successfully added to cart
View Cart

Wytaczanie obrotowe

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (159)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (159)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (159)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (159)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (159)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (159)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (159)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (159)
  • M Stainless Steel (159)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (159)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (159)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (159)
  • K Cast Iron (159)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (159)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (159)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (159)
  • N Non-Ferrous Materials (159)
    • N1
      Wrought Aluminum
      (159)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (159)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (159)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (159)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (159)
    • N6
      Carbon, Graphite Composites, CFRP
      (159)
    • N7
      MMC's
      (159)
  • S High-Temp Alloys (159)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (159)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (159)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (159)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (159)
  • H Hardened Materials (157)
    • H1
      Hardened Materials 44-48 HRC
      (157)
    • H2
      Hardened Materials 48-55 HRC
      (157)
    • H3
      Hardened Materials 56-60 HRC
      (157)
    • H4
      Hardened Materials >60 HRC
      (157)
Applications
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (144)
  • Blind Hole Finishing Blind Hole Finishing (144)
  • Multiple Direction Cutting Multiple Direction Cutting (12)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (144)
  • Through Hole Finishing Through Hole Finishing (144)
Cutting Condition
  • Heavily Interrupted Cut (94)
  • Lightly Interrupted Cut (96)
  • Smooth Cut (96)
  • Varying Depth of Cut (96)
Tool Cutting Edge Angle
  • 90.0 (65)
  • 91.0 (8)
  • 92.0 (23)
  • 93.0 (1)
  • 95.0 (4)
to
Cutting Edges Per Insert
  • 1.0 (28)
  • 2.0 (28)
  • 4.0 (26)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.038 (38)
  • 0.05 (2)
  • 0.051 (2)
  • 0.1 (157)
  • 0.102 (10)
  • 0.178 (2)
  • 0.18 (2)
  • 0.2 (157)
