Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Obróbka kształtowa Top Notch™

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (507)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (507)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (507)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (507)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (507)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (507)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (507)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (507)
  • M Stainless Steel (370)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (370)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (370)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (370)
  • K Cast Iron (451)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (451)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (451)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (451)
  • N Non-Ferrous Materials (414)
    • N1
      Wrought Aluminum
      (398)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (343)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (130)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (414)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (359)
    • N6
      Carbon, Graphite Composites, CFRP
      (343)
    • N7
      MMC's
      (1)
  • S High-Temp Alloys (386)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (386)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (386)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (386)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (386)
  • H Hardened Materials (247)
    • H1
      Hardened Materials 44-48 HRC
      (247)
    • H2
      Hardened Materials 48-55 HRC
      (194)
    • H3
      Hardened Materials 56-60 HRC
      (1)
    • H4
      Hardened Materials >60 HRC
      (1)
Applications
  • Back Boring Back Boring (7)
  • Cut-Off Cut-Off (7)
  • Deep Grooving Deep Grooving (7)
  • Face Grooving Face Grooving (92)
  • Facing Facing (7)
  • Grooving Grooving (7)
  • ID Facing ID Facing (7)
  • ID Grooving ID Grooving (7)
  • ID Thread Turning ID Thread Turning (940)
  • Multiple Direction Cutting Multiple Direction Cutting (138)
  • OD Thread Turning OD Thread Turning (7)
  • Profiling Profiling (7)
  • TRN Boring TRN Boring (7)
  • Threading Threading (7)
  • Turning Turning (7)
Cutting Condition
  • Heavily Interrupted Cut (1)
  • Lightly Interrupted Cut (1)
  • Smooth Cut (1)
  • Varying Depth of Cut (1)
Tool Cutting Edge Angle
  • 62.5 (5)
  • 72.5 (5)
  • 93.0 (1)
  • 95.0 (114)
  • 100.0 (1)
  • 107.5 (19)
  • 117.5 (9)
to
Cutting Edges Per Insert
  • 1.0 (1)
  • 2.0 (1074)
  • 4.0 (1)
  • 8.0 (1)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.1 (1)
  • 0.13 (140)
  • 0.2 (224)
  • 0.203 (40)
  • 0.396 (19)
  • 0.397 (166)
  • 0.4 (325)
  • 0.5 (156)
  • 0.794 (234)
  • 0.795 (12)
  • 0.8 (325)
