Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Precyzyjna obróbka wykańczająca otworów

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (561)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (561)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (561)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (561)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (561)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (561)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (561)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (561)
  • M Stainless Steel (459)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (459)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (459)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (459)
  • K Cast Iron (537)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (537)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (537)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (537)
  • N Non-Ferrous Materials (228)
    • N1
      Wrought Aluminum
      (228)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (228)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (228)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (204)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (159)
    • N6
      Carbon, Graphite Composites, CFRP
      (159)
    • N7
      MMC's
      (159)
  • S High-Temp Alloys (450)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (450)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (450)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (450)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (450)
  • H Hardened Materials (157)
    • H1
      Hardened Materials 44-48 HRC
      (157)
    • H2
      Hardened Materials 48-55 HRC
      (157)
    • H3
      Hardened Materials 56-60 HRC
      (157)
    • H4
      Hardened Materials >60 HRC
      (157)
Applications
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (528)
  • Blind Hole Finishing Blind Hole Finishing (565)
  • Chamfer Milling Chamfer Milling (5)
  • Countersinking Countersinking (5)
  • Drilling Drilling (5)
  • Face Milling Face Milling (5)
  • Flat Bottom Drilling Flat Bottom Drilling (5)
  • Grooving Grooving (1)
  • ID Thread Turning ID Thread Turning (91)
  • Multiple Direction Cutting Multiple Direction Cutting (12)
  • Pipe Thread Pipe Thread (5)
  • Pocket Pocket (5)
  • Pocket Helical Pocket Helical (5)
  • Pocket Milling Pocket Milling (5)
  • Pocket Plunge Milling Pocket Plunge Milling (5)
  • Pre-Condition Pre-Condition (385)
  • Profile Milling Profile Milling (5)
