successfully added to cart
View Cart

Płytki Top Notch™ do obróbki rowków

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (558)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (558)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (558)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (558)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (558)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (558)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (558)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (558)
  • M Stainless Steel (503)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (503)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (503)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (503)
  • K Cast Iron (550)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (550)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (550)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (550)
  • N Non-Ferrous Materials (563)
    • N1
      Wrought Aluminum
      (563)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (508)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (254)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (563)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (508)
    • N6
      Carbon, Graphite Composites, CFRP
      (508)
    • N7
      MMC's
      (254)
  • S High-Temp Alloys (550)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (550)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (550)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (550)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (550)
  • H Hardened Materials (380)
    • H1
      Hardened Materials 44-48 HRC
      (380)
    • H2
      Hardened Materials 48-55 HRC
      (282)
    • H3
      Hardened Materials 56-60 HRC
      (146)
    • H4
      Hardened Materials >60 HRC
      (146)
Applications
  • Back Boring Back Boring (350)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (3)
  • Blind Hole Finishing Blind Hole Finishing (3)
  • Boring Boring (347)
  • CRT Boring CRT Boring (3)
  • CRT Profiling CRT Profiling (3)
  • Chamfer Milling Chamfer Milling (3)
  • Chamfer Turning Chamfer Turning (1)
  • Cut-Off Cut-Off (608)
  • Deep Grooving Deep Grooving (261)
  • Drilling Drilling (3)
  • Face Grooving Face Grooving (608)
  • Face Milling Face Milling (3)
  • Facing Facing (350)
  • Grooving Grooving (608)
  • ID Facing ID Facing (608)
  • ID Grooving ID Grooving (608)
  • ID Thread Turning ID Thread Turning (605)
  • Multiple Direction Cutting Multiple Direction Cutting (260)
  • OD Thread Turning OD Thread Turning (605)
  • Plunge Turning Plunge Turning (348)
  • Profiling Profiling (608)
  • Shoulder Milling Shoulder Milling (3)
  • TRN Boring TRN Boring (261)
  • Threading Threading (261)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (3)
  • Through Hole Finishing Through Hole Finishing (3)
  • Turning Turning (605)
Type of Thread
  • 60 (236)
  • ACME (174)
  • API (158)
  • API RD (123)
  • BSW (106)
  • BUTTRESS (231)
  • M (145)
  • NPT (108)
