Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Toczenie

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (11050)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (11026)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (11026)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (11026)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (11034)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (11034)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (11042)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (11042)
  • M Stainless Steel (7527)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (7527)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (7527)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (7527)
  • K Cast Iron (7565)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (7504)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (7469)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (7270)
  • N Non-Ferrous Materials (3998)
    • N1
      Wrought Aluminum
      (3530)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (3304)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (320)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (3996)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (3406)
    • N6
      Carbon, Graphite Composites, CFRP
      (3034)
    • N7
      MMC's
      (636)
  • S High-Temp Alloys (7599)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (7564)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (7576)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (7576)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (6292)
  • H Hardened Materials (2327)
    • H1
      Hardened Materials 44-48 HRC
      (2327)
    • H2
      Hardened Materials 48-55 HRC
      (1909)
    • H3
      Hardened Materials 56-60 HRC
      (1103)
    • H4
      Hardened Materials >60 HRC
      (772)
Select First Choice
  • CN (1421)
  • DE (1444)
  • GB (340)
  • IN (479)
  • US (1560)
Applications
  • Back Boring Back Boring (4549)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (576)
  • Blind Hole Finishing Blind Hole Finishing (576)
  • Boring Boring (2563)
  • CRT Boring CRT Boring (574)
  • CRT Profiling CRT Profiling (570)
  • Chamfer Milling Chamfer Milling (363)
  • Chamfer Turning Chamfer Turning (2616)
  • Convex Drilling Convex Drilling (1)
  • Corner Style SquareEnd Drilling Corner Style SquareEnd Drilling (1)
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (1)