  • 1.0 (119)
  • 1.191 (51)
  • 1.2 (81)
  • 1.5 (2)
  • 1.588 (43)
  • 1.6 (51)
to
Corner Radius
  • 0.004 (1)
  • 0.005 (140)
  • 0.008 (225)
  • 0.0156 (392)
  • 0.016 (17)
  • 0.0197 (156)
  • 0.031 (1)
  • 0.0312 (234)
  • 0.0313 (332)
  • 0.0394 (119)
  • 0.0469 (93)
  • 0.0591 (2)
  • 0.0625 (56)
to
application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (1)
  • CM2 (1)
  • K090 (1)
  • K10M (1)
  • K10P (1)
  • K10U (1)
  • K15U (1)
  • K20K (1)
  • K25M (1)
  • K25P (1)
  • K313 (139)
  • K420 (85)
  • K45 (1)
  • K6 (9)
  • K68 (163)
  • KB1345 (34)
  • KB1610 (1)
  • KB1625 (1)
  • KB1630 (1)
  • KB5610 (1)
  • KB5625 (1)
  • KB5630 (1)
  • KB9610 (1)
  • KBH10 (1)
  • KBH10B (1)
  • KBH20 (1)
  • KBH20B (1)
  • KC250 (104)
  • KC5010 (190)
  • KC5025 (175)
  • KC5410 (126)
  • KC5510 (1)
  • KC720 (42)
  • KC730 (150)
  • KC7310 (124)
  • KC732 (133)
  • KC8050 (192)
  • KC810 (186)
  • KC850 (181)
  • KC9010 (1)
  • KC9025 (140)
  • KC910 (137)
  • KC9105 (86)
  • KC9110 (183)
  • KC9120 (56)
  • KC9125 (186)
  • KC9140 (1)
  • KC9215 (1)
  • KC9225 (171)
  • KC9240 (1)
  • KC9240NEW (1)
  • KC9245 (1)
  • KC9315 (124)
  • KC9320 (1)
  • KC9325 (1)
  • KC935 (163)
  • KC950 (145)
  • KC990 (1)
  • KCD25 (39)
  • KCK05 (61)
  • KCK05B (1)
  • KCK15 (1)
  • KCK15B (42)
  • KCK20 (1)
  • KCK20B (1)
  • KCM15 (1)
  • KCM15B (77)
  • KCM25 (142)
  • KCM25B (6)
  • KCM35 (1)
  • KCP05 (130)
  • KCP05B (1)
  • KCP10 (143)
  • KCP10B (80)
  • KCP25 (144)
  • KCP25B (81)
  • KCP30 (1)
  • KCPK05 (1)
  • KCS10B (43)
  • KCU10 (194)
  • KCU25 (183)
  • KD050 (108)
  • KD081 (40)
  • KD100 (146)
  • KD120 (113)
  • KD1400 (1)
  • KD1405 (1)
  • KD1425 (130)
  • KT1120 (1)
  • KT125 (111)
  • KT150 (121)
  • KT175 (69)
  • KT315 (176)
  • KU10 (1)
  • KU10T (1)
  • KU30T (1)
  • KY1320 (1)
  • KY1615 (1)
  • KY3000 (1)
  • KY3500 (1)
  • KY4000 (1)
  • KY4400 (1)
  • KYK35 (1)
  • NL250 (1)
  • SP4036 (1)
  • SP4093 (1)
Wiper Insert
  • N (1074)
Minimum Axial Groove Diameter
  • 0.6299 (2)
  • 0.63 (2)
  • 0.66 (2)
  • 0.67 (2)
  • 0.75 (1)
  • 0.787 (2)
  • 0.7874 (1)
  • 0.866 (1)
  • 0.9 (4)
  • 0.98 (6)
  • 0.984 (4)
  • 0.9843 (1)
  • 1.06 (2)
  • 1.2598 (1)
  • 1.26 (3)
  • 1.3 (5)
  • 1.5748 (4)
  • 1.575 (1)
  • 1.58 (2)
  • 1.705 (1)
  • 1.774 (1)
  • 1.83 (2)
  • 1.87 (2)
  • 1.9685 (3)
  • 2.0 (2)
  • 2.12 (3)
  • 2.37 (2)
  • 2.4803 (2)
  • 2.5 (1)
  • 2.62 (2)
  • 3.125 (2)
to
Minimum Axial Groove Diameter
  • 16.0 (4)
  • 16.764 (2)
  • 17.018 (2)
  • 19.05 (1)
  • 20.0 (3)
  • 22.0 (1)
  • 22.86 (4)
  • 24.89 (4)
  • 24.892 (2)
  • 25.0 (5)
  • 26.92 (2)
  • 32.0 (4)
  • 33.02 (5)
  • 40.0 (5)
  • 40.13 (1)
  • 40.132 (1)
  • 43.307 (1)
  • 45.06 (1)
  • 46.48 (2)
  • 47.498 (2)
  • 50.0 (3)
  • 50.8 (2)
  • 53.848 (3)
  • 60.198 (2)
  • 63.0 (2)
  • 63.5 (1)
  • 66.548 (2)
  • 79.375 (2)
to
Maximum Bore Depth
  • 48.0 (2)
