successfully added to cart
View Cart
Read More

Doskonała jakość powierzchni i wyższa wydajność obróbki

Unikalna konstrukcja umożliwia zastosowanie tego narzędzia przy wielu przejściach, zwanych frezowaniem stopniowym.

Większość narzędzi pozostawia ślady po każdym przejściu, co skutkuje niezadowalającym lub niskiej jakości wykończeniem ścianek. Zwykle wymaga to kolejnego przejścia wykańczającego na samym końcu procesu.

Frez Mill 4-15 eliminuje to przejście wykańczające za pomocą dodatkowego narzędzia, oszczędzając czas i pieniądze.

Part of FirstChoice Products

Todas fazem parte do Programa First Choice.

Fácil de selecionar, fácil de pedir, fácil de aplicar e com performance excepcional. Saiba mais sobre o First Choice.

Zalecenia dotyczące stosowania kąta wcinania (frezowania skośnego)

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (142)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (136)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (136)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (136)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (136)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (136)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (142)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (142)
  • M Stainless Steel (142)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (142)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (142)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (142)
  • K Cast Iron (131)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (131)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (131)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (131)
  • N Non-Ferrous Materials (74)
    • N1
      Wrought Aluminum
      (74)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (74)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (74)
  • S High-Temp Alloys (134)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (121)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (121)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (121)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (134)
  • H Hardened Materials (96)
    • H1
      Hardened Materials 44-48 HRC
      (96)
Select First Choice
  • CN (91)
  • DE (91)
  • GB (20)
  • IN (17)
  • US (86)
Applications
  • Chamfer Milling Chamfer Milling (72)
  • Drilling Drilling (72)
  • Face Milling Face Milling (72)
  • Flat Bottom Drilling Flat Bottom Drilling (72)
  • ID Thread Turning ID Thread Turning (93)
  • Pipe Thread Pipe Thread (72)