  • Counterboring Counterboring (1)
  • Countersinking Countersinking (1)
  • Cut-Off Cut-Off (4935)
  • Deep Grooving Deep Grooving (1642)
  • Drilling Drilling (547)
  • Face Grooving Face Grooving (4776)
  • Face Milling Face Milling (546)
  • Facing Facing (6113)
  • Grooving Grooving (5038)
  • ID Facing ID Facing (4789)
  • ID Grooving ID Grooving (4834)
  • ID Thread Turning ID Thread Turning (22473)
  • Inclined Entry Drilling Inclined Entry Drilling (1)
  • Inclined Exit Drilling Inclined Exit Drilling (1)
  • Multiple Direction Cutting Multiple Direction Cutting (5640)
  • OD Thread Turning OD Thread Turning (3785)
  • Plunge Turning Plunge Turning (5660)
  • Pre-Condition Pre-Condition (1)
  • Profiling Profiling (7358)
  • Shoulder Milling Shoulder Milling (363)
  • Stacked Plates Drilling Stacked Plates Drilling (1)
  • TRN Boring TRN Boring (2787)
  • Threading Threading (963)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (576)
  • Through Hole Finishing Through Hole Finishing (576)
  • Turning Turning (6596)
  • X-Offset Drilling X-Offset Drilling (1)
Type of Thread
  • 60 (3)
  • ACME (1)
  • API (1)
  • API RD (1)
  • BSW (1)
  • BUTTRESS (3)
  • M (2)
  • NPT (1)
  • STUB ACME (1)
  • UN (3)
  • UNJ (1)
Cutting Condition
  • Heavily Interrupted Cut (4441)
  • Interrupted (174)
  • Lightly Interrupted Cut (5492)
  • Smooth Cut (9277)
  • Varying Depth of Cut (5909)
Tool Cutting Edge Angle
  • 45.0 (368)
  • 48.0 (9)
  • 49.783 (2)
  • 50.0 (29)
  • 60.0 (54)
  • 62.5 (61)
  • 63.0 (30)
  • 72.5 (34)
  • 75.0 (622)
  • 85.0 (24)
  • 89.0 (2)
  • 90.0 (2718)
  • 91.0 (3)
  • 92.0 (5)
  • 92.25 (32)
  • 93.0 (934)
  • 95.0 (1439)
  • 97.0 (10)
  • 97.5 (4)
  • 100.0 (1)
  • 105.0 (4)
  • 107.5 (171)
  • 117.5 (23)
  • 140.0 (4)
to
Cutting Edges Per Insert
  • 0.0 (141)
  • 1.0 (2006)
  • 2.0 (7931)
  • 3.0 (2010)
  • 4.0 (5251)
  • 6.0 (2555)
  • 8.0 (3601)
  • 16.0 (2)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.0 (1)
  • 0.026 (2)
  • 0.03 (2)
  • 0.038 (8)
  • 0.05 (22)
  • 0.051 (4)
  • 0.066 (1)
  • 0.076 (3)
  • 0.08 (22)
  • 0.089 (179)
  • 0.09 (84)
  • 0.094 (1)
  • 0.1 (260)
  • 0.102 (83)
  • 0.116 (1)
  • 0.127 (5)
  • 0.13 (69)
  • 0.131 (1)
  • 0.132 (1)
  • 0.133 (1)
  • 0.15 (33)
  • 0.155 (1)
  • 0.157 (1)
  • 0.165 (1)
  • 0.173 (1)
  • 0.177 (13)
  • 0.178 (6)
  • 0.18 (47)
  • 0.185 (65)
  • 0.19 (351)
  • 0.191 (1044)
  • 0.198 (1)
  • 0.2 (1329)
  • 0.202 (2)
