Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Obróbka rowków

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (3507)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (3507)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (3507)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (3507)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (3507)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (3507)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (3507)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (3507)
  • M Stainless Steel (2812)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (2812)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (2812)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (2812)
  • K Cast Iron (3432)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (3432)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (3402)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (3385)
  • N Non-Ferrous Materials (3090)
    • N1
      Wrought Aluminum
      (3079)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (2760)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (387)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (3090)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (2771)
    • N6
      Carbon, Graphite Composites, CFRP
      (2760)
    • N7
      MMC's
      (376)
  • S High-Temp Alloys (3097)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (3097)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (3097)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (3097)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (3045)
  • H Hardened Materials (1746)
    • H1
      Hardened Materials 44-48 HRC
      (1746)
    • H2
      Hardened Materials 48-55 HRC
      (1389)
    • H3
      Hardened Materials 56-60 HRC
      (353)
    • H4
      Hardened Materials >60 HRC
      (353)
Select First Choice
  • CN (428)
  • DE (428)
  • GB (76)
  • IN (66)
  • US (553)
Applications
  • Back Boring Back Boring (2943)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (82)
  • Blind Hole Finishing Blind Hole Finishing (82)
  • Boring Boring (2415)
  • CRT Boring CRT Boring (82)
  • CRT Profiling CRT Profiling (82)
  • Chamfer Milling Chamfer Milling (39)
  • Chamfer Turning Chamfer Turning (369)
  • Cut-Off Cut-Off (3850)
  • Deep Grooving Deep Grooving (790)
  • Drilling Drilling (58)
  • Face Grooving Face Grooving (3846)
  • Face Milling Face Milling (58)
  • Facing Facing (3237)
