successfully added to cart
View Cart

Turning

Browse Turning & Inserts Clearance Center Items

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (727)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (725)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (725)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (725)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (726)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (726)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (726)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (726)
  • M Stainless Steel (445)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (445)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (445)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (445)
  • K Cast Iron (509)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (500)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (505)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (496)
  • N Non-Ferrous Materials (208)
    • N1
      Wrought Aluminum
      (193)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (190)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (76)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (206)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (190)
    • N6
      Carbon, Graphite Composites, CFRP
      (170)
    • N7
      MMC's
      (112)
  • S High-Temp Alloys (437)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (435)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (437)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (436)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (304)
  • H Hardened Materials (144)
    • H1
      Hardened Materials 44-48 HRC
      (144)
    • H2
      Hardened Materials 48-55 HRC
      (137)
    • H3
      Hardened Materials 56-60 HRC
      (114)
    • H4
      Hardened Materials >60 HRC
      (82)
Applications
  • Back Boring Back Boring (80)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (30)
  • Blind Hole Finishing Blind Hole Finishing (30)
  • Boring Boring (44)
  • CRT Boring CRT Boring (30)
  • CRT Profiling CRT Profiling (30)
  • Chamfer Milling Chamfer Milling (30)
  • Chamfer Turning Chamfer Turning (64)
  • Cut-Off Cut-Off (124)
  • Deep Grooving Deep Grooving (71)
  • Drilling Drilling (30)
  • Face Grooving Face Grooving (117)
  • Face Milling Face Milling (30)
  • Facing Facing (111)
  • Grooving Grooving (123)
  • ID Facing ID Facing (117)
  • ID Grooving ID Grooving (117)
  • ID Thread Turning ID Thread Turning (1081)
  • Multiple Direction Cutting Multiple Direction Cutting (215)
  • OD Thread Turning OD Thread Turning (85)
  • Plunge Turning Plunge Turning (110)
  • Profiling Profiling (184)
  • Shoulder Milling Shoulder Milling (30)
  • TRN Boring TRN Boring (76)
  • Threading Threading (71)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (30)
  • Through Hole Finishing Through Hole Finishing (30)
  • Turning Turning (150)
Type of Thread
  • 55 (1)
  • 60 (5)
  • ACME (5)