  • STUB ACME (106)
  • UN (231)
  • UNJ (106)
Cutting Condition
  • Heavily Interrupted Cut (460)
  • Lightly Interrupted Cut (467)
  • Smooth Cut (537)
  • Varying Depth of Cut (510)
Tool Cutting Edge Angle
  • 45.0 (14)
  • 90.0 (248)
to
Cutting Edges Per Insert
  • 1.0 (277)
  • 2.0 (763)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.026 (55)
  • 0.051 (55)
  • 0.057 (51)
  • 0.066 (106)
  • 0.076 (236)
  • 0.08 (179)
  • 0.089 (128)
  • 0.09 (128)
  • 0.094 (106)
  • 0.097 (51)
  • 0.1 (179)
  • 0.102 (181)
  • 0.116 (55)
  • 0.117 (51)
  • 0.127 (108)
  • 0.131 (106)
  • 0.132 (106)
  • 0.133 (106)
  • 0.15 (106)
  • 0.155 (90)
  • 0.157 (106)
  • 0.16 (52)
  • 0.165 (158)
  • 0.173 (106)
  • 0.178 (106)
  • 0.18 (39)
  • 0.185 (39)
  • 0.19 (231)
  • 0.191 (236)
  • 0.198 (106)
  • 0.2 (106)
  • 0.202 (145)
  • 0.224 (106)
  • 0.235 (106)
  • 0.244 (55)
  • 0.25 (106)
  • 0.251 (106)
  • 0.254 (158)
  • 0.255 (55)
  • 0.269 (106)
  • 0.282 (106)
  • 0.284 (106)
  • 0.3 (106)
  • 0.315 (130)
  • 0.318 (165)
  • 0.33 (106)
  • 0.34 (106)
  • 0.343 (146)
  • 0.356 (106)
  • 0.404 (106)
  • 0.406 (123)
  • 0.43 (106)
  • 0.445 (158)
  • 0.472 (55)
  • 0.49 (106)
  • 0.5 (85)
  • 0.508 (106)
  • 0.565 (24)
  • 0.57 (51)
  • 0.572 (165)
  • 0.575 (107)
  • 0.75 (82)
  • 0.787 (259)
  • 0.826 (23)
  • 0.902 (158)
  • 1.0 (196)
  • 1.194 (239)
  • 1.195 (61)
  • 1.25 (193)
  • 1.5 (195)
  • 1.585 (122)
  • 1.588 (334)
  • 1.59 (31)
  • 1.75 (193)
  • 1.98 (58)
  • 1.981 (132)
  • 2.0 (173)
  • 2.25 (169)
  • 2.388 (227)
  • 2.39 (33)
  • 2.5 (58)
  • 3.175 (102)
  • 3.18 (31)
to
Corner Radius
  • 0.002 (55)
  • 0.0023 (51)
  • 0.0026 (106)
  • 0.003 (236)
  • 0.0031 (179)
  • 0.0035 (128)
  • 0.0037 (106)
  • 0.0038 (51)
  • 0.004 (181)
  • 0.0046 (106)
  • 0.005 (108)
  • 0.0052 (106)
  • 0.0053 (106)
  • 0.0059 (106)
  • 0.006 (90)
  • 0.0062 (106)
  • 0.0065 (158)
  • 0.0068 (106)
  • 0.007 (106)
  • 0.0075 (236)
  • 0.0078 (106)
  • 0.0079 (48)
  • 0.008 (145)
  • 0.0088 (106)
  • 0.0093 (106)
  • 0.0096 (55)
  • 0.0099 (106)
  • 0.01 (158)
  • 0.0106 (106)
  • 0.0111 (106)
  • 0.0112 (106)
  • 0.0118 (106)
  • 0.0124 (106)
  • 0.0125 (165)
  • 0.013 (106)
  • 0.0135 (197)
  • 0.014 (106)
  • 0.0159 (106)
  • 0.016 (123)
  • 0.017 (106)
  • 0.0175 (158)
  • 0.0186 (55)
  • 0.0193 (106)
  • 0.0197 (85)
  • 0.02 (106)
  • 0.0225 (165)
  • 0.0295 (82)
  • 0.031 (259)
  • 0.0325 (23)
  • 0.0355 (158)
  • 0.0394 (196)
  • 0.047 (249)
  • 0.0492 (193)
  • 0.0591 (195)
  • 0.0625 (357)
  • 0.0689 (193)
  • 0.078 (139)
  • 0.0787 (173)
  • 0.0886 (169)
  • 0.094 (232)
  • 0.0984 (58)
  • 0.106 (51)
  • 0.125 (109)
to
application
Minimum Feed
Minimum Feed
Drilling Condition
  • Heavily Interrupted Cut (201)
  • Lightly Interrupted Cut (208)
  • Smooth Cut (278)
  • Varying Depth of Cut (251)
Grade Of Cutting Tool
  • K1 (5)
  • K2885 (179)
  • K313 (246)
  • K420 (270)
  • K4H (140)
  • K68 (299)
  • KB1345 (158)
  • KB1630 (146)
  • KB5625 (106)
  • KC250 (184)
  • KC5010 (329)
  • KC5025 (326)
