successfully added to cart
View Cart

Solid End Mills

Browse Solid End Mill Clearance Center Items

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (183)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (132)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (132)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (134)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (168)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (179)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (111)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (76)
  • M Stainless Steel (160)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (160)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (157)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (103)
  • K Cast Iron (136)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (136)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (133)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (79)
  • N Non-Ferrous Materials (61)
    • N1
      Wrought Aluminum
      (59)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (59)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (52)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (54)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (6)
    • N6
      Carbon, Graphite Composites, CFRP
      (1)
    • N7
      MMC's
      (1)
  • S High-Temp Alloys (86)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (86)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (85)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (84)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (85)
  • H Hardened Materials (109)
    • H1
      Hardened Materials 44-48 HRC
      (109)
    • H2
      Hardened Materials 48-55 HRC
      (34)
    • H3
      Hardened Materials 56-60 HRC
      (23)
    • H4
      Hardened Materials >60 HRC
      (19)
Applications
  • Chamfer Milling Chamfer Milling (352)
  • Concave Radius Milling Concave Radius Milling (9)
  • Countersinking Countersinking (126)
  • Drilling Drilling (352)
  • Face Milling Face Milling (345)
  • Flat Bottom Drilling Flat Bottom Drilling (379)
  • Pipe Thread Pipe Thread (379)
  • Pocket Pocket (381)
  • Pocket Helical Pocket Helical (381)
  • Pocket Milling Pocket Milling (381)
  • Pocket Plunge Milling Pocket Plunge Milling (352)