  • API (3)
  • API RD (3)
  • BSPT (1)
  • BSW (2)
  • BUTTRESS (3)
  • M (2)
  • NPT (2)
  • NPTF (1)
  • STUB ACME (1)
  • UN (4)
  • UNJ (2)
Cutting Condition
  • Heavily Interrupted Cut (330)
  • Interrupted (55)
  • Lightly Interrupted Cut (386)
  • Smooth Cut (598)
  • Varying Depth of Cut (374)
Tool Cutting Edge Angle
  • 45.0 (10)
  • 50.0 (2)
  • 60.0 (6)
  • 62.5 (1)
  • 63.0 (1)
  • 75.0 (21)
  • 85.0 (1)
  • 90.0 (118)
  • 92.0 (3)
  • 93.0 (17)
  • 95.0 (43)
  • 97.0 (1)
  • 107.5 (3)
to
Connection Style
  • Bolt-On Head (14)
  • Boring Bar Shank (47)
  • Cutoff Support Blade A1-A3 (5)
  • KM (8)
  • Notch Clamp15 Positioning Slot (2)
  • Toolholder (113)
  • WHISTLE NOTCH 5° A/B BoringBar (1)
Cutting Edges Per Insert
  • 0.0 (1)
  • 1.0 (148)
  • 2.0 (306)
  • 3.0 (105)
  • 4.0 (329)
  • 6.0 (182)
  • 8.0 (288)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 0.0 (3)
  • 0.026 (1)
  • 0.03 (3)
  • 0.038 (13)
  • 0.05 (7)
  • 0.051 (8)
  • 0.066 (1)
  • 0.076 (3)
  • 0.08 (1)
  • 0.089 (1)
  • 0.09 (2)
  • 0.094 (1)
  • 0.1 (64)
  • 0.102 (10)
  • 0.116 (1)
  • 0.127 (4)
  • 0.13 (4)
  • 0.131 (1)
  • 0.132 (1)
  • 0.133 (1)
  • 0.15 (3)
  • 0.155 (1)
  • 0.157 (1)
  • 0.16 (2)
  • 0.165 (3)
  • 0.173 (1)
  • 0.177 (1)
  • 0.178 (6)
  • 0.18 (9)
  • 0.19 (11)
  • 0.191 (16)
  • 0.198 (1)
  • 0.2 (129)
  • 0.202 (1)
  • 0.203 (32)
  • 0.22 (1)
  • 0.224 (1)
  • 0.235 (1)
  • 0.244 (1)
  • 0.25 (2)
  • 0.251 (1)
  • 0.254 (3)
  • 0.255 (1)
  • 0.269 (1)
  • 0.282 (1)
  • 0.284 (1)
  • 0.3 (45)
  • 0.315 (5)
  • 0.318 (4)
  • 0.33 (1)
  • 0.34 (2)
  • 0.343 (3)
  • 0.356 (1)
  • 0.38 (9)
  • 0.381 (5)
  • 0.394 (2)
  • 0.396 (3)
  • 0.397 (79)
  • 0.4 (307)
  • 0.404 (1)
  • 0.406 (14)
  • 0.43 (1)
  • 0.445 (3)
  • 0.472 (1)
  • 0.49 (1)
  • 0.5 (14)
  • 0.508 (1)
  • 0.565 (2)
  • 0.572 (7)
  • 0.575 (3)
  • 0.6 (1)
  • 0.75 (2)
  • 0.76 (1)
  • 0.787 (3)
  • 0.79 (9)
  • 0.792 (5)
  • 0.793 (1)
  • 0.794 (95)
  • 0.795 (3)
  • 0.8 (405)
  • 0.826 (2)
  • 0.84 (2)
  • 0.902 (3)
  • 1.0 (12)
  • 1.06 (3)
  • 1.188 (6)
  • 1.19 (6)
  • 1.191 (76)
  • 1.194 (2)
  • 1.2 (296)
  • 1.25 (1)
  • 1.5 (5)
  • 1.525 (2)
  • 1.585 (1)
  • 1.587 (4)
  • 1.588 (44)
  • 1.59 (3)
  • 1.6 (167)
  • 1.75 (1)
  • 1.98 (1)
  • 1.981 (2)
  • 2.0 (5)
  • 2.025 (2)
  • 2.25 (3)
  • 2.38 (7)
  • 2.381 (3)
  • 2.388 (4)
  • 2.39 (1)
  • 2.4 (56)
  • 2.5 (3)
  • 2.525 (1)
  • 3.175 (6)
  • 3.18 (5)
  • 3.2 (20)
  • 3.969 (1)
  • 4.0 (12)
  • 4.001 (1)
  • 4.76 (1)
  • 4.7625 (7)
  • 4.763 (1)
  • 5.0 (3)
  • 6.0 (5)
  • 6.35 (11)
  • 7.9375 (3)
  • 7.94 (2)
  • 8.0 (1)
  • 9.525 (5)
  • 10.0 (3)
  • 12.5 (5)
  • 16.0 (4)
to
Corner Radius
  • 0.0 (3)
  • 0.001 (2)
  • 0.0011 (1)
  • 0.0015 (13)
  • 0.002 (10)
  • 0.0026 (1)
  • 0.003 (3)
  • 0.0031 (1)
  • 0.0035 (2)
  • 0.0037 (1)
  • 0.004 (66)
  • 0.0046 (1)
  • 0.005 (8)
  • 0.0052 (1)
  • 0.0053 (1)
  • 0.0059 (2)
  • 0.006 (3)
  • 0.0062 (1)
  • 0.0065 (3)
  • 0.0068 (1)
  • 0.007 (10)
  • 0.0075 (23)