  • 0.203 (237)
  • 0.224 (1)
  • 0.235 (1)
  • 0.244 (1)
  • 0.25 (9)
  • 0.251 (1)
  • 0.254 (1)
  • 0.255 (2)
  • 0.269 (1)
  • 0.282 (1)
  • 0.284 (1)
  • 0.3 (141)
  • 0.315 (95)
  • 0.318 (108)
  • 0.33 (1)
  • 0.34 (9)
  • 0.343 (16)
  • 0.356 (1)
  • 0.38 (38)
  • 0.381 (15)
  • 0.394 (2)
  • 0.396 (39)
  • 0.397 (601)
  • 0.4 (4269)
  • 0.404 (1)
  • 0.406 (79)
  • 0.43 (1)
  • 0.445 (1)
  • 0.472 (1)
  • 0.49 (1)
  • 0.5 (166)
  • 0.508 (13)
  • 0.565 (10)
  • 0.57 (11)
  • 0.572 (372)
  • 0.575 (30)
  • 0.6 (9)
  • 0.703 (4)
  • 0.75 (11)
  • 0.787 (102)
  • 0.79 (135)
  • 0.791 (4)
  • 0.792 (36)
  • 0.794 (928)
  • 0.795 (9)
  • 0.8 (6468)
  • 0.826 (21)
  • 0.84 (25)
  • 0.902 (1)
  • 1.0 (125)
  • 1.06 (46)
  • 1.122 (17)
  • 1.18 (16)
  • 1.188 (2)
  • 1.19 (89)
  • 1.191 (659)
  • 1.194 (77)
  • 1.195 (10)
  • 1.2 (3789)
  • 1.21 (18)
  • 1.25 (17)
  • 1.5 (135)
  • 1.525 (43)
  • 1.56 (71)
  • 1.58 (5)
  • 1.585 (17)
  • 1.587 (36)
  • 1.588 (406)
  • 1.59 (112)
  • 1.6 (1733)
  • 1.65 (71)
  • 1.75 (17)
  • 1.98 (7)
  • 1.981 (27)
  • 1.984 (2)
  • 2.0 (116)
  • 2.025 (34)
  • 2.06 (67)
  • 2.25 (12)
  • 2.37 (63)
  • 2.375 (6)
  • 2.38 (107)
  • 2.381 (52)
  • 2.388 (70)
  • 2.39 (5)
  • 2.4 (359)
  • 2.44 (67)
  • 2.5 (80)
  • 2.525 (33)
  • 2.56 (45)
  • 2.781 (4)
  • 3.0 (86)
  • 3.025 (30)
  • 3.06 (39)
  • 3.17 (38)
  • 3.175 (145)
  • 3.18 (56)
  • 3.2 (52)
  • 3.24 (39)
  • 3.96 (20)
  • 3.962 (2)
  • 3.969 (17)
  • 3.97 (20)
  • 4.0 (133)
  • 4.025 (23)
  • 4.03 (21)
  • 4.06 (21)
  • 4.76 (19)
  • 4.7625 (158)
  • 4.763 (48)
  • 5.0 (82)
  • 5.025 (25)
  • 6.0 (65)
  • 6.35 (268)
  • 7.912 (2)
  • 7.9375 (25)
  • 8.0 (40)
  • 9.525 (59)
  • 10.0 (56)
  • 12.5 (30)
  • 12.7 (42)
  • 15.875 (2)
  • 16.0 (30)
  • 25.4 (2)
  • -4999.5 (5)
to
Corner Radius
  • 0.0 (1)
  • 0.0011 (2)
  • 0.0015 (8)
  • 0.002 (26)
  • 0.0026 (1)
  • 0.003 (3)
  • 0.0031 (22)
  • 0.0035 (260)
  • 0.0037 (1)
  • 0.004 (285)
  • 0.0046 (1)
  • 0.005 (80)
  • 0.0052 (1)
  • 0.0053 (1)
  • 0.0059 (6)
  • 0.006 (28)
  • 0.0062 (1)
  • 0.0065 (1)
  • 0.0068 (1)
  • 0.007 (58)
  • 0.0075 (1463)
  • 0.0078 (1)
  • 0.0079 (68)
  • 0.008 (1397)
  • 0.0083 (40)
  • 0.0088 (1)
  • 0.0093 (1)
  • 0.0096 (1)
  • 0.0099 (1)
  • 0.01 (11)
  • 0.0106 (1)
  • 0.0111 (1)
  • 0.0112 (1)
  • 0.0118 (31)
  • 0.012 (110)
  • 0.0124 (1)
  • 0.0125 (202)
  • 0.013 (7)
  • 0.0135 (16)
  • 0.014 (3)
  • 0.015 (127)
  • 0.0155 (2)
  • 0.0156 (4139)