  • Ramping Ramping (5)
  • Shoulder Ball Nose Shoulder Ball Nose (5)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (5)
  • Shoulder Milling Shoulder Milling (5)
  • Shoulder Roughing Shoulder Roughing (5)
  • Shoulder Square End Shoulder Square End (5)
  • Slot Ball Nose Slot Ball Nose (5)
  • Slot Milling Slot Milling (5)
  • Slot Side Slot Side (5)
  • Slot Square End Slot Square End (5)
  • Slot T Slot T (5)
  • Thread Milling Thread Milling (5)
  • Threading Threading (5)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (456)
  • Through Hole Finishing Through Hole Finishing (488)
Cutting Diameter
  • 5.0 (4)
  • 5.5 (4)
  • 6.0 (6)
  • 6.35 (2)
  • 6.5 (4)
  • 7.0 (4)
  • 7.9375 (2)
  • 8.0 (6)
  • 9.0 (4)
  • 9.525 (2)
  • 10.0 (6)
  • 11.0 (4)
  • 11.1125 (2)
  • 12.0 (6)
  • 12.7 (2)
  • 13.0 (4)
  • 14.0 (17)
  • 14.288 (7)
  • 15.0 (11)
  • 15.875 (5)
  • 15.88 (1)
  • 16.0 (12)
  • 17.0 (11)
  • 17.463 (7)
  • 18.0 (13)
  • 18.87 (4)
  • 19.0 (11)
  • 19.05 (9)
  • 20.0 (13)
  • 20.64 (3)
  • 20.998 (1)
  • 21.0 (8)
  • 21.998 (1)
  • 22.0 (9)
  • 22.225 (4)
  • 22.23 (3)
  • 22.24 (1)
  • 22.5 (3)
  • 23.0 (9)
  • 23.81 (3)
  • 23.813 (4)
  • 24.0 (9)
  • 25.0 (9)
  • 25.4 (8)
  • 26.0 (9)
  • 26.99 (2)
  • 27.0 (9)
  • 27.5 (3)
  • 28.0 (10)
  • 28.575 (1)
  • 28.58 (3)
  • 29.0 (5)
  • 30.0 (10)
  • 30.16 (3)
  • 31.0 (5)
  • 31.75 (8)
  • 32.0 (10)
  • 32.5 (3)
  • 33.0 (5)
  • 33.34 (3)
  • 34.0 (9)
  • 34.93 (3)
  • 35.0 (5)
  • 36.0 (10)
  • 36.51 (3)
  • 36.52 (1)
  • 37.0 (5)
  • 37.5 (3)
  • 38.0 (9)
  • 38.1 (2)
  • 39.0 (5)
  • 39.6875 (1)
  • 39.69 (3)
  • 39.991 (1)
  • 40.0 (9)
  • 41.0 (5)
  • 41.28 (3)
  • 41.961 (1)
  • 42.0 (10)
to
Cutting Diameter
  • 0.1969 (4)
  • 0.2165 (4)
  • 0.2362 (6)
  • 0.25 (2)
  • 0.2559 (4)
  • 0.2756 (4)
  • 0.3125 (2)
  • 0.315 (6)
  • 0.3543 (4)
  • 0.375 (2)
  • 0.3937 (6)
  • 0.4331 (4)
  • 0.4375 (2)
  • 0.4724 (6)
  • 0.5 (2)
  • 0.5118 (4)
  • 0.551 (7)
  • 0.5512 (10)
  • 0.5625 (7)
  • 0.5906 (4)
  • 0.591 (7)
  • 0.625 (6)
  • 0.6299 (10)
  • 0.63 (2)
  • 0.669 (3)
  • 0.6693 (8)
  • 0.6875 (7)
  • 0.7087 (6)
  • 0.709 (7)
  • 0.743 (4)
  • 0.748 (11)
  • 0.75 (9)
  • 0.7874 (13)
  • 0.8126 (3)
  • 0.8268 (8)
  • 0.827 (1)
  • 0.866 (1)
  • 0.8661 (9)
  • 0.875 (5)
  • 0.8752 (3)
  • 0.8858 (3)
  • 0.9055 (9)
  • 0.9374 (3)
  • 0.9375 (4)
  • 0.9449 (9)
  • 0.9843 (9)
  • 1.0 (8)
  • 1.0236 (9)
  • 1.0626 (2)
  • 1.063 (9)
  • 1.0827 (3)
  • 1.1024 (10)
  • 1.125 (1)
  • 1.1252 (3)
  • 1.1417 (5)
  • 1.1811 (10)
  • 1.1874 (3)
  • 1.2205 (5)
  • 1.25 (8)