  • Profile Milling Profile Milling (352)
  • Ramping Ramping (382)
  • Shoulder Ball Nose Shoulder Ball Nose (352)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (352)
  • Shoulder Milling Shoulder Milling (354)
  • Shoulder Roughing Shoulder Roughing (352)
  • Shoulder Square End Shoulder Square End (338)
  • Slot Ball Nose Slot Ball Nose (352)
  • Slot Milling Slot Milling (353)
  • Slot Side Slot Side (352)
  • Slot Square End Slot Square End (353)
  • Slot T Slot T (352)
  • Thread Milling Thread Milling (352)
  • Threading Threading (382)
  • Trochoidal Milling Trochoidal Milling (9)
Cutting Diameter
  • 0.397 (2)
  • 0.4 (1)
  • 0.5 (1)
  • 0.794 (2)
  • 1.2 (1)
  • 1.588 (3)
  • 1.6 (1)
  • 1.8 (1)
  • 1.984 (6)
  • 2.0 (4)
  • 2.381 (5)
  • 2.778 (1)
  • 2.779 (1)
  • 3.0 (7)
  • 3.175 (12)
  • 3.18 (3)
  • 3.572 (1)
  • 3.8 (1)
  • 3.96 (1)
  • 3.969 (7)
  • 4.0 (7)
  • 4.366 (2)
  • 4.5 (4)
  • 4.763 (13)
  • 4.78 (1)
  • 4.8 (1)
  • 5.0 (5)
  • 5.5 (1)
  • 5.556 (5)
  • 5.75 (1)
  • 6.0 (9)
  • 6.35 (13)
  • 6.5 (1)
  • 7.0 (2)
  • 7.144 (2)
  • 7.938 (13)
  • 8.0 (12)
  • 8.334 (1)
  • 9.0 (1)
  • 9.128 (1)
  • 9.525 (30)
  • 9.53 (1)
  • 9.7 (1)
  • 10.0 (16)
  • 10.319 (1)
  • 11.0 (2)
  • 11.112 (1)
  • 11.113 (7)
  • 11.906 (3)
  • 12.0 (12)
  • 12.7 (29)
  • 13.0 (1)
  • 14.0 (6)
  • 14.288 (5)
  • 15.7 (1)
  • 15.875 (19)
  • 16.0 (13)
  • 17.7 (1)
  • 18.0 (5)
  • 19.05 (26)
  • 20.0 (10)
  • 22.225 (6)
  • 25.0 (1)
  • 25.4 (29)
  • 32.0 (2)
  • 60.2 (1)
to
Cutting Diameter
  • 0.0156 (2)
  • 0.0157 (1)
  • 0.0197 (1)
  • 0.0313 (2)
  • 0.0472 (1)
  • 0.0625 (3)
  • 0.063 (1)
  • 0.0709 (1)
  • 0.0781 (6)
  • 0.0787 (4)
  • 0.0938 (5)
  • 0.1094 (2)
  • 0.1181 (7)
  • 0.125 (15)
  • 0.1406 (1)
  • 0.1496 (1)
  • 0.156 (1)
  • 0.1562 (2)
  • 0.1563 (5)
  • 0.1575 (7)
  • 0.1719 (2)
  • 0.1772 (4)
  • 0.1875 (13)
  • 0.188 (1)
  • 0.189 (1)
  • 0.1969 (5)
  • 0.2165 (1)
  • 0.2188 (5)
  • 0.2264 (1)
  • 0.2362 (9)
  • 0.25 (13)
  • 0.2559 (1)
  • 0.2756 (2)
  • 0.2812 (1)
  • 0.2813 (1)
  • 0.3125 (13)
  • 0.315 (12)
  • 0.3281 (1)
  • 0.3543 (1)
  • 0.3594 (1)
  • 0.375 (31)
  • 0.3819 (1)
  • 0.3937 (16)
  • 0.4062 (1)
  • 0.4331 (2)
  • 0.4375 (8)
  • 0.4688 (3)
  • 0.4724 (12)
  • 0.5 (29)
  • 0.5118 (1)
  • 0.5512 (6)
  • 0.5625 (5)