  • 0.0157 (164)
  • 0.0158 (61)
  • 0.0159 (1)
  • 0.016 (847)
  • 0.017 (1)
  • 0.0175 (1)
  • 0.0186 (1)
  • 0.0193 (1)
  • 0.0197 (162)
  • 0.02 (17)
  • 0.0225 (422)
  • 0.0295 (11)
  • 0.031 (748)
  • 0.0311 (4)
  • 0.0312 (539)
  • 0.0313 (6271)
  • 0.0315 (103)
  • 0.032 (283)
  • 0.0325 (21)
  • 0.033 (25)
  • 0.0355 (1)
  • 0.039 (44)
  • 0.0394 (81)
  • 0.042 (46)
  • 0.046 (16)
  • 0.0468 (2)
  • 0.0469 (4052)
  • 0.047 (494)
  • 0.0472 (2)
  • 0.048 (45)
  • 0.0487 (20)
  • 0.0492 (17)
  • 0.059 (100)
  • 0.0591 (66)
  • 0.06 (43)
  • 0.062 (111)
  • 0.0625 (2056)
  • 0.063 (242)
  • 0.065 (71)
  • 0.0689 (17)
  • 0.078 (34)
  • 0.0781 (5)
  • 0.0785 (34)
  • 0.0787 (18)
  • 0.079 (85)
  • 0.0797 (34)
  • 0.081 (67)
  • 0.0886 (12)
  • 0.093 (63)
  • 0.0935 (6)
  • 0.0937 (1)
  • 0.0938 (394)
  • 0.094 (202)
  • 0.096 (67)
  • 0.098 (65)
  • 0.0984 (35)
  • 0.0985 (24)
  • 0.0994 (33)
  • 0.101 (45)
  • 0.1095 (4)
  • 0.115 (21)
  • 0.118 (56)
  • 0.1181 (49)
  • 0.1191 (30)
  • 0.121 (39)
  • 0.125 (257)
  • 0.126 (5)
  • 0.127 (35)
  • 0.128 (34)
  • 0.155 (15)
  • 0.156 (39)
  • 0.1563 (41)
  • 0.1565 (17)
  • 0.157 (29)
  • 0.1575 (108)
  • 0.158 (32)
  • 0.1585 (23)
  • 0.159 (16)
  • 0.16 (21)
  • 0.1875 (207)
  • 0.188 (18)
  • 0.196 (8)
  • 0.1969 (69)
  • 0.197 (28)
  • 0.1978 (25)
  • 0.236 (4)
  • 0.2362 (61)
  • 0.25 (268)
  • 0.3115 (2)
  • 0.312 (20)
  • 0.3125 (25)
  • 0.315 (40)
  • 0.375 (59)
  • 0.3935 (15)
  • 0.3937 (41)
  • 0.4688 (2)
  • 0.492 (11)
  • 0.4922 (19)
  • 0.5 (42)
  • 0.625 (2)
  • 0.6299 (20)
  • 0.63 (10)
  • 0.787 (7)
  • 1.0 (2)
  • -4999.5 (5)
to
application
Minimum Feed
Minimum Feed
Drilling Condition
  • Heavily Interrupted Cut (3824)
  • Interrupted (23)
  • Lightly Interrupted Cut (4858)
  • Smooth Cut (8610)
  • Varying Depth of Cut (5271)
Grade Of Cutting Tool
  • 13E (170)
  • 241 (37)
  • AC5 (43)
  • CG4 (27)
  • CL4 (121)
  • CM2 (163)
  • CM3 (208)
  • CM4 (117)
  • CM5 (36)
  • CPX (165)
  • CW2 (67)
  • GX (136)
  • HT2 (64)
  • HTX (83)
  • K060 (139)
  • K090 (299)
  • K1 (90)
  • K1025 (61)
  • K10M (145)
  • K10P (149)
  • K10U (157)
  • K11 (11)
  • K15U (136)
  • K20K (192)
  • K21 (177)
  • K25M (129)
  • K25P (171)
  • K2884 (17)
  • K2885 (51)
  • K313 (1024)
  • K35P (85)
  • K40 (17)
  • K420 (302)
  • K45 (183)
  • K4H (4)
  • K6 (41)
  • K68 (651)
  • K8 (1)
  • K8735 (5)
  • KB1340 (104)
  • KB1345 (108)
  • KB1610 (175)
  • KB1625 (143)
  • KB1630 (246)
