K10 (185)
  • K715 (28)
  • KC7210 (61)
Platform
  • TF Drills (187)
Tool Unit
  • I (131)
  • M (143)
Over All Length [L]
  • 66.0 (25)
  • 74.0 (27)
  • 82.0 (28)
  • 91.0 (37)
  • 94.0 (1)
  • 95.0 (1)
  • 103.0 (32)
  • 105.0 (3)
  • 110.0 (6)
  • 111.0 (10)
  • 118.0 (32)
  • 122.0 (4)
  • 124.0 (19)
  • 125.0 (2)
  • 133.0 (16)
  • 141.0 (3)
  • 143.0 (12)
  • 148.0 (3)
  • 152.4 (1)
  • 153.0 (7)
  • 155.0 (2)
  • 167.0 (2)
  • 171.0 (1)
to
Over All Length [L]
  • 2.5984 (25)
  • 2.9134 (27)
  • 3.2283 (29)
  • 3.58 (1)
  • 3.5827 (36)
  • 3.7008 (1)
  • 3.7402 (1)
  • 4.0551 (32)
  • 4.1339 (3)
  • 4.3307 (6)
  • 4.3701 (10)
  • 4.6457 (32)
  • 4.8031 (4)
  • 4.8819 (19)
  • 4.9213 (2)
  • 5.2362 (16)
  • 5.5512 (3)
  • 5.6299 (12)
  • 5.8268 (3)
  • 6.0236 (7)
  • 6.1024 (2)
  • 6.5748 (2)
  • 6.7323 (1)
to
No filters matching ""
View Products in
Metric
Inch
Wiertła monolityczne z węglika spiekanego

Wiertła TF • Wysoka wydajność obróbki • Bez chłodziwa
(129 Products)
  • DrillingDrilling
  • Drilling: Inclined ExitDrilling: Inclined Exit
  • Drilling Depth: 5xDrilling Depth: 5x
  • Shank - Cylindrical  Plain ≤h6Shank - Cylindrical Plain ≤h6
  • Helix Angle: 30°Helix Angle: 30°
  • Flood Coolant: DrillingFlood Coolant: Drilling
  • DIN number 6535DIN number 6535
  • DIN number 6537DIN number 6537
  • Tool Dimensions: 3flute/3margin/no coolTool Dimensions: 3flute/3margin/no cool
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D1] Drill Diameter M [D1] Drill Diameter M [L] Overall Length [L] Overall Length [L3] Flute Length [L3] Flute Length [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth [L5] Drill Point Length [L5] Drill Point Length [LS] Shank Length [LS] Shank Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter
1191414 B105A03000 B105A03000 K10 3.0000 .1181 66.0000 2.598 28.0000 1.102 23.0000 .9055 0.7490 .0295 36.0 1.417 6.0 .2362
    1191415 B105A03100 B105A03100 K10 3.1000 .1220 66.0000 2.598 28.0000 1.102 23.0000 .9055 0.7740 .0305 36.0 1.417 6.0 .2362
      1191416 B105A03200 B105A03200 K10 3.2000 .1260 66.0000 2.598 28.0000 1.102 23.0000 .9055 0.7990 .0315 36.0 1.417 6.0 .2362
        1191417 B105A03300 B105A03300 K10 3.3000 .1299 66.0000 2.598 28.0000 1.102 23.0000 .9055 0.8240 .0325 36.0 1.417 6.0 .2362
          1201617 B105A03400 B105A03400 K10 3.4000 .1339 66.0000 2.598 28.0000 1.102 23.0000 .9055 0.8490 .0334 36.0 1.417 6.0 .2362
            1198992 B105A03500 B105A03500 KC7210 3.5000 .1378 66.0000 2.598 28.0000 1.102 23.0000 .9055 0.8740 .0344 36.0 1.417 6.0 .2362
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              Wiertła monolityczne z węglika spiekanego

              Wiertła TF • Materiały tytanowe • Wewnętrzne doprowadzanie chłodziwa
              (15 Products)
              • DrillingDrilling
              • Drilling: Inclined ExitDrilling: Inclined Exit
              • Shank - Cylindrical  Plain ≤h6Shank - Cylindrical Plain ≤h6
              • Helix Angle: 30°Helix Angle: 30°
              • Drilling - Through CoolantDrilling - Through Coolant
              • Tool Dimensions: 3flute/3margin/coolantTool Dimensions: 3flute/3margin/coolant
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D1] Drill Diameter M [D1] Drill Diameter M [L] Overall Length [L] Overall Length [L3] Flute Length [L3] Flute Length [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth [L5] Drill Point Length [L5] Drill Point Length [LS] Shank Length [LS] Shank Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter
              1762669 B125A06000 B125A06000 K715 6.0000 .2362 94.0000 3.700 44.0000 1.732 35.0000 1.378 1.6100 .0634 48.0 1.889 6.0 .2362