  • Pocket Pocket (72)
  • Pocket Helical Pocket Helical (72)
  • Pocket Milling Pocket Milling (72)
  • Pocket Plunge Milling Pocket Plunge Milling (72)
  • Profile Milling Profile Milling (72)
  • Ramping Ramping (72)
  • Shoulder Ball Nose Shoulder Ball Nose (72)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (72)
  • Shoulder Milling Shoulder Milling (72)
  • Shoulder Roughing Shoulder Roughing (72)
  • Shoulder Square End Shoulder Square End (72)
  • Slot Ball Nose Slot Ball Nose (72)
  • Slot Milling Slot Milling (72)
  • Slot Side Slot Side (72)
  • Slot Square End Slot Square End (72)
  • Slot T Slot T (72)
  • Thread Milling Thread Milling (72)
  • Threading Threading (72)
Cutting Diameter
  • 25.0 (4)
  • 25.4 (5)
  • 31.75 (5)
  • 32.0 (7)
  • 35.0 (1)
  • 38.1 (6)
  • 40.0 (7)
  • 50.0 (3)
  • 50.8 (3)
  • 63.0 (3)
  • 63.5 (3)
  • 76.2 (4)
  • 80.0 (3)
  • 100.0 (3)
  • 101.6 (3)
  • 125.0 (3)
  • 127.0 (3)
  • 152.4 (3)
  • 160.0 (3)
to
Cutting Diameter
  • 0.984 (4)
  • 1.0 (5)
  • 1.25 (5)
  • 1.26 (7)
  • 1.378 (1)
  • 1.5 (6)
  • 1.575 (7)
  • 1.968 (2)
  • 1.969 (1)
  • 2.0 (3)
  • 2.48 (3)
  • 2.5 (3)
  • 3.0 (4)
  • 3.15 (3)
  • 3.937 (3)
  • 4.0 (3)
  • 4.921 (2)
  • 4.9213 (1)
  • 5.0 (3)
  • 6.0 (3)
  • 6.299 (1)
  • 6.2992 (2)
to
Cutting Length
  • 0.61 (62)
  • 0.6102 (10)
to
Cutting Length
  • 15.5 (72)
to
Reach
  • 31.75 (1)
  • 32.0 (2)
  • 40.0 (4)
  • 43.0 (2)
  • 44.45 (6)
  • 49.0 (2)
  • 50.0 (7)
  • 57.15 (8)
to
Reach
  • 1.25 (1)
  • 1.2598 (1)
  • 1.26 (1)
  • 1.575 (4)
  • 1.693 (2)
  • 1.696 (1)
  • 1.75 (6)
  • 1.929 (2)
  • 1.968 (2)
  • 1.969 (4)
  • 2.25 (8)
to
Tool Cutting Edge Angle
  • 90.0 (72)
to
Connection Style
  • 2 Key & Cutter Retention Screw (2)
  • 2 Key & Socket Head Cap Screw (1)
  • A-Socket Head Cap Screw (28)
  • B-Cutter Retention Screw (6)
  • SHCS or RetScrw Or BoltCircle (3)
  • Screw-On Connection (8)
  • Straight-Cylindrical (14)
  • Weldon (10)
Cutting Edges Per Insert
  • 4.0 (170)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.4 (89)
  • 0.8 (103)
  • 1.2 (94)
  • 1.6 (86)
  • 1.62 (77)
  • 2.0 (81)
to
Corner Radius
  • 0.0157 (78)
  • 0.016 (83)
  • 0.031 (84)
  • 0.0313 (91)
  • 0.047 (94)
  • 0.063 (86)
  • 0.064 (77)
  • 0.078 (81)
to
application
Grade Of Cutting Tool
  • KC422M (74)
  • KC520M (84)
  • KC522M (84)
  • KC725M (86)
  • KCK15 (86)
  • KCPK30 (85)
  • KCPM20 (80)
  • KCPM40 (85)
  • KCSM30 (76)
  • KCSM40 (78)
Hand Of Tool
  • R (72)
Wiper Insert
  • N (98)
frontEnd