  • 0.6181 (1)
  • 0.625 (19)
  • 0.6299 (7)
  • 0.63 (6)
  • 0.6969 (1)
  • 0.7087 (5)
  • 0.75 (26)
  • 0.7874 (10)
  • 0.875 (6)
  • 0.9843 (1)
  • 1.0 (29)
  • 1.2598 (1)
  • 1.26 (1)
  • 2.37 (1)
to
Cutting Length
  • 0.0276 (1)
  • 0.0312 (1)
  • 0.0313 (1)
  • 0.0315 (1)
  • 0.0709 (2)
  • 0.0781 (2)
  • 0.0945 (1)
  • 0.1181 (3)
  • 0.12 (1)
  • 0.125 (3)
  • 0.156 (1)
  • 0.1563 (1)
  • 0.1575 (5)
  • 0.1875 (6)
  • 0.1969 (7)
  • 0.2 (1)
  • 0.2362 (3)
  • 0.25 (4)
  • 0.2656 (2)
  • 0.275 (1)
  • 0.2756 (2)
  • 0.2969 (1)
  • 0.3125 (4)
  • 0.315 (2)
  • 0.3281 (1)
  • 0.3543 (4)
  • 0.375 (11)
  • 0.3937 (6)
  • 0.433 (3)
  • 0.4331 (1)
  • 0.4375 (3)
  • 0.4724 (6)
  • 0.5 (14)
  • 0.5118 (5)
  • 0.5512 (1)
  • 0.5625 (10)
  • 0.5906 (4)
  • 0.625 (21)
  • 0.6299 (15)
  • 0.7087 (6)
  • 0.709 (1)
  • 0.748 (2)
  • 0.75 (24)
  • 0.7874 (4)
  • 0.8125 (4)
  • 0.825 (1)
  • 0.8661 (8)
  • 0.875 (6)
  • 0.9449 (2)
  • 0.9843 (3)
  • 1.0 (20)
  • 1.0236 (5)
  • 1.031 (1)
  • 1.1 (4)
  • 1.1024 (1)
  • 1.125 (10)
  • 1.1811 (1)
  • 1.25 (16)
  • 1.2598 (9)
  • 1.417 (1)
  • 1.4764 (1)
  • 1.4961 (4)
  • 1.5 (24)
  • 1.5748 (2)
  • 1.625 (2)
  • 1.65 (2)
  • 1.75 (5)
  • 1.8898 (1)
  • 1.9685 (1)
  • 2.0 (13)
  • 2.125 (1)
  • 2.2 (2)
  • 2.2047 (2)
  • 2.25 (13)
  • 2.3622 (1)
  • 2.5 (1)
  • 2.9528 (4)
  • 3.0 (7)
  • 3.25 (3)
  • 4.0 (6)
to
Cutting Length
  • 0.7 (1)
  • 0.794 (2)
  • 0.8 (1)
  • 1.8 (2)
  • 1.984 (2)
  • 2.4 (1)
  • 3.0 (3)
  • 3.048 (1)
  • 3.175 (3)
  • 3.96 (1)
  • 3.969 (1)
  • 4.0 (5)
  • 4.762 (1)
  • 4.763 (5)
  • 5.0 (8)
  • 6.0 (3)
  • 6.35 (4)
  • 6.747 (1)
  • 6.75 (1)
  • 6.985 (1)
  • 7.0 (2)
  • 7.541 (1)
  • 7.938 (4)
  • 8.0 (2)
  • 8.334 (1)
  • 9.0 (4)
  • 9.52 (2)
  • 9.525 (9)
  • 10.0 (6)
  • 11.0 (4)
  • 11.112 (1)
  • 11.113 (2)
  • 12.0 (6)
  • 12.7 (14)
  • 13.0 (5)
  • 14.0 (1)
  • 14.288 (9)
  • 14.29 (1)
  • 15.0 (4)
  • 15.875 (20)
  • 15.88 (1)
  • 16.0 (15)
  • 18.0 (7)
  • 19.0 (4)
  • 19.05 (22)
  • 20.0 (4)
  • 20.638 (4)
  • 20.955 (1)
  • 22.0 (8)
  • 22.225 (6)
  • 24.0 (2)
  • 25.0 (3)
  • 25.4 (20)
  • 26.0 (5)
  • 26.187 (1)
  • 27.94 (4)
  • 28.0 (1)
  • 28.575 (10)
  • 30.0 (1)
  • 31.75 (16)
  • 32.0 (9)
  • 36.0 (1)
  • 37.5 (1)
  • 38.0 (4)
  • 38.1 (24)
  • 40.0 (2)
  • 41.275 (2)
  • 41.91 (2)