  • 0.203 (149)
  • 0.38 (2)
  • 0.381 (2)
  • 0.396 (10)
  • 0.397 (149)
  • 0.4 (157)
  • 0.794 (22)
  • 0.8 (157)
  • 1.2 (11)
  • 1.6 (3)
to
Corner Radius
  • 0.0015 (38)
  • 0.002 (2)
  • 0.004 (157)
  • 0.007 (2)
  • 0.008 (157)
  • 0.015 (2)
  • 0.0156 (157)
  • 0.0158 (37)
  • 0.016 (8)
  • 0.0312 (22)
  • 0.0313 (157)
  • 0.0315 (40)
  • 0.0469 (11)
  • 0.047 (8)
  • 0.0625 (3)
  • 0.312 (10)
to
application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • HCK10 (40)
  • HK1500 (32)
  • HK35 (37)
  • HT2 (46)
  • HTX (46)
  • HWK15 (40)
  • K00379 (2)
  • K10M (43)
  • K10P (43)
  • K10U (38)
  • K15U (38)
  • K20K (43)
  • K25M (35)
  • K313 (159)
  • K420 (2)
  • K68 (157)
  • KB1345 (21)
  • KB1610 (149)
  • KB1630 (55)
  • KB5610 (149)
  • KB5625 (48)
  • KB5630 (47)
  • KB9610 (48)
  • KBH10 (38)
  • KBH20 (56)
  • KC250 (111)
  • KC5010 (159)
  • KC5025 (159)
  • KC5410 (157)
  • KC710 (112)
  • KC720 (157)
  • KC730 (159)
  • KC7310 (110)
  • KC732 (157)
  • KC8050 (157)
  • KC810 (157)
  • KC850 (157)
  • KC9010 (149)
  • KC9025 (157)
  • KC910 (157)
  • KC9105 (157)
  • KC9110 (157)
  • KC9120 (149)
  • KC9125 (157)
  • KC9225 (157)
  • KC9240 (157)
  • KC9240NEW (157)
  • KC9315 (157)
  • KC9320 (157)
  • KC9325 (157)
  • KC935 (159)
  • KC950 (149)
  • KC990 (149)
  • KCD25 (157)
  • KCK05 (157)
  • KCK05B (38)
  • KCK15 (157)
  • KCK15B (157)
  • KCK20 (157)
  • KCK20B (157)
  • KCM15 (157)
  • KCM15B (156)
  • KCM25 (157)
  • KCM25B (157)
  • KCM35 (46)
  • KCM35B (4)
  • KCP05 (157)
  • KCP05B (3)
  • KCP10 (157)
  • KCP10B (157)
  • KCP25 (157)
  • KCP25B (157)
  • KCP30 (156)
  • KCP30B (11)
  • KCPK05 (110)
  • KCS10 (157)
  • KCS10B (157)
  • KCU10 (159)
  • KCU25 (159)
  • KD050 (148)
  • KD081 (40)
  • KD100 (112)
  • KD105 (110)
  • KD120 (110)
  • KD1400 (151)
  • KD1405 (110)
  • KD1425 (151)
  • KT125 (111)
  • KT150 (111)
  • KT175 (148)
  • KT315 (159)
  • KT325 (46)
  • KTP10 (149)
  • KU10 (149)
  • KU10T (157)
  • KU30T (157)
  • NL300 (8)
  • NL920 (8)
  • PB100 (29)
  • PB170 (37)
  • PB250 (37)
  • PB300 (29)
  • PD100 (40)
  • PD50 (37)
  • SP0PW3 (8)
  • SP4019 (8)
  • SPM5F2 (2)
  • SPMQMA (10)
  • SPN3W1 (3)
  • THM (40)
  • THM-X (40)
  • TN1000 (29)
  • TN10P (40)
  • TN10U (40)
  • TN15M (40)
  • TN15U (32)
  • TN2000 (40)
  • TN20K (40)
  • TN20P (40)
  • TN30M (40)
  • TN4000 (32)
  • TN5015 (40)
  • TN5020 (40)
  • TN5105 (40)
  • TN5120 (40)
  • TN6010 (11)
  • TN6025 (3)
  • TN7005 (3)
  • TN7010 (40)
  • TN7015 (40)
  • TN7025 (40)
  • TN7035 (40)
  • TN7105 (40)
  • TN7110 (40)
  • TN7115 (40)