  • KB5610 (134)
  • KB5625 (307)
  • KB5630 (83)
  • KB9610 (249)
  • KB9640 (133)
  • KBH10 (192)
  • KBH10B (97)
  • KBH20 (240)
  • KBH20B (98)
  • KBK35 (48)
  • KBK45 (26)
  • KC210 (165)
  • KC250 (184)
  • KC5010 (1471)
  • KC5020P (18)
  • KC5025 (1230)
  • KC5115RR (2)
  • KC5125RR (8)
  • KC514M (3)
  • KC522M (3)
  • KC525M (2)
  • KC5410 (365)
  • KC5510 (198)
  • KC5525 (82)
  • KC710 (152)
  • KC715M (7)
  • KC720 (454)
  • KC722 (40)
  • KC725M (41)
  • KC730 (964)
  • KC7310 (306)
  • KC732 (369)
  • KC735M (2)
  • KC740 (9)
  • KC792M (8)
  • KC8050 (752)
  • KC810 (669)
  • KC850 (936)
  • KC9010 (360)
  • KC9025 (708)
  • KC910 (535)
  • KC9105 (380)
  • KC9110 (1223)
  • KC9110RR (7)
  • KC9115RR (2)
  • KC9120 (398)
  • KC9125 (910)
  • KC9125RR (53)
  • KC9140 (389)
  • KC9145 (209)
  • KC915M (3)
  • KC920M (11)
  • KC9215 (249)
  • KC9225 (629)
  • KC9240 (481)
  • KC9240NEW (454)
  • KC9245 (241)
  • KC925M (16)
  • KC9315 (615)
  • KC9320 (395)
  • KC9325 (360)
  • KC935 (717)
  • KC935M (1)
  • KC950 (525)
  • KC990 (455)
  • KCD25 (105)
  • KCK05 (390)
  • KCK05B (195)
  • KCK15 (353)
  • KCK15B (398)
  • KCK20 (648)
  • KCK20B (715)
  • KCM15 (470)
  • KCM15B (300)
  • KCM25 (516)
  • KCM25B (389)
  • KCM35 (268)
  • KCM35B (339)
  • KCP05 (405)
  • KCP05B (151)
  • KCP10 (972)
  • KCP10B (946)
  • KCP15 (2)
  • KCP25 (1058)
  • KCP25B (1112)
  • KCP30 (398)
  • KCP30B (210)
  • KCP40 (332)
  • KCP40B (234)
  • KCPK05 (201)
  • KCPK30 (8)
  • KCS10 (227)
  • KCS10B (369)
  • KCSM30 (3)
  • KCU10 (1810)
  • KCU25 (1646)
  • KD050 (199)
  • KD081 (184)
  • KD100 (184)
  • KD105 (20)
  • KD120 (230)
  • KD1400 (147)
  • KD1405 (189)
  • KD1425 (196)
  • KD200 (9)
  • KD230 (14)
  • KD240 (15)
  • KM1 (178)
  • KMF (53)
  • KMS (53)
  • KT1120 (18)
  • KT125 (223)
  • KT150 (217)
  • KT175 (257)
  • KT195M (7)
  • KT315 (717)
  • KT325 (100)
  • KT5020 (24)
  • KTP10 (107)
  • KU10 (229)
  • KU10T (377)
  • KU25T (21)
  • KU30T (575)
  • KY1310 (199)
  • KY1320 (215)
  • KY1335 (5)
  • KY1525 (31)
  • KY1540 (191)
  • KY1615 (360)
  • KY2000 (208)
  • KY2100 (121)
  • KY2200 (1)
  • KY3000 (227)
  • KY3400 (227)
  • KY3500 (447)
  • KY4000 (97)
  • KY4300 (156)
  • KY4400 (263)
  • KYHS10 (3)
  • KYK10 (166)
  • KYK25 (190)
  • KYK35 (245)
  • KYS25 (145)
  • KYS30 (222)
  • KYSM10 (3)
  • KYSP30 (5)
  • MC2 (59)
  • MC3 (2)
  • NL200 (36)
  • NL250 (152)
  • NL300 (141)
  • NL400 (40)
  • NL920 (137)