  • 44.45 (5)
  • 48.0 (1)
  • 50.0 (1)
  • 50.8 (13)
  • 53.98 (1)
  • 55.88 (2)
  • 56.0 (2)
  • 57.15 (13)
  • 60.0 (1)
  • 63.5 (1)
  • 75.0 (4)
  • 76.2 (7)
  • 82.55 (3)
  • 101.6 (6)
to
Reach
  • 0.8 (1)
  • 2.3 (1)
  • 2.5 (1)
  • 3.0 (3)
  • 3.175 (2)
  • 3.801 (1)
  • 4.0 (3)
  • 4.5 (1)
  • 4.763 (2)
  • 5.0 (4)
  • 6.35 (3)
  • 6.449 (1)
  • 7.0 (1)
  • 7.938 (3)
  • 8.0 (1)
  • 8.334 (1)
  • 9.0 (2)
  • 9.52 (2)
  • 9.525 (6)
  • 11.0 (2)
  • 11.113 (2)
  • 11.886 (1)
  • 12.0 (4)
  • 12.549 (1)
  • 12.7 (10)
  • 13.0 (1)
  • 13.097 (1)
  • 14.288 (8)
  • 15.0 (2)
  • 15.875 (13)
  • 15.88 (1)
  • 16.0 (11)
  • 17.5 (1)
  • 18.0 (8)
  • 18.336 (1)
  • 18.5 (1)
  • 18.899 (1)
  • 18.931 (1)
  • 18.94 (1)
  • 19.0 (3)
  • 19.05 (15)
  • 19.447 (1)
  • 19.5 (2)
  • 19.761 (1)
  • 20.0 (3)
  • 20.638 (2)
  • 21.0 (1)
  • 21.55 (1)
  • 22.0 (7)
  • 22.225 (6)
  • 22.5 (1)
  • 24.0 (6)
  • 25.0 (3)
  • 25.4 (13)
  • 26.0 (4)
  • 27.0 (3)
  • 28.575 (6)
  • 30.0 (2)
  • 31.242 (1)
  • 31.75 (13)
  • 32.0 (4)
  • 33.496 (1)
  • 34.0 (1)
  • 35.848 (1)
  • 36.0 (5)
  • 38.0 (1)
  • 38.1 (22)
  • 40.0 (3)
  • 40.64 (1)
  • 41.275 (2)
  • 42.0 (2)
  • 42.9 (2)
  • 44.45 (3)
  • 47.6 (1)
  • 47.625 (3)
  • 48.0 (2)
  • 50.0 (1)
  • 50.8 (10)
  • 52.761 (2)
  • 53.98 (1)
  • 54.0 (4)
  • 57.15 (10)
  • 57.2 (2)
  • 58.0 (3)
  • 60.0 (4)
  • 63.5 (1)
  • 71.7 (1)
  • 75.0 (1)
  • 76.2 (9)
  • 79.375 (1)
  • 82.55 (4)
  • 95.25 (2)
  • 98.0 (1)
  • 101.6 (3)
  • 111.125 (1)
to
Reach
  • 0.0315 (1)
  • 0.0906 (1)
  • 0.0984 (1)
  • 0.1181 (3)
  • 0.125 (2)
  • 0.1496 (1)
  • 0.1575 (3)
  • 0.1772 (1)
  • 0.1875 (2)
  • 0.1969 (4)
  • 0.25 (3)
  • 0.2539 (1)
  • 0.2756 (1)
  • 0.3125 (3)
  • 0.315 (1)
  • 0.3281 (1)
  • 0.3543 (2)
  • 0.375 (8)
  • 0.433 (1)
  • 0.4337 (1)
  • 0.4375 (2)
  • 0.468 (1)
  • 0.4724 (4)
  • 0.4941 (1)
  • 0.5 (10)
  • 0.5118 (1)
  • 0.5156 (1)
  • 0.5625 (8)
  • 0.5906 (2)
  • 0.625 (14)
  • 0.6299 (11)
  • 0.689 (1)
  • 0.7087 (7)
  • 0.709 (1)
  • 0.7219 (1)
  • 0.7283 (1)
  • 0.7441 (1)
  • 0.7453 (1)
  • 0.7457 (1)
  • 0.748 (1)
  • 0.75 (17)
  • 0.7656 (1)
  • 0.7677 (2)
  • 0.778 (1)
  • 0.787 (1)
  • 0.7874 (2)
  • 0.8125 (2)
  • 0.8268 (1)
  • 0.8484 (1)
  • 0.866 (3)
  • 0.8661 (4)
  • 0.875 (6)
  • 0.8858 (1)
  • 0.9449 (6)
  • 0.984 (2)