  • 50.8 (2)
  • 63.5 (2)
  • 64.0 (3)
  • 72.0 (2)
  • 76.2 (9)
  • 80.0 (3)
  • 80.264 (1)
  • 95.25 (2)
  • 96.0 (1)
  • 100.0 (3)
  • 101.6 (5)
  • 114.3 (2)
  • 120.0 (1)
  • 125.0 (1)
  • 126.8 (3)
  • 127.0 (3)
  • 128.0 (5)
  • 152.4 (6)
  • 160.0 (3)
  • 177.8 (1)
  • 200.0 (2)
  • 203.2 (5)
  • 254.0 (2)
to
Maximum Bore Depth
  • 1.88 (2)
  • 2.0 (2)
  • 2.5 (2)
  • 2.52 (3)
  • 2.832 (2)
  • 3.0 (9)
  • 3.16 (4)
  • 3.75 (2)
  • 3.7758 (1)
  • 3.92 (3)
  • 4.0 (5)
  • 4.5 (2)
  • 4.7244 (1)
  • 4.9215 (1)
  • 5.0 (6)
  • 5.0392 (2)
  • 5.04 (3)
  • 6.0 (6)
  • 6.296 (1)
  • 6.2992 (2)
  • 7.0 (1)
  • 7.874 (1)
  • 7.88 (1)
  • 8.0 (5)
  • 10.0 (2)
to
frontEnd
Clamp Style
  • N (154)
Insert Shape
  • D-DIAMOND/RHOMBIC 55 (92)
  • K-PARALLELOGRAM 55 (13)
  • N/K-PARALLELOGRAM 55 (684)
  • V-DIAMOND/RHOMBIC 35 (290)
Maximum Cutting Depth
  • 2.953 (2)
  • 3.08 (1)
  • 4.7 (1)
  • 6.2 (1)
to
Maximum Cutting Depth
  • 0.1162 (2)
  • 0.1212 (1)
  • 0.185 (1)
  • 0.244 (1)
to
insertGeometry
Shape
  • D-DIAMOND/RHOMBIC 55 (78)
  • K-PARALLELOGRAM 55 (9)
  • N/K-PARALLELOGRAM 55 (613)
  • V-DIAMOND/RHOMBIC 35 (237)
Insert IC Size
  • 0.25 (41)
  • 0.375 (196)
  • 0.5 (78)
to
Insert IC Size
  • 6.35 (41)
  • 9.52 (82)
  • 9.525 (114)
  • 12.7 (78)
to
Cutting Edge Length
  • 0.435 (4)
  • 0.4359 (28)
  • 0.436 (9)
  • 0.4566 (262)
  • 0.457 (10)
  • 0.458 (10)
  • 0.608 (210)
  • 0.61 (19)
  • 0.6104 (59)
  • 0.6538 (114)
  • 0.654 (80)
  • 0.655 (1)
  • 0.6654 (1)
  • 0.6894 (9)
  • 0.8948 (9)
  • 0.8949 (75)
to
Cutting Edge Length
  • 11.04 (4)
  • 11.07 (9)
  • 11.071 (28)
  • 11.597 (262)
  • 11.6 (10)
  • 11.63 (10)
  • 15.442 (210)
  • 15.5 (19)
  • 15.504 (59)
  • 16.606 (114)
  • 16.61 (81)
  • 16.65 (1)
  • 17.51 (9)
  • 22.729 (9)
  • 22.731 (75)
to
Cutting Tool Material
  • B H (114)
  • B L (109)
  • C A (1)
  • C N (1)
  • D P (162)
  • H T (199)
  • H W (957)
Chip Breaker CBMD
  • 08 (84)
  • 1 (6)
  • 15 (252)
  • 2 (3)
  • 20 (121)
  • 25 (97)
  • 32 (39)
  • FP (97)
  • HP (4)
Tolerance Class
  • G (713)
  • M (73)
  • U (151)
backEnd
Back-End Diameter
  • 0.47 (2)
  • 0.472 (2)
  • 0.5 (5)
  • 0.625 (4)
  • 0.6293 (1)
  • 0.63 (3)
  • 0.75 (8)
  • 0.7874 (1)
  • 0.79 (4)
  • 0.98 (3)
  • 0.9843 (1)
  • 1.0 (5)
  • 1.25 (6)
  • 1.2598 (2)
  • 1.26 (3)
  • 1.5 (6)
  • 1.574 (1)
  • 1.5748 (2)
  • 1.75 (1)
  • 1.9685 (1)
  • 1.97 (1)
  • 2.0 (5)
  • 2.5 (2)
to
Back-End Diameter
  • 12.0 (4)
  • 12.7 (5)
  • 15.875 (4)
  • 16.0 (4)
  • 19.05 (8)
  • 20.0 (4)
  • 20.066 (1)
  • 25.0 (4)
  • 25.4 (5)
  • 31.7 (3)
  • 31.75 (3)
  • 32.0 (5)
  • 38.1 (6)
  • 40.0 (3)
  • 44.45 (1)
  • 50.0 (2)
  • 50.8 (5)
  • 63.5 (2)
to
other
Grade
  • K313 (16)
  • K420 (11)
  • K6 (3)
  • K68 (38)
  • KB1345 (1)
  • KC250 (4)
  • KC5010 (53)
  • KC5025 (38)
  • KC5410 (12)
  • KC720 (3)
  • KC730 (27)
  • KC7310 (10)
  • KC732 (10)
  • KC8050 (55)