  • Grooving Grooving (4008)
  • ID Facing ID Facing (3783)
  • ID Grooving ID Grooving (3800)
  • ID Thread Turning ID Thread Turning (3275)
  • Multiple Direction Cutting Multiple Direction Cutting (889)
  • OD Thread Turning OD Thread Turning (3275)
  • Plunge Turning Plunge Turning (3233)
  • Profiling Profiling (3585)
  • Shoulder Milling Shoulder Milling (39)
  • TRN Boring TRN Boring (864)
  • Threading Threading (532)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (82)
  • Through Hole Finishing Through Hole Finishing (82)
  • Turning Turning (3575)
Type of Thread
  • 60 (236)
  • ACME (174)
  • API (158)
  • API RD (123)
  • BSW (106)
  • BUTTRESS (231)
  • M (145)
  • NPT (108)
  • STUB ACME (106)
  • UN (231)
  • UNJ (106)
Cutting Condition
  • Heavily Interrupted Cut (2612)
  • Lightly Interrupted Cut (2844)
  • Smooth Cut (3498)
  • Varying Depth of Cut (3234)
Tool Cutting Edge Angle
  • 45.0 (14)
  • 90.0 (930)
  • 92.25 (32)
to
Cutting Edges Per Insert
  • 1.0 (1648)
  • 2.0 (3868)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.026 (56)
  • 0.051 (55)
  • 0.057 (51)
  • 0.066 (106)
  • 0.076 (236)
  • 0.08 (198)
  • 0.089 (304)
  • 0.09 (209)
  • 0.094 (106)
  • 0.097 (51)
  • 0.1 (179)
  • 0.102 (181)
  • 0.116 (55)
  • 0.117 (51)
  • 0.127 (108)
  • 0.131 (106)
  • 0.132 (106)
  • 0.133 (106)
  • 0.15 (138)
  • 0.155 (90)
  • 0.157 (106)
  • 0.16 (52)
  • 0.165 (158)
  • 0.173 (106)
  • 0.178 (106)
  • 0.18 (46)
  • 0.185 (103)
  • 0.19 (579)
  • 0.191 (1277)
  • 0.198 (106)
  • 0.2 (810)
  • 0.202 (145)
  • 0.203 (93)
  • 0.224 (106)
  • 0.235 (106)
  • 0.244 (55)
  • 0.25 (114)
  • 0.251 (106)
  • 0.254 (158)
  • 0.255 (56)
  • 0.269 (106)
  • 0.282 (106)
  • 0.284 (106)
  • 0.3 (191)
  • 0.315 (224)
  • 0.318 (272)
  • 0.33 (106)
  • 0.34 (108)
  • 0.343 (160)
  • 0.356 (106)
  • 0.38 (2)
  • 0.4 (766)
  • 0.404 (106)
  • 0.406 (123)
  • 0.43 (106)
  • 0.445 (158)
  • 0.472 (55)
  • 0.49 (106)
  • 0.5 (85)
  • 0.508 (118)
  • 0.565 (34)
  • 0.57 (62)
  • 0.572 (536)
  • 0.575 (136)
  • 0.75 (82)
  • 0.787 (259)
  • 0.79 (96)
  • 0.794 (80)
  • 0.8 (603)
  • 0.826 (44)
  • 0.84 (47)
  • 0.902 (158)
  • 1.0 (343)
  • 1.06 (166)
  • 1.122 (24)
  • 1.18 (26)
  • 1.19 (152)
  • 1.194 (253)
  • 1.195 (61)
  • 1.2 (198)
  • 1.21 (18)
  • 1.25 (193)
  • 1.5 (351)
  • 1.525 (64)
  • 1.56 (99)
  • 1.58 (5)
  • 1.585 (122)
  • 1.588 (382)
  • 1.59 (185)
  • 1.6 (1)
  • 1.65 (99)
  • 1.75 (193)
  • 1.98 (58)
  • 1.981 (132)