  • 1.2598 (10)
  • 1.2795 (3)
  • 1.2992 (5)
  • 1.3126 (3)
  • 1.3385 (4)
  • 1.3386 (5)
  • 1.3752 (3)
  • 1.378 (5)
  • 1.4173 (10)
  • 1.4374 (3)
  • 1.4375 (1)
  • 1.4567 (5)
  • 1.4764 (3)
  • 1.4961 (9)
  • 1.5 (2)
  • 1.5354 (5)
  • 1.5625 (1)
  • 1.5626 (3)
  • 1.574 (1)
  • 1.5748 (9)
  • 1.6142 (5)
  • 1.625 (1)
  • 1.6252 (3)
  • 1.6535 (10)
to
Cutting Condition
  • Heavily Interrupted Cut (94)
  • Lightly Interrupted Cut (96)
  • Smooth Cut (96)
  • Varying Depth of Cut (96)
Reach
  • 24.58 (1)
  • 25.63 (1)
  • 26.55 (1)
  • 49.99 (1)
  • 51.95 (1)
to
Reach
  • 0.968 (1)
  • 1.009 (1)
  • 1.045 (1)
  • 1.968 (1)
  • 2.045 (1)
to
Tool Cutting Edge Angle
  • 90.0 (70)
  • 91.0 (8)
  • 92.0 (23)
  • 93.0 (1)
  • 95.0 (4)
to
Connection Style
  • E-BORE Boring Bar (21)
  • Short Taper Reamer Shank (334)
  • Straight-Cylindrical (92)
  • Whistle Notch 2 (3)
  • Whistle Notch 2 Front (12)
Number of Flutes
  • 2 (4)
  • 4 (50)
  • 6 (208)
  • 8 (168)
Cutting Edges Per Insert
  • 1.0 (35)
  • 2.0 (46)
  • 4.0 (99)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.038 (38)
  • 0.05 (2)
  • 0.051 (2)
  • 0.1 (157)
  • 0.102 (10)
  • 0.178 (2)
  • 0.18 (2)
  • 0.2 (158)
  • 0.203 (149)
  • 0.38 (2)
  • 0.381 (2)
  • 0.396 (10)
  • 0.397 (149)
  • 0.4 (161)
  • 0.5 (2)
  • 0.794 (22)
  • 0.8 (157)
  • 1.2 (11)
  • 1.6 (3)
to
Corner Radius
  • 0.0015 (38)
  • 0.002 (2)
  • 0.004 (157)
  • 0.007 (2)
  • 0.0079 (1)
  • 0.008 (157)
  • 0.015 (2)
  • 0.0156 (158)
  • 0.0158 (37)
  • 0.016 (10)
  • 0.0169 (1)
  • 0.0197 (2)
  • 0.0312 (22)
  • 0.0313 (157)
  • 0.0315 (40)
  • 0.0469 (11)
  • 0.047 (8)
  • 0.0625 (3)
  • 0.312 (10)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • HCK10 (40)
  • HK1500 (32)
  • HK35 (37)
  • HT2 (46)
  • HTX (46)
  • HWK15 (40)
  • K00379 (2)
  • K10M (43)
  • K10P (43)
  • K10U (38)
  • K15U (38)
  • K20K (43)
  • K25M (35)
  • K313 (159)
  • K420 (2)
  • K605 (24)
  • K68 (157)
  • KB1345 (21)
  • KB1610 (151)
  • KB1630 (55)
  • KB5610 (149)
  • KB5625 (48)
  • KB5630 (47)
  • KB9610 (48)
  • KBH10 (38)
  • KBH20 (56)
  • KBHK10 (5)
  • KBHK15 (5)
  • KC250 (111)
  • KC5010 (159)
  • KC5025 (159)
  • KC5410 (157)
  • KC6005 (82)
  • KC6105 (25)
  • KC6305 (151)
  • KC710 (112)
  • KC720 (157)
  • KC730 (159)
  • KC7310 (110)
  • KC732 (157)
  • KC8050 (157)
  • KC810 (157)
  • KC850 (157)
  • KC9010 (149)
  • KC9025 (157)
  • KC910 (157)
  • KC9105 (157)
  • KC9110 (157)
  • KC9120 (149)
  • KC9125 (157)
  • KC9225 (157)
  • KC9240 (157)
  • KC9240NEW (157)
  • KC9315 (157)
  • KC9320 (157)