  • KC810 (49)
  • KC850 (44)
  • KC9025 (17)
  • KC910 (25)
  • KC9105 (5)
  • KC9110 (46)
  • KC9120 (4)
  • KC9125 (49)
  • KC9225 (35)
  • KC9315 (14)
  • KC935 (38)
  • KC950 (21)
  • KCD25 (1)
  • KCK05 (9)
  • KCK15B (3)
  • KCM15B (5)
  • KCM25 (16)
  • KCM25B (5)
  • KCP05 (4)
  • KCP10 (17)
  • KCP10B (3)
  • KCP25 (18)
  • KCP25B (4)
  • KCS10B (4)
  • KCU10 (57)
  • KCU25 (46)
  • KD050 (7)
  • KD081 (1)
  • KD100 (23)
  • KD120 (7)
  • KD1425 (16)
  • KT125 (10)
  • KT150 (7)
  • KT175 (6)
  • KT315 (39)
  • KU10 (1)
  • KWH (12)
Platform
  • Top Notch (361)
Tool Unit
  • I (1025)
  • M (1003)
Over All Length [L]
  • 19.05 (6)
  • 80.0 (2)
  • 88.9 (3)
  • 100.0 (6)
  • 101.6 (2)
  • 114.3 (11)
  • 125.0 (12)
  • 127.0 (8)
  • 150.0 (18)
  • 152.4 (20)
  • 160.0 (2)
  • 170.0 (3)
  • 177.8 (2)
  • 180.0 (2)
  • 184.45 (2)
  • 200.0 (3)
  • 203.2 (2)
  • 204.591 (1)
  • 206.553 (2)
  • 207.01 (1)
  • 250.0 (8)
  • 254.0 (8)
  • 255.588 (1)
  • 255.59 (1)
  • 256.389 (2)
  • 300.0 (5)
  • 304.8 (5)
  • 350.0 (2)
  • 355.6 (8)
  • 357.38 (2)
  • 406.4 (4)
to
Over All Length [L]
  • 0.75 (6)
  • 3.149 (2)
  • 3.5 (3)
  • 3.937 (6)
  • 4.0 (2)
  • 4.5 (11)
  • 4.921 (8)
  • 4.9213 (4)
  • 5.0 (8)
  • 5.905 (1)
  • 5.9055 (8)
  • 5.906 (9)
  • 6.0 (20)
  • 6.2992 (2)
  • 6.6929 (3)
  • 7.0 (2)
  • 7.087 (2)
  • 7.2618 (2)
  • 7.874 (3)
  • 8.0 (2)
  • 8.0548 (1)
  • 8.132 (2)
  • 8.15 (1)
  • 9.8425 (5)
  • 9.843 (3)
  • 10.0 (8)
  • 10.062 (1)
  • 10.0625 (1)
  • 10.094 (2)
  • 11.811 (5)
  • 12.0 (5)
  • 13.7795 (1)
  • 13.78 (1)
  • 14.0 (8)
  • 14.07 (2)
  • 16.0 (4)
to
Insert Hand
  • L (339)
  • N (379)
  • R (361)
Cutting Condition Material
  • H-All (1)
  • K-All (1)
  • M-All (1)
  • N-All (1)
  • P-All (1)
  • S-All (1)
  • S4 (1)
Maximum Depth of Cut
Maximum Depth of Cut
Category Path
No filters matching ""
Narrow by category:
View Products in
Metric
Inch
Top Notch™ Profiling

Boring Bars
(6 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [CS] Coolant Supply Size [GAAP] Axial Rake Angle Gage Insert Clamp Screw ID Drive Size
1095918 A08NKQCL05 A08NKQCL05 12.7 .5 17.0180 .6700 9.5250 .3750 203.2000 8.000 1/16-27 NPT 0.000 NP..51R 3/32
    1095915 A08NKQCR05 A08NKQCR05 12.7 .5 17.0180 .6700 9.5250 .3750 203.2000 8.000 1/16-27 NPT 0.000 NP..51L 3/32
      1095919 A12SNKQCL05 A12SNKQCL05 19.05 .75 24.8900 .9800 14.2700 .5620 254.0000 10.000 1/8-27 NPT 0.000 NP..51R 1/8
        1095916 A12SNKQCR05 A12SNKQCR05 19.05 .75 24.8900 .9800 14.2700 .5620 254.0000 10.000 1/8-27 NPT 0.000 NP..51L 1/8
          1095920 A16NKQCL05 A16NKQCL05 25.4 1.0 33.0200 1.300 18.9230 .7450 304.8000 12.000 1/4-18 NPT 0.000 NP..51R 1/8
            1095917 A16NKQCR05 A16NKQCR05 25.4 1.0 33.0200 1.300 18.9230 .7450 304.8000 12.000 1/4-18 NPT 0.000 NP..51L 1/8
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Top Notch™ Profiling

              Boring Bars