  • KC5410 (244)
  • KC710 (231)
  • KC720 (244)
  • KC722 (231)
  • KC730 (312)
  • KC732 (110)
  • KC810 (275)
  • KC850 (303)
  • KC910 (140)
  • KC9110 (256)
  • KC9120 (106)
  • KC9320 (258)
  • KC935 (240)
  • KC950 (241)
  • KCK20 (181)
  • KCK20B (219)
  • KCP10B (223)
  • KCP25B (209)
  • KCU10 (299)
  • KCU25 (291)
  • KD050 (55)
  • KD081 (106)
  • KD100 (130)
  • KD120 (158)
  • KD1425 (99)
  • KT175 (179)
  • KT315 (239)
  • KU10T (243)
  • KU25T (231)
  • KU30T (243)
  • KY3000 (158)
Wiper Insert
  • N (812)
Minimum Axial Groove Diameter
  • 0.0 (100)
  • 0.44 (2)
  • 0.453 (2)
  • 0.728 (2)
  • 0.73 (4)
  • 0.8 (1)
  • 0.866 (2)
  • 0.8661 (2)
  • 1.0 (4)
  • 1.0236 (1)
  • 1.024 (2)
  • 1.125 (4)
  • 1.339 (4)
  • 1.375 (6)
  • 1.5 (4)
  • 1.626 (48)
  • 1.7323 (2)
  • 1.75 (6)
  • 1.874 (48)
  • 1.9685 (2)
  • 2.0 (5)
  • 2.126 (4)
  • 2.2 (4)
  • 2.229 (30)
  • 2.25 (11)
  • 2.252 (21)
  • 2.375 (4)
  • 2.5 (28)
  • 2.75 (8)
  • 2.7559 (2)
  • 2.812 (1)
  • 2.875 (2)
  • 3.0 (12)
  • 3.25 (6)
  • 3.5 (129)
  • 3.937 (1)
  • 4.75 (2)
  • 5.0 (2)
  • 5.5 (243)
  • 5.75 (5)
  • 6.874 (48)
  • 8.252 (113)
  • 8.752 (21)
  • 13.11 (3)
to
Minimum Axial Groove Diameter
  • 0.0 (100)
  • 11.176 (1)
  • 11.18 (1)
  • 11.5 (2)
  • 18.5 (2)
  • 18.542 (4)
  • 20.32 (1)
  • 22.0 (4)
  • 25.4 (4)
  • 26.0 (3)
  • 28.575 (3)
  • 28.58 (1)
  • 34.0 (4)
  • 34.92 (2)
  • 34.925 (4)
  • 38.1 (4)
  • 41.3 (48)
  • 44.0 (2)
  • 44.45 (6)
  • 47.6 (48)
  • 50.0 (2)
  • 50.8 (5)
  • 54.0 (4)
  • 55.88 (4)
  • 56.625 (30)
  • 57.15 (11)
  • 57.2 (21)
  • 60.325 (4)
  • 63.5 (28)
  • 69.85 (8)
  • 70.0 (2)
  • 71.425 (1)
  • 73.025 (2)
  • 76.2 (12)
  • 82.55 (6)
  • 88.9 (129)
  • 100.0 (1)
  • 120.65 (2)
  • 127.0 (2)
  • 139.7 (243)
  • 146.05 (5)
  • 174.6 (48)
  • 209.6 (113)
  • 222.3 (21)
  • 333.0 (3)
to
Maximum Axial Groove Diameter
  • 9999.0 (580)
to
Maximum Axial Groove Diameter
  • 393.661 (580)
to
Maximum Bore Depth
  • 25.4 (12)
  • 31.26 (1)
  • 31.3 (1)
  • 32.8 (1)
  • 38.1 (1)
  • 48.0 (2)
  • 50.8 (35)
  • 63.48 (1)
  • 63.5 (2)
  • 64.0 (2)
  • 76.2 (4)
  • 80.0 (2)
  • 95.25 (2)
  • 96.0 (2)
  • 100.0 (4)
  • 101.6 (6)
  • 114.3 (2)
  • 120.0 (1)
  • 127.0 (6)
  • 128.0 (2)
  • 152.4 (9)
  • 160.0 (4)
  • 177.8 (11)
  • 200.0 (2)
  • 203.2 (15)
  • 228.6 (2)
  • 254.0 (12)
to
Maximum Bore Depth
  • 1.0 (12)
  • 1.231 (1)
  • 1.235 (1)
  • 1.29 (1)
  • 1.5 (1)
  • 1.88 (2)
  • 2.0 (35)
  • 2.5 (3)
  • 2.52 (2)
  • 3.0 (4)
  • 3.16 (2)
  • 3.75 (2)
  • 3.7758 (2)
  • 3.92 (2)
  • 3.936 (2)
  • 4.0 (6)
  • 4.5 (2)
  • 4.7244 (1)
  • 5.0 (6)
  • 5.0392 (2)
  • 6.0 (9)
  • 6.2992 (4)
  • 7.0 (11)
  • 7.874 (2)
  • 8.0 (15)
  • 9.0 (2)
  • 10.0 (12)
to
frontEnd
Clamp Style
  • N (260)
  • S (1)
Insert Shape
  • TN-TOP NOTCH (816)
Cutting Width
  • 0.5 (73)
  • 0.787 (78)
  • 0.8 (73)
  • 0.889 (73)
  • 0.991 (73)
  • 1.0 (191)
  • 1.041 (73)
  • 1.19 (124)
  • 1.194 (184)
  • 1.199 (39)
  • 1.2 (179)
  • 1.39 (73)
  • 1.397 (73)
  • 1.4 (73)
  • 1.473 (73)
  • 1.5 (188)
  • 1.56 (39)
  • 1.57 (146)