  • P10 (17)
  • P20 (9)
  • P25 (125)
  • P2F (34)
  • PS5 (44)
  • SF30 (2)
  • SP0819 (93)
  • SP0A00 (8)
  • SP3019 (120)
  • SP4019 (96)
  • SP4200 (8)
  • SP61EJ (44)
  • SP88F8 (21)
  • SPADAP (7)
  • SPM5F2 (2)
  • SPMQMA (7)
  • SPSREJ (16)
  • TN7035 (24)
  • TTX (25)
  • X00511 (36)
  • YY87EL (8)
  • YYMITA (9)
Wiper Insert
  • N (22592)
  • Y (765)
Minimum Axial Groove Diameter
  • 0.0 (68)
  • 0.18 (10)
  • 0.2039 (1)
  • 0.204 (13)
  • 0.2079 (1)
  • 0.208 (10)
  • 0.218 (4)
  • 0.224 (7)
  • 0.2276 (2)
  • 0.228 (10)
  • 0.23 (1)
  • 0.2339 (5)
  • 0.234 (15)
  • 0.2362 (3)
  • 0.243 (2)
  • 0.244 (1)
  • 0.2598 (2)
  • 0.26 (7)
  • 0.267 (4)
  • 0.272 (1)
  • 0.275 (11)
  • 0.278 (1)
  • 0.279 (5)
  • 0.2791 (1)
  • 0.28 (3)
  • 0.285 (31)
  • 0.292 (6)
  • 0.2921 (1)
  • 0.2957 (1)
  • 0.296 (10)
  • 0.2992 (3)
  • 0.3 (5)
  • 0.321 (4)
  • 0.346 (1)
  • 0.347 (4)
  • 0.356 (6)
  • 0.3575 (2)
  • 0.358 (7)
  • 0.36 (5)
  • 0.3602 (1)
  • 0.362 (1)
  • 0.413 (1)
  • 0.415 (16)
  • 0.431 (1)
  • 0.433 (8)
  • 0.4331 (10)
  • 0.4378 (1)
  • 0.438 (5)
  • 0.439 (3)
  • 0.44 (2)
  • 0.453 (2)
  • 0.4799 (5)
  • 0.48 (33)
  • 0.49 (2)
  • 0.508 (2)
  • 0.5118 (26)
  • 0.512 (11)
  • 0.5181 (1)
  • 0.538 (1)
  • 0.54 (2)
  • 0.563 (6)
  • 0.6 (53)
  • 0.625 (4)
  • 0.6299 (50)
  • 0.63 (21)
  • 0.65 (1)
  • 0.66 (2)
  • 0.6693 (4)
  • 0.67 (2)
  • 0.728 (2)
  • 0.7299 (2)
  • 0.73 (14)
  • 0.731 (4)
  • 0.75 (1)
  • 0.77 (48)
  • 0.7701 (7)
  • 0.787 (29)
  • 0.7874 (72)
  • 0.8 (1)
  • 0.8268 (8)
  • 0.836 (1)
  • 0.842 (1)
  • 0.85 (13)
  • 0.855 (1)
  • 0.866 (3)
  • 0.8661 (2)
  • 0.9 (4)
  • 0.9299 (6)
  • 0.93 (44)
  • 0.9799 (1)
  • 0.98 (25)
  • 0.984 (43)
  • 0.9843 (85)
  • 1.0 (8)
  • 1.02 (1)
  • 1.0236 (9)
  • 1.024 (5)
  • 1.03 (1)
  • 1.06 (3)
  • 1.063 (2)
  • 1.102 (2)
  • 1.1024 (3)
  • 1.125 (4)
  • 1.177 (1)
  • 1.181 (7)
  • 1.1811 (2)
  • 1.19 (5)
  • 1.2 (61)
  • 1.22 (11)
  • 1.25 (6)
  • 1.2598 (128)
  • 1.26 (52)
  • 1.268 (1)
  • 1.286 (2)
  • 1.299 (4)
  • 1.2993 (2)
  • 1.3 (25)
  • 1.31 (1)
  • 1.312 (1)
  • 1.339 (4)
  • 1.375 (6)
  • 1.378 (14)
  • 1.4173 (8)
  • 1.42 (1)
  • 1.4567 (1)
  • 1.457 (3)
  • 1.47 (26)
  • 1.496 (2)
  • 1.4961 (3)
  • 1.5 (8)
  • 1.55 (2)
  • 1.56 (1)
  • 1.5748 (147)
  • 1.575 (68)
  • 1.58 (2)
  • 1.61 (1)
  • 1.614 (3)
  • 1.625 (1)
  • 1.626 (22)
  • 1.6535 (6)
  • 1.6929 (2)
  • 1.693 (1)
  • 1.705 (26)
  • 1.732 (13)
  • 1.7323 (7)
  • 1.75 (6)