Insert Shape
  • X-RECTANGLE MILL 4 90 (170)
Center Cutting
insertGeometry
Shape
  • X-RECTANGLE MILL 4 90 (98)
Cutting Edge Length
  • 0.636 (17)
  • 0.665 (25)
  • 0.666 (11)
  • 0.669 (6)
  • 0.67 (39)
to
Cutting Edge Length
  • 16.155 (17)
  • 16.9 (31)
  • 16.92 (5)
  • 17.0 (2)
  • 17.004 (6)
  • 17.01 (37)
to
Cutting Tool Material
  • H W (98)
Chip Breaker CBMD
  • GE (80)
  • GEH (1)
  • GEM (17)
Tolerance Class
  • G (62)
  • P (36)
backEnd
Connection Type
  • CYLINDRICAL (24)
  • SCREW-ON (8)
  • SHELL MILL (40)
Back-End Diameter
  • 0.5 (1)
  • 0.63 (2)
  • 0.75 (6)
  • 0.827 (2)
  • 0.867 (4)
  • 0.984 (3)
  • 1.0 (8)
  • 1.064 (2)
  • 1.1417 (1)
  • 1.142 (5)
  • 1.25 (8)
  • 1.2598 (2)
  • 1.26 (9)
  • 1.5 (6)
  • 1.5748 (3)
  • 1.575 (2)
  • 2.0 (3)
to
Back-End Diameter
  • 12.7 (1)
  • 16.0 (2)
  • 19.05 (6)
  • 21.0 (2)
  • 22.0 (6)
  • 25.0 (3)
  • 25.4 (8)
  • 27.0 (3)
  • 29.0 (6)
  • 31.75 (8)
  • 32.0 (12)
  • 38.1 (6)
  • 40.0 (6)
  • 50.8 (3)
to
other
Grade
  • KC422M (2)
  • KC520M (12)
  • KC522M (12)
  • KC725M (14)
  • KCK15 (14)
  • KCPK30 (13)
  • KCPM20 (8)
  • KCPM40 (13)
  • KCSM30 (4)
  • KCSM40 (6)
Platform
  • Mill 4-15 (170)
Tool Unit
  • I (132)
  • M (134)
Over All Length [L]
  • 39.986 (2)
  • 40.0 (6)
  • 40.005 (6)
  • 44.45 (4)
  • 50.0 (5)
  • 50.021 (1)
  • 50.8 (4)
  • 53.75 (1)
  • 54.0 (1)
  • 60.45 (3)
  • 60.452 (3)
  • 63.0 (6)
  • 64.5 (4)
  • 68.95 (2)
  • 89.0 (1)
  • 96.01 (1)
  • 100.0 (1)
  • 102.36 (1)
  • 110.0 (2)
  • 111.0 (3)
  • 115.02 (1)
  • 115.06 (1)
  • 115.062 (2)
  • 170.0 (1)
  • 200.0 (4)
  • 203.2 (3)
  • 254.0 (3)
to
Over All Length [L]
  • 1.574 (2)
  • 1.575 (12)
  • 1.75 (4)
  • 1.968 (3)
  • 1.9685 (2)
  • 1.969 (1)
  • 2.0 (4)
  • 2.116 (1)
  • 2.126 (1)
  • 2.38 (6)
  • 2.48 (3)
  • 2.4803 (3)
  • 2.539 (4)
  • 2.715 (2)
  • 3.5039 (1)
  • 3.78 (1)
  • 3.937 (1)
  • 4.03 (1)
  • 4.331 (2)
  • 4.37 (3)
  • 4.53 (4)
  • 6.693 (1)
  • 7.874 (4)
  • 8.0 (3)
  • 10.0 (3)
to
Head Length [L2]
  • 31.75 (1)
  • 32.0 (2)
  • 40.0 (4)
  • 43.0 (2)
  • 44.45 (6)
  • 49.0 (2)
  • 50.0 (7)
  • 57.15 (8)
to
Head Length [L2]
  • 1.25 (1)
  • 1.2598 (1)
  • 1.26 (1)
  • 1.575 (4)
  • 1.693 (2)
  • 1.75 (6)
  • 1.929 (2)
  • 1.968 (2)
  • 1.969 (5)
  • 2.25 (8)
to
Insert Hand
  • R (98)
Number of Inserts
  • 2.0 (9)
  • 3.0 (12)
  • 4.0 (13)
  • 5.0 (9)
  • 6.0 (6)
  • 7.0 (6)
  • 8.0 (5)
  • 9.0 (4)
  • 10.0 (1)
  • 11.0 (2)
  • 12.0 (4)
  • 16.0 (1)
to
No filters matching ""
View Products in
Metric
Inch
Seria Mill 4™