  • 2.0 (306)
  • 2.025 (56)
  • 2.06 (86)
  • 2.25 (169)
  • 2.37 (82)
  • 2.375 (1)
  • 2.38 (135)
  • 2.388 (227)
  • 2.39 (33)
  • 2.44 (86)
  • 2.5 (153)
  • 2.525 (44)
  • 2.56 (56)
  • 2.781 (4)
  • 3.0 (91)
  • 3.025 (51)
  • 3.06 (47)
  • 3.17 (46)
  • 3.175 (142)
  • 3.18 (75)
  • 3.24 (48)
  • 3.96 (30)
  • 3.962 (2)
  • 3.969 (24)
  • 3.97 (24)
  • 4.0 (52)
  • 4.025 (30)
  • 4.03 (31)
  • 4.06 (31)
  • 4.76 (18)
  • 4.763 (18)
  • 5.0 (20)
  • 5.025 (25)
to
Corner Radius
  • 0.002 (55)
  • 0.0023 (51)
  • 0.0026 (106)
  • 0.003 (236)
  • 0.0031 (198)
  • 0.0035 (385)
  • 0.0037 (106)
  • 0.0038 (51)
  • 0.004 (181)
  • 0.0046 (106)
  • 0.005 (212)
  • 0.0052 (106)
  • 0.0053 (106)
  • 0.0059 (106)
  • 0.006 (122)
  • 0.0062 (106)
  • 0.0065 (158)
  • 0.0068 (106)
  • 0.007 (106)
  • 0.0075 (1696)
  • 0.0078 (106)
  • 0.0079 (143)
  • 0.008 (844)
  • 0.0088 (106)
  • 0.0093 (106)
  • 0.0096 (55)
  • 0.0099 (106)
  • 0.01 (168)
  • 0.0106 (106)
  • 0.0111 (106)
  • 0.0112 (106)
  • 0.0118 (106)
  • 0.012 (85)
  • 0.0124 (106)
  • 0.0125 (366)
  • 0.013 (106)
  • 0.0135 (211)
  • 0.014 (108)
  • 0.015 (106)
  • 0.0156 (173)
  • 0.0157 (224)
  • 0.0158 (80)
  • 0.0159 (106)
  • 0.016 (843)
  • 0.017 (106)
  • 0.0175 (158)
  • 0.0186 (55)
  • 0.0193 (106)
  • 0.0197 (85)
  • 0.02 (118)
  • 0.0225 (586)
  • 0.0295 (82)
  • 0.031 (809)
  • 0.0312 (26)
  • 0.0313 (80)
  • 0.0315 (122)
  • 0.032 (317)
  • 0.0325 (44)
  • 0.033 (47)
  • 0.0355 (158)
  • 0.039 (147)
  • 0.0394 (196)
  • 0.042 (166)
  • 0.046 (26)
  • 0.047 (583)
  • 0.048 (42)
  • 0.0492 (193)
  • 0.059 (149)
  • 0.0591 (245)
  • 0.06 (64)
  • 0.062 (160)
  • 0.0625 (405)
  • 0.063 (151)
  • 0.065 (99)
  • 0.0689 (193)
  • 0.078 (139)
  • 0.0785 (53)
  • 0.0787 (173)
  • 0.079 (126)
  • 0.0797 (56)
  • 0.081 (86)
  • 0.0886 (169)
  • 0.093 (82)
  • 0.0935 (1)
  • 0.0937 (1)
  • 0.094 (366)
  • 0.096 (86)
  • 0.098 (87)
  • 0.0984 (93)
  • 0.0985 (31)
  • 0.0994 (44)
  • 0.101 (56)
  • 0.106 (51)
  • 0.1095 (4)
  • 0.115 (33)
  • 0.118 (85)
  • 0.1181 (46)
  • 0.1191 (51)
  • 0.121 (47)
  • 0.125 (207)
  • 0.127 (44)
  • 0.128 (43)
  • 0.155 (16)
  • 0.156 (56)
  • 0.1565 (24)
  • 0.157 (25)
  • 0.1575 (25)
  • 0.158 (43)
  • 0.1585 (30)
  • 0.159 (26)
  • 0.16 (31)
  • 0.1875 (18)
  • 0.188 (18)
  • 0.1969 (17)
  • 0.197 (18)
  • 0.1978 (25)
  • 0.787 (107)
to
application
Minimum Feed
Minimum Feed
Drilling Condition
  • Heavily Interrupted Cut (1663)
  • Lightly Interrupted Cut (1886)