  • 0.9843 (1)
  • 1.0 (13)
  • 1.0236 (4)
  • 1.063 (3)
  • 1.125 (6)
  • 1.1811 (2)
  • 1.23 (1)
  • 1.25 (13)
  • 1.2598 (3)
  • 1.26 (1)
  • 1.3187 (1)
  • 1.3386 (1)
  • 1.4113 (1)
  • 1.417 (1)
  • 1.4173 (4)
  • 1.4961 (1)
  • 1.5 (22)
  • 1.5748 (2)
  • 1.575 (1)
  • 1.6 (1)
  • 1.625 (2)
  • 1.6535 (2)
  • 1.689 (2)
  • 1.75 (3)
  • 1.874 (1)
  • 1.875 (3)
  • 1.8898 (2)
  • 1.969 (1)
  • 2.0 (10)
  • 2.0772 (2)
  • 2.125 (1)
  • 2.126 (4)
  • 2.25 (10)
  • 2.252 (2)
  • 2.2835 (3)
  • 2.3622 (4)
  • 2.5 (1)
  • 2.8228 (1)
  • 2.9528 (1)
  • 3.0 (9)
  • 3.125 (1)
  • 3.25 (4)
  • 3.75 (2)
  • 3.8583 (1)
  • 4.0 (3)
  • 4.375 (1)
to
Tool Cutting Edge Angle
  • 90.0 (383)
to
Connection Style
  • A-Socket Head Cap Screw (1)
  • DUO-LOCK (11)
  • SAFE-LOCK (3)
  • Screw-On Connection (1)
  • Straight-Cylindrical (285)
  • Weldon (84)
Cutting Edges Per Insert
  • 2.0 (2)
to
Internal Coolant Capability
Corner configuration
Corner Style
  • BALL NOSE (35)
  • CHAMFER (102)
  • RADIUS (98)
  • SQUARE END (136)
  • TORUS (11)
Corner Radius
  • 0.0 (239)
  • 0.12 (1)
  • 0.2 (1)
  • 0.25 (3)
  • 0.254 (4)
  • 0.3 (1)
  • 0.33 (1)
  • 0.381 (11)
  • 0.4 (1)
  • 0.45 (5)
  • 0.457 (1)
  • 0.5 (6)
  • 0.508 (3)
  • 0.75 (1)
  • 0.762 (16)
  • 0.9 (1)
  • 0.993 (1)
  • 1.0 (9)
  • 1.016 (1)
  • 1.143 (2)
  • 1.5 (4)
  • 1.524 (13)
  • 1.588 (2)
  • 1.984 (1)
  • 2.0 (4)
  • 2.286 (7)
  • 2.3 (1)
  • 2.383 (1)
  • 2.5 (2)
  • 2.779 (1)
  • 3.0 (2)
  • 3.048 (8)
  • 3.05 (2)
  • 3.175 (1)
  • 4.0 (2)
  • 4.762 (1)
  • 4.763 (3)
  • 5.0 (6)
  • 6.0 (3)
  • 6.35 (1)
  • 7.938 (2)
  • 8.0 (4)
  • 9.525 (3)
  • 10.0 (1)
  • 12.7 (2)
to
Corner Radius
  • 0.0 (239)
  • 0.0047 (1)
  • 0.0079 (1)
  • 0.0098 (3)
  • 0.01 (4)
  • 0.0118 (1)
  • 0.013 (1)
  • 0.015 (11)
  • 0.0157 (1)
  • 0.0177 (5)
  • 0.018 (1)
  • 0.0197 (6)
  • 0.02 (3)
  • 0.0295 (1)
  • 0.03 (16)
  • 0.0354 (1)
  • 0.0391 (1)
  • 0.0394 (9)
  • 0.04 (1)
  • 0.045 (2)
  • 0.0591 (4)
  • 0.06 (13)
  • 0.0625 (2)
  • 0.0781 (1)
  • 0.0787 (3)
  • 0.0788 (1)
  • 0.09 (8)
  • 0.0938 (1)
  • 0.0984 (1)
  • 0.0985 (1)
  • 0.1094 (1)
  • 0.1181 (2)
  • 0.12 (10)
  • 0.125 (1)
  • 0.1575 (2)
  • 0.1875 (4)
  • 0.1969 (6)
  • 0.2362 (3)
  • 0.25 (1)
  • 0.3125 (2)
  • 0.315 (4)
  • 0.375 (3)
  • 0.3937 (1)
  • 0.5 (2)
to