              (13 Products)
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [CS] Coolant Supply Size [GAAP] Axial Rake Angle Gage Insert Clamp Screw ID Drive Size
              1095908 A10SNKLCL05 A10SNKLCL05 15.875 .625 22.8600 .9000 12.5730 .4950 255.5880 10.062 1/8-27 NPT 0.000 NP..51R 1/8
                1095901 A10SNKLCR05 A10SNKLCR05 15.875 .625 22.8600 .9000 12.5700 .4950 255.5900 10.062 1/8-27 NPT 0.000 NP..51L 1/8
                  1095909 A12SNKLCL05 A12SNKLCL05 19.05 .75 24.8900 .9800 14.2700 .5620 254.0000 10.000 1/8-27 NPT 0.000 NP..51R 1/8
                    1095902 A12SNKLCR05 A12SNKLCR05 19.05 .75 24.8900 .9800 14.2700 .5620 254.0000 10.000 1/8-27 NPT 0.000 NP..51L 1/8
                      1095910 A16TNKLCL05 A16TNKLCL05 25.4 1.0 33.0200 1.300 19.0500 .7500 304.8000 12.000 1/4-18 NPT 0.000 NP..51R 1/8
                        1095903 A16TNKLCR05 A16TNKLCR05 25.4 1.0 33.0200 1.300 19.0500 .7500 304.8000 12.000 1/4-18 NPT 0.000 NP..51L 1/8
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Obróbka kształtowa Top Notch™

                          Wytaczaki
                          (9 Products)
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [A] Coolant Hole Diameter [A] Coolant Hole Dia [CS] Coolant Supply Size [GAAP] Axial Rake Angle Gage Insert Clamp Screw ID Drive Size
                          1098960 A12MNKLCL11 A12MNKLCL11 12.0 .47 16.0000 .6300 9.0000 .3540 150.0000 5.906 4.0000 .1600 1/16-27 NPT 0.000 KC..110305R 2.5 mm
                            1098959 A12MNKLCR11 A12MNKLCR11 12.0 .47 16.0000 .6300 9.0000 .3540 150.0000 5.906 4.0000 .1600 1/16-27 NPT 0.000 KC..110305L15 2.5 mm
                              1098962 A16MNKLCL11 A16MNKLCL11 16.0 .63 20.0000 .7870 11.0000 .4330 150.0000 5.906 4.0000 .1600 1/8-27 NPT 0.000 KC..110305R 2.5 mm
                                1098961 A16MNKLCR11 A16MNKLCR11 16.0 .63 20.0000 .7870 11.0000 .4330 150.0000 5.906 4.0000 .1600 1/8-27 NPT 0.000 KC..110305L 2.5 mm
                                  1098990 A20QNKLCL11 A20QNKLCL11 20.0 .79 25.0000 .9840 13.0000 .5120 180.0000 7.087 4.0000 .1600 1/8-27 NPT 0.000 KC..110305R 3 mm
                                    1098989 A20QNKLCR11 A20QNKLCR11 20.0 .79 25.0000 .9840 13.0000 .5120 180.0000 7.087 4.0000 .1600 1/8-27 NPT 0.000 KC..110305L 3 mm
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor
                                      Top Notch™ Profiling

                                      Boring Bars
                                      (3 Products)
                                      View Products
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L] Overall Length [L] Overall Length [CS] Coolant Supply Size [GAAP] Axial Rake Angle Gage Insert Clamp Screw ID Drive Size
                                      1095923 A12NKXCL05 A12NKXCL05 19.05 .75 26.9200 1.060 15.8800 .6250 254.0000 10.000 296.9400 10.628 1/8-27 NPT 0.000 NPL..51 1/8