  • TN7125 (40)
  • TN7135 (40)
  • TN8025 (40)
  • TTI15 (32)
  • TTM (3)
  • TTR (40)
  • TTS (32)
  • TTX (3)
  • W00342 (8)
  • WBH10C (32)
  • WBH10P (32)
  • WBH10U (32)
  • WBH25P (32)
  • WBH30P (3)
  • WBK45U (11)
  • WDN00U (32)
  • WDN25U (32)
  • WK05CT (40)
  • WK15CT (40)
  • WK20CT (40)
  • WM15CT (40)
  • WM25CT (40)
  • WP15CT (40)
  • WP20TT (29)
  • WP25CT (40)
  • WP35CT (11)
  • WS10PT (40)
  • WS25PT (32)
  • WU20HT (29)
  • YY3A00 (1)
Wiper Insert
  • N (28)
Minimum Axial Groove Diameter
  • 0.08 (1)
  • 0.1575 (1)
  • 0.2362 (3)
  • 0.2363 (1)
  • 0.315 (2)
  • 0.3346 (1)
  • 0.335 (1)
  • 0.3937 (4)
  • 0.4331 (2)
  • 0.4724 (3)
  • 0.5315 (2)
  • 0.5511 (2)
  • 0.5512 (2)
  • 0.5906 (1)
  • 0.6299 (4)
  • 0.748 (1)
  • 0.7677 (1)
  • 0.7874 (1)
  • 0.8661 (1)
  • 0.8858 (1)
  • 0.9646 (1)
  • 0.9843 (3)
  • 1.0039 (2)
  • 1.1417 (2)
  • 1.1614 (2)
  • 1.3189 (1)
  • 1.3386 (2)
  • 1.4173 (2)
  • 1.5748 (1)
  • 1.5945 (1)
  • 1.6535 (1)
  • 1.6929 (2)
  • 1.791 (1)
  • 1.8504 (1)
  • 1.9291 (1)
  • 1.9685 (1)
  • 2.0472 (2)
  • 2.0866 (1)
  • 2.087 (1)
  • 2.2244 (1)
  • 2.3622 (2)
  • 2.4016 (1)
  • 2.5591 (2)
  • 2.6772 (1)
  • 2.9921 (1)
  • 3.2283 (1)
  • 3.82 (1)
  • 3.937 (2)
  • 4.0748 (1)
  • 4.3307 (1)
  • 4.9213 (1)
  • 5.43 (1)
  • 5.4331 (2)
  • 5.9055 (1)
  • 7.874 (2)
to
Minimum Axial Groove Diameter
  • 2.0 (1)
  • 4.0 (1)
  • 6.0 (4)
  • 8.0 (2)
  • 8.5 (2)
  • 10.0 (4)
  • 11.0 (2)
  • 12.0 (3)
  • 13.5 (2)
  • 14.0 (4)
  • 15.0 (1)
  • 16.0 (4)
  • 19.0 (1)
  • 19.5 (1)
  • 20.0 (1)
  • 22.0 (1)
  • 22.5 (1)
  • 24.5 (1)
  • 25.0 (3)
  • 25.5 (2)
  • 29.0 (2)
  • 29.5 (2)
  • 33.5 (1)
  • 34.0 (2)
  • 36.0 (2)
  • 40.0 (1)
  • 40.5 (1)
  • 42.0 (1)
  • 43.0 (2)
  • 45.5 (1)
  • 47.0 (1)
  • 49.0 (1)
  • 50.0 (1)
  • 52.0 (2)
  • 53.0 (2)
  • 56.5 (1)
  • 60.0 (2)
  • 61.0 (1)
  • 65.0 (2)
  • 68.0 (1)
  • 76.0 (1)
  • 82.0 (1)
  • 97.0 (1)
  • 100.0 (2)
  • 103.5 (1)
  • 110.0 (1)
  • 125.0 (1)
  • 138.0 (3)
  • 150.0 (1)
  • 200.0 (2)
to
Maximum Axial Groove Diameter
  • 7.0 (1)
  • 8.0 (2)
  • 9.0 (1)
  • 9.5 (1)
  • 10.0 (2)
  • 11.5 (1)
  • 12.0 (5)
  • 14.0 (4)
  • 14.5 (1)
  • 16.0 (4)
  • 16.5 (1)
  • 17.0 (1)
  • 19.5 (1)
  • 20.0 (4)
  • 22.5 (1)
  • 23.0 (1)
  • 25.0 (1)
  • 25.5 (1)
  • 26.0 (1)
  • 30.0 (2)
  • 33.5 (1)
  • 37.0 (2)
  • 41.0 (1)
  • 43.5 (1)
  • 44.0 (1)
  • 53.0 (1)
  • 54.0 (1)
  • 58.0 (1)
  • 65.0 (1)
  • 66.0 (2)
  • 77.0 (1)
  • 83.0 (1)
  • 100.0 (1)
  • 102.0 (1)
  • 103.0 (1)
  • 130.0 (1)
  • 152.0 (1)
  • 205.0 (3)
  • 1020.0 (2)
to
Maximum Axial Groove Diameter