  • Smooth Cut (2529)
  • Varying Depth of Cut (2265)
Grade Of Cutting Tool
  • K1 (6)
  • K1025 (111)
  • K2885 (197)
  • K313 (1045)
  • K420 (337)
  • K4H (142)
  • K68 (430)
  • KB1345 (166)
  • KB1630 (339)
  • KB5625 (261)
  • KC250 (186)
  • KC5010 (811)
  • KC5025 (954)
  • KC5410 (261)
  • KC710 (274)
  • KC720 (359)
  • KC722 (231)
  • KC730 (534)
  • KC732 (115)
  • KC810 (384)
  • KC850 (452)
  • KC910 (140)
  • KC9110 (600)
  • KC9120 (107)
  • KC9125 (291)
  • KC9320 (275)
  • KC935 (295)
  • KC950 (284)
  • KCK20 (361)
  • KCK20B (724)
  • KCM35B (344)
  • KCP10 (293)
  • KCP10B (795)
  • KCP25 (288)
  • KCP25B (822)
  • KCU10 (1362)
  • KCU25 (1483)
  • KD050 (57)
  • KD081 (116)
  • KD100 (143)
  • KD120 (169)
  • KD1405 (122)
  • KD1425 (110)
  • KMS (85)
  • KT175 (185)
  • KT315 (516)
  • KU10 (269)
  • KU10T (333)
  • KU25T (231)
  • KU30T (509)
  • KY1525 (6)
  • KY1540 (4)
  • KY2000 (8)
  • KY2100 (3)
  • KY3000 (163)
  • KY3500 (206)
  • KY4300 (11)
  • KYS30 (84)
  • SP88F8 (42)
Wiper Insert
  • N (5147)
Minimum Axial Groove Diameter
  • 0.0 (168)
  • 0.44 (2)
  • 0.453 (2)
  • 0.625 (4)
  • 0.63 (4)
  • 0.728 (2)
  • 0.73 (4)
  • 0.787 (12)
  • 0.8 (1)
  • 0.866 (2)
  • 0.8661 (2)
  • 0.984 (15)
  • 0.9843 (7)
  • 1.0 (6)
  • 1.0236 (1)
  • 1.024 (2)
  • 1.125 (4)
  • 1.25 (6)
  • 1.2598 (6)
  • 1.26 (11)
  • 1.339 (4)
  • 1.375 (6)
  • 1.5 (8)
  • 1.5748 (5)
  • 1.575 (6)
  • 1.626 (70)
  • 1.732 (2)
  • 1.7323 (6)
  • 1.75 (6)
  • 1.874 (65)
  • 1.9685 (2)
  • 2.0 (5)
  • 2.047 (5)
  • 2.0472 (7)
  • 2.126 (4)
  • 2.2 (4)
  • 2.229 (52)
  • 2.25 (11)
  • 2.252 (35)
  • 2.375 (4)
  • 2.5 (28)
  • 2.559 (1)
  • 2.75 (8)
  • 2.7559 (6)
  • 2.812 (1)
  • 2.875 (2)
  • 3.0 (12)
  • 3.25 (6)
  • 3.5 (573)
  • 3.5433 (4)
  • 3.937 (1)
  • 4.7244 (16)
  • 4.75 (2)
  • 5.0 (2)
  • 5.5 (844)
  • 5.75 (5)
  • 6.874 (142)
  • 8.252 (275)
  • 8.752 (72)
  • 13.11 (4)
to
Minimum Axial Groove Diameter
  • 0.0 (168)
  • 11.176 (1)
  • 11.18 (1)
  • 11.5 (2)
  • 15.88 (4)
  • 16.0 (4)
  • 18.5 (2)
  • 18.542 (4)
  • 20.0 (12)
  • 20.32 (1)
  • 22.0 (4)
  • 25.0 (22)
  • 25.4 (6)
  • 26.0 (3)
  • 28.575 (3)
  • 28.58 (1)
  • 31.75 (6)
  • 32.0 (17)
  • 34.0 (4)
  • 34.92 (2)
  • 34.925 (4)
  • 38.1 (8)
  • 40.0 (11)
  • 41.3 (70)
  • 44.0 (8)
  • 44.45 (6)
  • 47.6 (65)
  • 50.0 (2)
  • 50.8 (5)
  • 52.0 (12)
  • 54.0 (4)
  • 55.88 (4)
  • 56.625 (52)
  • 57.15 (11)
  • 57.2 (35)
  • 60.325 (4)
  • 63.5 (28)
  • 65.0 (1)