  • KC9325 (157)
  • KC935 (159)
  • KC950 (149)
  • KC990 (149)
  • KCD25 (157)
  • KCK05 (157)
  • KCK05B (38)
  • KCK15 (157)
  • KCK15B (157)
  • KCK20 (157)
  • KCK20B (157)
  • KCM15 (157)
  • KCM15B (156)
  • KCM25 (157)
  • KCM25B (157)
  • KCM35 (46)
  • KCM35B (4)
  • KCP05 (157)
  • KCP05B (3)
  • KCP10 (157)
  • KCP10B (157)
  • KCP25 (157)
  • KCP25B (157)
  • KCP30 (156)
  • KCP30B (11)
  • KCPK05 (110)
  • KCS10 (157)
  • KCS10B (157)
  • KCU05 (72)
  • KCU10 (159)
  • KCU25 (159)
  • KCU45 (7)
  • KD050 (148)
  • KD081 (40)
  • KD100 (112)
  • KD105 (110)
  • KD120 (110)
  • KD1400 (151)
  • KD1405 (110)
  • KD1415 (49)
  • KD1425 (151)
  • KT125 (111)
  • KT150 (111)
  • KT175 (148)
  • KT315 (159)
  • KT325 (97)
  • KT6215 (51)
  • KT6225 (2)
  • KT6315 (2)
  • KTP10 (149)
  • KU10 (149)
  • KU10T (157)
  • KU30T (157)
  • NL300 (8)
  • NL920 (8)
  • PB100 (29)
  • PB170 (37)
  • PB250 (37)
  • PB300 (29)
  • PD100 (40)
  • PD50 (37)
  • SP0PW3 (8)
  • SP4019 (8)
  • SPM5F2 (2)
  • SPMQMA (10)
  • SPN3W1 (3)
  • THM (40)
  • THM-X (40)
  • TN1000 (29)
  • TN10P (40)
  • TN10U (40)
  • TN15M (40)
  • TN15U (32)
  • TN2000 (40)
  • TN20K (40)
  • TN20P (40)
  • TN30M (40)
  • TN4000 (32)
  • TN5015 (40)
  • TN5020 (40)
  • TN5105 (40)
  • TN5120 (40)
  • TN6010 (11)
  • TN6025 (3)
  • TN7005 (3)
  • TN7010 (40)
  • TN7015 (40)
  • TN7025 (40)
  • TN7035 (40)
  • TN7105 (40)
  • TN7110 (40)
  • TN7115 (40)
  • TN7125 (40)
  • TN7135 (40)
  • TN8025 (40)
  • TTI15 (32)
  • TTM (3)
  • TTR (40)
  • TTS (32)
  • TTX (3)
  • W00342 (8)
  • WBH10C (32)
  • WBH10P (32)
  • WBH10U (32)
  • WBH25P (32)
  • WBH30P (3)
  • WBK45U (11)
  • WDN00U (32)
  • WDN25U (32)
  • WK05CT (40)
  • WK15CT (40)
  • WK20CT (40)
  • WM15CT (40)
  • WM25CT (40)
  • WP15CT (40)
  • WP20TT (29)
  • WP25CT (40)
  • WP35CT (11)
  • WS10PT (40)
  • WS25PT (32)
  • WU10HT (40)
  • WU20HT (29)
  • YY3A00 (1)
Hand Of Tool
  • R (468)
Wiper Insert
  • N (121)
Helix Hand
  • L (165)
  • N (163)
  • R (102)
Lead In Length
  • 0.0079 (45)
  • 0.01 (6)
  • 0.0197 (36)
  • 0.02 (76)
  • 0.03 (6)
  • 0.04 (10)
  • 0.043 (207)
  • 0.0433 (36)
  • 0.05 (8)
to
Lead in Length
  • 0.2 (45)
  • 0.3 (6)
  • 0.4 (10)
  • 0.5 (102)
  • 0.75 (6)
  • 0.95 (10)
  • 1.1 (243)
  • 1.15 (8)
to
Minimum Axial Groove Diameter
  • 0.08 (1)
  • 0.1575 (1)
  • 0.2362 (3)
  • 0.2363 (1)
  • 0.315 (2)
  • 0.3346 (1)
  • 0.335 (1)
  • 0.3937 (4)
  • 0.4331 (2)
  • 0.4724 (3)
  • 0.5315 (2)
  • 0.5511 (2)
  • 0.5512 (2)
  • 0.5906 (1)
  • 0.6299 (4)
  • 0.748 (1)
  • 0.7677 (1)