Frezowanie walcowo-czołowe • Płytka • LNGU15-EGE • Lekka
(17 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [LI] Insert Length [LI] Insert Length [S] Insert Thickness [S] Insert Thickness [W] Insert Width [W] Insert Width [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM] Cutting Edges per Insert
5588515 LNGU15T604ERGE LNGU541ERGE   KCPM40 17.0100 .6700 6.9600 .2740 10.0000 .3940 2.2000 .0870 0.4000 .0160 0.0800 .0030 4
    List price:
    $31.32 /each.
    Your price::
    Qty

    Sold in pkg. of 10

    5588513 LNGU15T604ERGE LNGU541ERGE   KC725M 17.0100 .6700 6.9600 .2740 10.0000 .3940 2.2000 .0870 0.4000 .0160 0.0800 .0030 4
      List price:
      $30.42 /each.
      Your price::
      Qty

      Sold in pkg. of 10

      5588388 LNGU15T608ERGE LNGU542ERGE   KC522M 17.0100 .6700 6.9600 .2740 10.0000 .3940 1.8000 .0720 0.8000 .0310 0.0800 .0030 4
        List price:
        $30.13 /each.
        Your price::
        Qty

        Sold in pkg. of 10

        5588387 LNGU15T608ERGE LNGU542ERGE   KCPM40 17.0100 .6700 6.9600 .2740 10.0000 .3940 1.8000 .0720 0.8000 .0310 0.0800 .0030 4
          List price:
          $31.32 /each.
          Your price::
          Qty

          Sold in pkg. of 10

          5588385 LNGU15T608ERGE LNGU542ERGE   KC725M 17.0100 .6700 6.9600 .2740 10.0000 .3940 1.8000 .0720 0.8000 .0310 0.0800 .0030 4
            List price:
            $30.42 /each.
            Your price::
            Qty

            Sold in pkg. of 10

            6165422 LNGU15T608ERGE LNGU542ERGE   KCSM40 17.0100 .6700 6.9600 .2740 10.0000 .3940 1.8000 .0720 0.8000 .0310 0.0800 .0030 4
              List price:
              $30.40 /each.
              Your price::
              Qty

              Sold in pkg. of 10

              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty

              Sold in pkg. of

              Seria Mill 4™

              Frezowanie walcowo-czołowe • Płytka • LNGU15-EGEJ • Lekka – średnia
              (2 Products)
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [LI] Insert Length [LI] Insert Length [S] Insert Thickness [S] Insert Thickness [W] Insert Width [W] Insert Width [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM] Cutting Edges per Insert
              6001231 LNGU15T604ERGEJ LNGU541ERGEJ   KC422M 17.0000 .6700 6.9600 .2740 10.0000 .3940 2.2000 .0870 0.4000 .0160 0.0300 .0012 4
                List price:
                $34.67 /each.
                Your price::
                Qty

                Sold in pkg. of 10

                6001232 LNGU15T608ERGEJ LNGU542ERGEJ   KC422M 17.0000 .6700 6.9600 .2740 10.0000 .3940 1.8000 .0720 0.8000 .0310 0.0300 .0012 4
                  List price:
                  $34.67 /each.
                  Your price::
                  Qty

                  Sold in pkg. of 10

                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is not available
                  Replacement Product This item may be available through a distributor
                  Qty

                  Sold in pkg. of

                  Seria Mill 4™

                  Frezowanie walcowo-czołowe • Płytka • LNGU15-SGE • Średnia
                  (25 Products)
                  View Products
                  SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [LI] Insert Length [LI] Insert Length [S] Insert Thickness [S] Insert Thickness [W] Insert Width [W] Insert Width [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM] Cutting Edges per Insert
                  5516075 LNGU15T604SRGE LNGU541SRGE   KC725M 17.0040 .6690 6.9600 .2740 10.0000 .3937 2.2000 .0860 0.4000 .0157 0.1000 .0039 4
                    List price:
                    $29.54 /each.
                    Your price::
                    Qty

                    Sold in pkg. of 10

                    5516073 LNGU15T604SRGE LNGU541SRGE   KC520M 17.0040 .6690 6.9600 .2740 10.0000 .3937 2.2000 .0860 0.4000 .0157 0.1000 .0039 4
                      List price:
                      $29.27 /each.
                      Your price::
                      Qty

                      Sold in pkg. of 10

                      5516076 LNGU15T604SRGE LNGU541SRGE   KCK15 17.0040 .6690 6.9600 .2740 10.0000 .3937 2.2000 .0860 0.4000 .0157 0.1000 .0039 4
                        List price:
                        $30.71 /each.
                        Your price::
                        Qty

                        Sold in pkg. of 10

                        5515892 LNGU15T608SRGE LNGU542SRGE   KCK15 17.0100 .6700 6.9600 .2740 10.0000 .3937 1.8000 .0710 0.8000 .0313 0.1000 .0039 4
                          List price:
                          $30.71 /each.
                          Your price::
                          Qty

                          Sold in pkg. of 10

                          5515759 LNGU15T608SRGE LNGU542SRGE   KC520M 17.0100 .6700 6.9600 .2740 10.0000 .3937 1.8000 .0710 0.8000 .0313 0.1000 .0039 4
                            List price:
                            $29.27 /each.
                            Your price::
                            Qty