  • 0.2756 (1)
  • 0.315 (2)
  • 0.3543 (1)
  • 0.374 (1)
  • 0.3937 (2)
  • 0.4528 (1)
  • 0.472 (2)
  • 0.4724 (3)
  • 0.5511 (2)
  • 0.5512 (2)
  • 0.5709 (1)
  • 0.6299 (4)
  • 0.6496 (1)
  • 0.6693 (1)
  • 0.7677 (1)
  • 0.7874 (4)
  • 0.8743 (1)
  • 0.8858 (1)
  • 0.9055 (1)
  • 1.0039 (1)
  • 1.0236 (1)
  • 1.1811 (2)
  • 1.3189 (1)
  • 1.4567 (2)
  • 1.6142 (1)
  • 1.7126 (1)
  • 1.7323 (1)
  • 2.0866 (1)
  • 2.126 (1)
  • 2.28 (1)
  • 2.5591 (1)
  • 2.5984 (2)
  • 3.0315 (1)
  • 3.2677 (1)
  • 3.937 (1)
  • 4.0157 (1)
  • 4.0551 (1)
  • 5.1181 (1)
  • 5.9843 (1)
  • 8.0709 (2)
  • 8.071 (1)
  • 40.1575 (2)
to
Maximum Bore Depth
  • 14.27 (1)
  • 19.993 (1)
  • 20.4 (1)
  • 21.7 (1)
  • 22.992 (1)
  • 26.46 (1)
  • 27.993 (1)
  • 28.048 (1)
  • 29.993 (1)
  • 30.5 (1)
  • 32.5 (1)
  • 32.985 (1)
  • 33.985 (1)
  • 35.96 (1)
  • 38.5 (1)
  • 39.96 (1)
  • 39.985 (1)
  • 42.993 (1)
  • 43.048 (1)
  • 48.423 (1)
  • 54.992 (1)
  • 55.0 (1)
  • 57.827 (1)
  • 60.0 (2)
  • 69.992 (2)
  • 74.991 (1)
  • 74.992 (1)
  • 89.992 (2)
  • 99.992 (1)
  • 119.992 (1)
to
Maximum Bore Depth
  • 0.562 (1)
  • 0.7871 (1)
  • 0.803 (1)
  • 0.853 (1)
  • 0.9052 (1)
  • 1.042 (1)
  • 1.1021 (1)
  • 1.1043 (1)
  • 1.1808 (1)
  • 1.201 (1)
  • 1.279 (1)
  • 1.2986 (1)
  • 1.338 (1)
  • 1.416 (1)
  • 1.516 (1)
  • 1.573 (1)
  • 1.5742 (1)
  • 1.6926 (1)
  • 1.6948 (1)
  • 1.9064 (1)
  • 2.165 (1)
  • 2.1654 (1)
  • 2.2766 (1)
  • 2.3622 (2)
  • 2.7556 (2)
  • 2.9524 (2)
  • 3.543 (2)
  • 3.9367 (1)
  • 4.7241 (1)
to
frontEnd
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (91)
  • T-TRIANGLE 60 (2)
  • W-TRIGON 80 (4)
Maximum Cutting Depth
  • 3.5 (1)
  • 4.0 (2)
  • 4.5 (1)
  • 4.75 (1)
  • 5.0 (2)
  • 5.75 (1)
  • 6.0 (5)
  • 7.0 (4)
  • 7.25 (1)
  • 8.0 (4)
  • 8.25 (1)
  • 8.5 (1)
  • 9.75 (1)
  • 10.0 (4)
  • 11.25 (1)
  • 12.5 (1)
  • 12.75 (1)
  • 15.0 (1)
to
Maximum Cutting Depth
  • 0.1378 (1)
  • 0.1575 (2)
  • 0.1772 (1)
  • 0.187 (1)
  • 0.1969 (2)
  • 0.2264 (1)
  • 0.236 (2)
  • 0.2362 (3)
  • 0.2756 (4)
  • 0.2855 (1)
  • 0.315 (4)
  • 0.3248 (1)
  • 0.3347 (1)
  • 0.3839 (1)
  • 0.3937 (4)
  • 0.4372 (1)
  • 0.4429 (1)
  • 0.502 (1)
  • 0.5906 (1)
to
Cartridge Size
  • 1A. (1)
  • 1B. (1)
  • 1C. (1)
  • 1D. (1)
  • 1E. (1)
  • 1F. (1)
  • 1L. (1)
  • 1W (1)
  • 1X (1)
  • 1Y (1)
  • 2A. (1)
  • 2B. (1)
  • 2C. (1)
  • 2D. (1)
  • 2E. (1)
  • 2F. (1)
  • 2L. (3)
  • 2W (1)
  • 2X (1)
  • 2Y (1)
  • 3A. (1)
  • 3B. (1)
  • 3C. (1)
  • 3D. (1)
  • 3E. (1)
  • 3F. (2)
  • 3L. (1)
  • 3W (1)
  • 3X (1)
  • 3Y (1)
Gage Length
  • 12.5000 (1)