  • 0.7874 (1)
  • 0.8661 (1)
  • 0.8858 (1)
  • 0.9646 (1)
  • 0.9843 (3)
  • 1.0039 (2)
  • 1.1417 (2)
  • 1.1614 (2)
  • 1.3189 (1)
  • 1.3386 (2)
  • 1.4173 (2)
  • 1.5748 (1)
  • 1.5945 (1)
  • 1.6535 (1)
  • 1.6929 (2)
  • 1.791 (1)
  • 1.8504 (1)
  • 1.9291 (1)
  • 1.9685 (1)
  • 2.0472 (2)
  • 2.0866 (1)
  • 2.087 (1)
  • 2.2244 (1)
  • 2.3622 (2)
  • 2.4016 (1)
  • 2.5591 (2)
  • 2.6772 (1)
  • 2.9921 (1)
  • 3.2283 (1)
  • 3.82 (1)
  • 3.937 (2)
  • 4.0748 (1)
  • 4.3307 (1)
  • 4.9213 (1)
  • 5.43 (1)
  • 5.4331 (2)
  • 5.9055 (1)
  • 7.874 (2)
to
Minimum Axial Groove Diameter
  • 2.0 (1)
  • 4.0 (1)
  • 6.0 (4)
  • 8.0 (2)
  • 8.5 (2)
  • 10.0 (4)
  • 11.0 (2)
  • 12.0 (3)
  • 13.5 (2)
  • 14.0 (4)
  • 15.0 (1)
  • 16.0 (4)
  • 19.0 (1)
  • 19.5 (1)
  • 20.0 (1)
  • 22.0 (1)
  • 22.5 (1)
  • 24.5 (1)
  • 25.0 (3)
  • 25.5 (2)
  • 29.0 (2)
  • 29.5 (2)
  • 33.5 (1)
  • 34.0 (2)
  • 36.0 (2)
  • 40.0 (1)
  • 40.5 (1)
  • 42.0 (1)
  • 43.0 (2)
  • 45.5 (1)
  • 47.0 (1)
  • 49.0 (1)
  • 50.0 (1)
  • 52.0 (2)
  • 53.0 (2)
  • 56.5 (1)
  • 60.0 (2)
  • 61.0 (1)
  • 65.0 (2)
  • 68.0 (1)
  • 76.0 (1)
  • 82.0 (1)
  • 97.0 (1)
  • 100.0 (2)
  • 103.5 (1)
  • 110.0 (1)
  • 125.0 (1)
  • 138.0 (3)
  • 150.0 (1)
  • 200.0 (2)
to
Maximum Axial Groove Diameter
  • 7.0 (1)
  • 8.0 (2)
  • 9.0 (1)
  • 9.5 (1)
  • 10.0 (2)
  • 11.5 (1)
  • 12.0 (5)
  • 14.0 (4)
  • 14.5 (1)
  • 16.0 (4)
  • 16.5 (1)
  • 17.0 (1)
  • 19.5 (1)
  • 20.0 (4)
  • 22.5 (1)
  • 23.0 (1)
  • 25.0 (1)
  • 25.5 (1)
  • 26.0 (1)
  • 30.0 (2)
  • 33.5 (1)
  • 37.0 (2)
  • 41.0 (1)
  • 43.5 (1)
  • 44.0 (1)
  • 53.0 (1)
  • 54.0 (1)
  • 58.0 (1)
  • 65.0 (1)
  • 66.0 (2)
  • 77.0 (1)
  • 83.0 (1)
  • 100.0 (1)
  • 102.0 (1)
  • 103.0 (1)
  • 130.0 (1)
  • 152.0 (1)
  • 205.0 (3)
  • 1020.0 (2)
to
Maximum Axial Groove Diameter
  • 0.2756 (1)
  • 0.315 (2)
  • 0.3543 (1)
  • 0.374 (1)
  • 0.3937 (2)
  • 0.4528 (1)
  • 0.472 (2)
  • 0.4724 (3)
  • 0.5511 (2)
  • 0.5512 (2)
  • 0.5709 (1)
  • 0.6299 (4)
  • 0.6496 (1)
  • 0.6693 (1)
  • 0.7677 (1)
  • 0.7874 (4)
  • 0.8743 (1)
  • 0.8858 (1)
  • 0.9055 (1)
  • 1.0039 (1)
  • 1.0236 (1)
  • 1.1811 (2)
  • 1.3189 (1)
  • 1.4567 (2)
  • 1.6142 (1)
  • 1.7126 (1)
  • 1.7323 (1)
  • 2.0866 (1)
  • 2.126 (1)
  • 2.28 (1)
  • 2.5591 (1)
  • 2.5984 (2)
  • 3.0315 (1)
  • 3.2677 (1)
  • 3.937 (1)
  • 4.0157 (1)
  • 4.0551 (1)
  • 5.1181 (1)
  • 5.9843 (1)
  • 8.0709 (2)
  • 8.071 (1)
  • 40.1575 (2)
to
Cutting Direction
  • B (2)
  • E (31)
Rake Angle Style
  • NEGATIVE-ZERO (21)
  • NEUTRAL (ZERO) (11)
Maximum Bore Depth
  • 14.27 (1)