                            Sold in pkg. of 10

                            5515894 LNGU15T608SRGE LNGU542SRGE   KCPM20 17.0100 .6700 6.9600 .2740 10.0000 .3937 1.8000 .0710 0.8000 .0313 0.1000 .0039 4
                              List price:
                              $30.71 /each.
                              Your price::
                              Qty

                              Sold in pkg. of 10

                              List price:
                              Discount: %
                              Your price::
                              Replacement This item is not available
                              Replacement Product This item may be available through a distributor
                              Qty

                              Sold in pkg. of

                              Seria Mill 4™

                              Frezowanie walcowo-czołowe • Płytka • LNGU15-SGEH • Frezowanie o spiralnej krawędzi skrawającej
                              (1 Products)
                              View Products
                              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [LI] Insert Length [LI] Insert Length [S] Insert Thickness [S] Insert Thickness [W] Insert Width [W] Insert Width [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM] Cutting Edges per Insert
                              6044824 LNGU15T608SRGEH LNGU542SRGEH   KCSM40 17.0100 .6700 6.9600 .2740 10.0000 .3937 1.8000 .0711 0.8000 .0310 0.1000 .0039 4
                                List price:
                                $31.55 /each.
                                Your price::
                                Qty

                                Sold in pkg. of 10

                                List price:
                                Discount: %
                                Your price::
                                Replacement This item is not available
                                Replacement Product This item may be available through a distributor
                                Qty

                                Sold in pkg. of

                                Seria Mill 4™

                                Frezowanie walcowo-czołowe • Płytka • LNGU15-SGE • Ciężka
                                (17 Products)
                                View Products
                                SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [LI] Insert Length [LI] Insert Length [S] Insert Thickness [S] Insert Thickness [W] Insert Width [W] Insert Width [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM] Cutting Edges per Insert
                                5575829 LNGU15T608SRGEM LNGU542SRGEM   KCPK30 17.0100 .6700 6.9600 .2740 10.0000 .3940 1.7000 .0670 0.8000 .0310 0.1000 .0040 4
                                  List price:
                                  $32.25 /each.
                                  Your price::
                                  Qty

                                  Sold in pkg. of 10

                                  5575827 LNGU15T608SRGEM LNGU542SRGEM   KC520M 17.0100 .6700 6.9600 .2740 10.0000 .3940 1.7000 .0670 0.8000 .0310 0.1000 .0040 4
                                    List price:
                                    $31.64 /each.
                                    Your price::
                                    Qty

                                    Sold in pkg. of 10

                                    5575828 LNGU15T608SRGEM LNGU542SRGEM   KCK15 17.0100 .6700 6.9600 .2740 10.0000 .3940 1.7000 .0670 0.8000 .0310 0.1000 .0040 4
                                      List price:
                                      $32.25 /each.
                                      Your price::
                                      Qty

                                      Sold in pkg. of 10

                                      5976170 LNGU15T608SRGEM LNGU542SRGEM   KCPM40 17.0100 .6700 6.9600 .2740 10.0000 .3940 1.7000 .0670 0.8000 .0310 0.1000 .0040 4
                                        List price:
                                        $31.30 /each.
                                        Your price::
                                        Qty

                                        Sold in pkg. of 10

                                        5947280 LNGU15T612SRGEM LNGU543SRGEM   KC520M 17.0100 .6700 6.9600 .2740 10.0000 .3940 1.3000 .0530 1.2000 .0470 0.1000 .0039 4
                                          List price:
                                          $30.71 /each.
                                          Your price::
                                          Qty

                                          Sold in pkg. of 10

                                          5976671 LNGU15T612SRGEM LNGU543SRGEM   KCPM40 17.0100 .6700 6.9600 .2740 10.0000 .3940 1.3000 .0530 1.2000 .0470 0.1000 .0039 4
                                            List price:
                                            $31.30 /each.
                                            Your price::
                                            Qty