  • 14.6000 (1)
  • 16.0000 (3)
  • 22.5000 (1)
  • 29.5000 (1)
  • 30.0000 (1)
  • 32.5000 (1)
  • 39.9000 (2)
  • 40.0000 (3)
  • 40.1600 (1)
  • 41.0000 (2)
  • 42.5000 (1)
  • 45.0000 (1)
  • 46.4000 (1)
  • 48.0000 (1)
  • 50.0000 (7)
  • 51.7000 (1)
  • 58.6000 (1)
  • 59.8900 (1)
  • 60.0000 (5)
  • 60.1500 (1)
  • 68.0000 (1)
  • 69.9000 (1)
  • 70.0000 (4)
  • 70.1230 (1)
  • 72.0000 (2)
  • 72.0020 (1)
  • 75.0000 (3)
  • 76.0000 (2)
  • 76.0010 (1)
  • 80.0000 (2)
  • 82.0000 (1)
  • 83.0000 (1)
  • 84.0000 (1)
  • 85.0000 (5)
  • 85.4000 (1)
  • 86.0000 (3)
  • 88.0000 (1)
  • 90.0000 (2)
  • 93.0000 (1)
  • 95.4500 (1)
  • 95.6000 (1)
  • 96.0000 (1)
  • 100.0000 (8)
  • 101.0000 (1)
  • 102.0000 (2)
  • 103.0000 (1)
  • 104.0000 (1)
  • 105.0000 (1)
  • 107.0000 (3)
  • 110.0000 (3)
  • 116.0000 (2)
  • 117.0000 (1)
  • 120.0000 (1)
  • 121.0000 (1)
  • 122.0000 (1)
  • 124.4000 (1)
  • 127.0000 (1)
  • 133.0000 (1)
  • 138.0030 (2)
  • 148.2030 (1)
  • 152.0000 (1)
Gage Length
  • 0.4921 (1)
  • 0.5748 (1)
  • 0.6299 (3)
  • 0.8860 (1)
  • 1.1614 (1)
  • 1.1800 (1)
  • 1.2800 (1)
  • 1.5700 (2)
  • 1.5710 (2)
  • 1.5748 (1)
  • 1.5810 (1)
  • 1.6142 (2)
  • 1.6730 (1)
  • 1.7717 (1)
  • 1.8268 (1)
  • 1.8898 (1)
  • 1.9685 (6)
  • 1.9700 (1)
  • 2.0354 (1)
  • 2.3070 (1)
  • 2.3580 (1)
  • 2.3600 (3)
  • 2.3622 (2)
  • 2.3680 (1)
  • 2.6772 (1)
  • 2.7520 (1)
  • 2.7559 (4)
  • 2.7607 (1)
  • 2.8346 (2)
  • 2.8347 (1)
  • 2.9510 (1)
  • 2.9530 (2)
  • 2.9921 (2)
  • 2.9922 (1)
  • 3.1495 (1)
  • 3.1496 (1)
  • 3.2283 (1)
  • 3.2677 (1)
  • 3.3071 (1)
  • 3.3465 (5)
  • 3.3585 (1)
  • 3.3640 (1)
  • 3.3858 (2)
  • 3.4646 (1)
  • 3.5430 (1)
  • 3.5433 (1)
  • 3.6614 (1)
  • 3.7580 (1)
  • 3.7638 (1)
  • 3.7800 (1)
  • 3.9370 (8)
  • 3.9764 (1)
  • 4.0157 (2)
  • 4.0551 (1)
  • 4.0945 (1)
  • 4.1339 (1)
  • 4.2126 (3)
  • 4.3307 (2)
  • 4.3310 (1)
  • 4.5690 (1)
  • 4.5700 (1)
  • 4.6100 (1)
  • 4.7244 (1)
  • 4.7600 (1)
  • 4.8000 (1)
  • 4.8980 (1)
  • 5.0000 (1)
  • 5.1969 (1)
  • 5.4332 (2)
  • 5.8269 (1)
  • 5.9840 (1)
insertGeometry
Cutting Tool Material
  • B H (94)
  • B L (96)
  • C N (32)
  • D P (96)
  • H T (96)
  • H W (96)
backEnd
System Size
  • BT40 (2)
  • BT50 (4)
  • CV40 (2)
  • CV50 (4)
  • DV40 (2)
  • DV50 (4)
  • HSK100A (7)
  • HSK63A (17)
  • KM32TS (4)
  • KM40 (3)
  • KM40TS (6)
  • KM50 (8)
  • KM50TS (11)
  • KM63 (3)
  • KM63TS (3)
  • KM63XMZ (1)
  • KM80 (1)
  • KM80TS (5)
  • KR32 (16)
  • KR50 (8)
  • KR63 (3)
  • KR80 (3)
Back-End Diameter
  • 0.3937 (1)
  • 0.394 (4)
  • 0.6299 (24)
  • 0.63 (4)
to