  • 1.575 (258)
  • 1.69 (73)
  • 1.7 (73)
  • 1.702 (73)
  • 1.75 (179)
  • 1.829 (106)
  • 1.94 (73)
  • 1.95 (73)
  • 1.956 (73)
  • 1.981 (106)
  • 2.0 (196)
  • 2.007 (73)
  • 2.2 (179)
  • 2.235 (179)
  • 2.24 (128)
  • 2.25 (124)
  • 2.388 (244)
  • 2.39 (61)
  • 2.464 (106)
  • 2.5 (193)
  • 2.667 (106)
  • 2.74 (73)
  • 2.743 (179)
  • 2.75 (179)
  • 2.794 (106)
  • 2.997 (179)
  • 3.0 (247)
  • 3.099 (106)
  • 3.17 (122)
  • 3.175 (334)
  • 3.18 (65)
  • 3.2 (231)
  • 3.245 (73)
  • 3.25 (106)
  • 3.251 (179)
  • 3.27 (73)
  • 3.32 (55)
  • 3.329 (55)
  • 3.5 (245)
  • 3.607 (106)
  • 3.73 (39)
  • 3.81 (70)
  • 3.84 (68)
  • 3.96 (113)
  • 3.962 (124)
  • 3.974 (63)
  • 3.988 (106)
  • 4.0 (173)
  • 4.24 (51)
  • 4.242 (154)
  • 4.25 (55)
  • 4.3 (106)
  • 4.5 (169)
  • 4.521 (106)
  • 4.699 (134)
  • 4.775 (214)
  • 4.78 (33)
  • 4.785 (34)
  • 4.788 (31)
  • 4.8 (106)
  • 4.801 (158)
  • 4.81 (106)
  • 4.88 (55)
  • 4.95 (90)
  • 5.0 (58)
  • 5.004 (59)
  • 5.131 (52)
  • 5.41 (52)
  • 5.5 (52)
  • 5.537 (16)
  • 5.563 (52)
  • 6.0 (59)
  • 6.35 (125)
  • 6.36 (31)
  • 6.48 (40)
  • 7.01 (7)
  • 7.137 (23)
  • 7.925 (23)
  • 8.001 (5)
  • 8.738 (7)
  • 8.992 (7)
  • 9.525 (23)
  • 9.65 (7)
  • 9.73 (11)
to
Cutting Width
  • 0.0197 (73)
  • 0.031 (78)
  • 0.0315 (73)
  • 0.035 (73)
  • 0.039 (73)
  • 0.0394 (191)
  • 0.041 (73)
  • 0.047 (184)
  • 0.0472 (179)
  • 0.055 (73)
  • 0.0551 (73)
  • 0.058 (73)
  • 0.0591 (188)
  • 0.062 (264)
  • 0.0669 (73)
  • 0.067 (73)
  • 0.0689 (179)
  • 0.072 (106)
  • 0.076 (73)
  • 0.0768 (73)
  • 0.077 (73)
  • 0.078 (106)
  • 0.0787 (196)
  • 0.079 (121)
  • 0.0866 (179)
  • 0.088 (179)
  • 0.0886 (124)
  • 0.094 (254)
  • 0.097 (106)
  • 0.0984 (193)
  • 0.105 (106)
  • 0.108 (179)
  • 0.1083 (179)
  • 0.11 (106)
  • 0.118 (179)
  • 0.1181 (247)
  • 0.122 (106)
  • 0.125 (357)
  • 0.126 (231)
  • 0.1278 (73)
  • 0.128 (179)
  • 0.129 (73)
  • 0.131 (55)
  • 0.1378 (245)
  • 0.142 (106)
  • 0.147 (39)
  • 0.15 (70)
  • 0.151 (68)
  • 0.156 (139)
  • 0.157 (106)
  • 0.1574 (173)
  • 0.1575 (158)
  • 0.167 (154)
  • 0.1673 (55)
  • 0.169 (106)
  • 0.1771 (169)
  • 0.1772 (158)
  • 0.178 (106)
  • 0.185 (134)
  • 0.188 (232)
  • 0.189 (158)
  • 0.192 (55)
  • 0.195 (90)
  • 0.1969 (58)
  • 0.197 (59)
  • 0.202 (52)
  • 0.213 (52)
  • 0.2165 (52)
  • 0.2166 (24)
  • 0.218 (16)
  • 0.219 (52)
  • 0.2362 (59)
  • 0.25 (132)
  • 0.255 (40)
  • 0.276 (7)
  • 0.281 (23)
  • 0.312 (23)
  • 0.315 (5)
  • 0.344 (7)
  • 0.354 (7)
  • 0.375 (23)
  • 0.38 (7)
  • 0.383 (11)
to
Maximum Cutting Depth
  • 1.016 (1)
  • 1.6 (2)
  • 1.69 (1)
  • 1.78 (2)
  • 1.9 (1)
  • 3.3 (1)
  • 3.505 (24)
  • 3.51 (19)
  • 5.33 (18)
  • 5.334 (32)
  • 5.715 (1)
  • 6.35 (3)
  • 7.46 (9)
  • 7.468 (16)
  • 7.47 (7)
  • 7.62 (2)
  • 8.484 (6)
  • 10.54 (4)
  • 10.541 (2)
to
Maximum Cutting Depth
  • 0.04 (1)
  • 0.063 (2)
  • 0.067 (1)
  • 0.07 (2)
  • 0.075 (1)
  • 0.13 (1)
  • 0.138 (42)
  • 0.1382 (1)
  • 0.21 (50)
  • 0.225 (1)
  • 0.25 (3)
  • 0.294 (32)
  • 0.3 (2)
  • 0.334 (6)