                                            Sold in pkg. of 10

                                            List price:
                                            Discount: %
                                            Your price::
                                            Replacement This item is not available
                                            Replacement Product This item may be available through a distributor
                                            Qty

                                            Sold in pkg. of

                                            Seria Mill 4™

                                            Frezowanie walcowo-czołowe • Płytka • LNPU15-SGE • Średnia
                                            (31 Products)
                                            View Products
                                            SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [LI] Insert Length [LI] Insert Length [S] Insert Thickness [S] Insert Thickness [W] Insert Width [W] Insert Width [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM] Cutting Edges per Insert
                                            5608034 LNPU15T604SRGE LNPU541SRGE   KC520M 16.9000 .6650 6.9600 .2740 10.0000 .3937 2.2000 .0852 0.4000 .0160 0.1000 .0039 4
                                              List price:
                                              $24.97 /each.
                                              Your price::
                                              Qty

                                              Sold in pkg. of 10

                                              5608037 LNPU15T604SRGE LNPU541SRGE   KCK15 16.9000 .6650 6.9600 .2740 10.0000 .3937 2.2000 .0852 0.4000 .0160 0.1000 .0039 4
                                                List price:
                                                $24.97 /each.
                                                Your price::
                                                Qty

                                                Sold in pkg. of 10

                                                5608036 LNPU15T604SRGE LNPU541SRGE   KC725M 16.9000 .6650 6.9600 .2740 10.0000 .3937 2.2000 .0852 0.4000 .0160 0.1000 .0039 4
                                                  List price:
                                                  $25.21 /each.
                                                  Your price::
                                                  Qty

                                                  Sold in pkg. of 10

                                                  5547848 LNPU15T608SRGE LNPU542SRGE   KC520M 16.9000 .6650 6.9600 .2740 10.0000 .3940 1.8000 .0701 0.8000 .0312 0.1000 .0039 4
                                                    List price:
                                                    $24.97 /each.
                                                    Your price::
                                                    Qty

                                                    Sold in pkg. of 10

                                                    5548041 LNPU15T608SRGE LNPU542SRGE   KCK15 16.9000 .6650 6.9600 .2740 10.0000 .3940 1.8000 .0701 0.8000 .0312 0.1000 .0039 4
                                                      List price:
                                                      $24.97 /each.
                                                      Your price::
                                                      Qty

                                                      Sold in pkg. of 10

                                                      5548042 LNPU15T608SRGE LNPU542SRGE   KCPK30 16.9000 .6650 6.9600 .2740 10.0000 .3940 1.8000 .0701 0.8000 .0312 0.1000 .0039 4
                                                        List price:
                                                        $24.97 /each.
                                                        Your price::
                                                        Qty

                                                        Sold in pkg. of 10

                                                        List price:
                                                        Discount: %
                                                        Your price::
                                                        Replacement This item is not available
                                                        Replacement Product This item may be available through a distributor
                                                        Qty

                                                        Sold in pkg. of

                                                        Seria Mill 4™

                                                        Frezowanie walcowo-trzpieniowe • Frez trzpieniowy • Chwyt walcowy
                                                        (8 Products)
                                                        • Face MillingFace Milling
                                                        • Slotting: Square EndSlotting: Square End
                                                        • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
                                                        • Shank - Cylindrical  PlainShank - Cylindrical Plain
                                                        • Milling - Through CoolantMilling - Through Coolant
                                                        View Products
                                                        SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Weight Kilograms Max RPM
                                                        5531915 M4D025Z02A25LN15L100 M4D025Z02A25LN15L100   25.0000 .9840 25.0 .984 100.0000 3.937 43.0000 1.693 15.5000 .6100 2 0.28 26700
                                                          List price:
                                                          $291.37 /each.
                                                          Your price::
                                                          Qty
                                                          5531916 M4D025Z02A25LN15L170 M4D025Z02A25LN15L170   25.0000 .9840 25.0 .984 170.0000 6.693 43.0000 1.693 15.5000 .6100 2 0.58