  • 69.85 (8)
  • 70.0 (6)
  • 71.425 (1)
  • 73.025 (2)
  • 76.2 (12)
  • 82.55 (6)
  • 88.9 (573)
  • 90.0 (4)
  • 100.0 (1)
  • 120.0 (16)
  • 120.65 (2)
  • 127.0 (2)
  • 139.7 (844)
  • 146.05 (5)
  • 174.6 (142)
  • 209.6 (275)
  • 222.3 (72)
  • 333.0 (4)
to
Maximum Axial Groove Diameter
  • 20.0 (28)
  • 26.0 (8)
  • 27.0 (23)
  • 28.0 (8)
  • 32.0 (40)
  • 34.0 (8)
  • 35.0 (13)
  • 42.0 (24)
  • 52.0 (24)
  • 62.0 (29)
  • 64.0 (11)
  • 66.0 (8)
  • 80.0 (4)
  • 82.0 (4)
  • 9999.0 (2076)
to
Maximum Axial Groove Diameter
  • 0.787 (28)
  • 1.024 (8)
  • 1.063 (23)
  • 1.102 (4)
  • 1.1024 (4)
  • 1.26 (40)
  • 1.3386 (4)
  • 1.339 (4)
  • 1.378 (13)
  • 1.654 (24)
  • 2.047 (21)
  • 2.0472 (3)
  • 2.441 (29)
  • 2.52 (11)
  • 2.5984 (8)
  • 3.1496 (4)
  • 3.228 (4)
  • 393.661 (2076)
to
Countersunk Angle
  • 20.0 (13)
  • 45.0 (26)
to
Maximum Bore Depth
  • 24.0 (4)
  • 25.4 (16)
  • 31.26 (1)
  • 31.3 (1)
  • 31.75 (6)
  • 32.0 (4)
  • 32.8 (1)
  • 38.1 (7)
  • 40.0 (16)
  • 40.28 (2)
  • 40.3 (2)
  • 48.0 (2)
  • 50.0 (9)
  • 50.3 (8)
  • 50.8 (42)
  • 63.4 (2)
  • 63.48 (1)
  • 63.5 (3)
  • 63.74 (1)
  • 64.0 (17)
  • 64.01 (1)
  • 76.2 (4)
  • 80.0 (14)
  • 95.25 (2)
  • 96.0 (2)
  • 100.0 (5)
  • 101.6 (6)
  • 114.3 (2)
  • 120.0 (1)
  • 127.0 (6)
  • 128.0 (2)
  • 152.4 (9)
  • 160.0 (4)
  • 177.8 (11)
  • 200.0 (2)
  • 203.2 (15)
  • 228.6 (2)
  • 254.0 (12)
to
Maximum Bore Depth
  • 0.945 (4)
  • 1.0 (16)
  • 1.231 (1)
  • 1.235 (1)
  • 1.25 (6)
  • 1.259 (2)
  • 1.26 (2)
  • 1.29 (1)
  • 1.5 (7)
  • 1.56 (1)
  • 1.564 (4)
  • 1.575 (11)
  • 1.586 (2)
  • 1.59 (2)
  • 1.88 (2)
  • 1.96 (1)
  • 1.969 (8)
  • 1.98 (8)
  • 2.0 (42)
  • 2.496 (2)
  • 2.5 (4)
  • 2.509 (3)
  • 2.519 (1)
  • 2.52 (15)
  • 3.0 (4)
  • 3.139 (4)
  • 3.15 (8)
  • 3.16 (2)
  • 3.75 (2)
  • 3.7758 (2)
  • 3.92 (2)
  • 3.936 (2)
  • 3.937 (1)
  • 4.0 (6)
  • 4.5 (2)
  • 4.7244 (1)
  • 5.0 (6)
  • 5.0392 (2)
  • 6.0 (9)
  • 6.2992 (4)
  • 7.0 (11)
  • 7.874 (2)
  • 8.0 (15)
  • 9.0 (2)
  • 10.0 (12)
to
frontEnd
Clamp Style
  • C (54)
  • N (260)
  • S (39)
  • Y (598)
Adapter Front-End
  • CARTRIDGE MOUNT (101)
  • SQUARE SHANK ADAPTER (78)
Insert Shape
  • PRISMATIC (1902)
  • TN-TOP NOTCH (3302)
Front End Type
  • MCS - Modular Cartridge System (112)
  • VKT - Square Shank (82)
Cutting Width
  • 0.5 (83)
  • 0.787 (144)
  • 0.8 (87)
  • 0.889 (78)
  • 0.991 (78)
  • 1.0 (228)
  • 1.041 (93)
  • 1.19 (150)
  • 1.194 (272)
  • 1.199 (40)
  • 1.2 (213)
  • 1.39