  • 0.0078 (1)
  • 0.0079 (2)
  • 0.008 (130)
  • 0.0083 (4)
  • 0.0088 (1)
  • 0.009 (1)
  • 0.0093 (1)
  • 0.0096 (1)
  • 0.0099 (1)
  • 0.01 (4)
  • 0.0106 (1)
  • 0.0111 (1)
  • 0.0112 (1)
  • 0.0118 (4)
  • 0.012 (41)
  • 0.0124 (1)
  • 0.0125 (7)
  • 0.013 (2)
  • 0.0135 (3)
  • 0.014 (1)
  • 0.015 (13)
  • 0.0155 (2)
  • 0.0156 (252)
  • 0.0157 (2)
  • 0.0159 (1)
  • 0.016 (115)
  • 0.017 (1)
  • 0.0175 (3)
  • 0.0186 (1)
  • 0.0193 (1)
  • 0.0197 (14)
  • 0.02 (1)
  • 0.0225 (8)
  • 0.03 (3)
  • 0.031 (80)
  • 0.0312 (75)
  • 0.0313 (380)
  • 0.0315 (7)
  • 0.032 (4)
  • 0.0325 (2)
  • 0.033 (2)
  • 0.0355 (3)
  • 0.039 (5)
  • 0.0394 (7)
  • 0.042 (3)
  • 0.0468 (6)
  • 0.0469 (285)
  • 0.047 (86)
  • 0.0472 (1)
  • 0.048 (1)
  • 0.0487 (1)
  • 0.0492 (1)
  • 0.059 (1)
  • 0.0591 (5)
  • 0.06 (2)
  • 0.062 (2)
  • 0.0625 (165)
  • 0.063 (53)
  • 0.0689 (1)
  • 0.078 (3)
  • 0.0785 (2)
  • 0.0787 (3)
  • 0.079 (2)
  • 0.0797 (2)
  • 0.0886 (3)
  • 0.0928 (2)
  • 0.0938 (47)
  • 0.094 (22)
  • 0.0945 (2)
  • 0.098 (1)
  • 0.0984 (3)
  • 0.0985 (1)
  • 0.0994 (1)
  • 0.125 (18)
  • 0.126 (10)
  • 0.1563 (4)
  • 0.1565 (1)
  • 0.1575 (13)
  • 0.1875 (8)
  • 0.1969 (2)
  • 0.197 (1)
  • 0.236 (1)
  • 0.2362 (4)
  • 0.25 (11)
  • 0.312 (2)
  • 0.3125 (5)
  • 0.315 (1)
  • 0.375 (5)
  • 0.3935 (1)
  • 0.3937 (2)
  • 0.4688 (1)
  • 0.492 (3)
  • 0.4922 (2)
  • 0.6299 (3)
  • 0.63 (1)
to
Corner Chamfer
  • 0.02 (2)
to
Corner Chamfer
  • 0.5 (2)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
  • Heavily Interrupted Cut (170)
  • Interrupted (11)
  • Lightly Interrupted Cut (219)
  • Smooth Cut (427)
  • Varying Depth of Cut (207)
Grade Of Cutting Tool
  • 13E (39)
  • 241 (4)
  • AC5 (4)
  • ALO (1)
  • C25 (1)
  • CG4 (4)
  • CG5 (3)
  • CG6 (3)
  • CL4 (27)
  • CM1 (3)
  • CM2 (36)
  • CM3 (41)
  • CM4 (26)
  • CM5 (6)
  • CPX (36)
  • CW2 (12)
  • CW2015 (1)
  • CW5025 (1)
  • GH1 (6)
  • GH2 (2)
  • GX (27)
  • HK1500 (2)
  • HT2 (23)
  • HTX (25)
  • K00379 (6)
  • K060 (24)
  • K090 (56)
  • K1 (22)
  • K1010P (2)
  • K1025 (2)
  • K10M (79)
  • K10P (74)
  • K10U (53)
  • K11 (3)
  • K110M (1)
  • K15U (54)
  • K20K (81)
  • K21 (37)
  • K25M (59)
  • K25P (58)
  • K2884 (1)
  • K2885 (7)
  • K313 (123)
  • K35P (33)
  • K420 (64)
  • K45 (30)
  • K4H (1)
  • K6 (8)
  • K68 (108)
  • K8735 (4)
  • KB1340 (15)
  • KB1345 (27)
  • KB1610 (42)
  • KB1625 (31)
  • KB1630 (37)
  • KB5610 (32)
  • KB5625 (50)
  • KB5630 (17)
  • KB9610 (44)
  • KB9640 (18)
  • KBH10 (34)
  • KBH10B (15)
  • KBH20 (46)
  • KBH20B (15)
  • KBK35 (8)
  • KC210 (31)
  • KC250 (46)
  • KC5010 (141)
  • KC5020P (6)
  • KC5025 (166)
  • KC5125RR (1)
  • KC525M (1)
  • KC5410 (85)
  • KC5510 (46)
  • KC5525 (18)
  • KC710 (26)
  • KC715M (1)
  • KC720 (79)
  • KC722 (9)
  • KC725M (7)
  • KC730 (130)
  • KC7310 (65)
  • KC732 (83)
  • KC735M (3)
  • KC740 (3)
  • KC8050 (109)
  • KC810 (107)
  • KC820 (2)
  • KC850 (122)
  • KC9010 (68)
  • KC9025 (101)
  • KC910 (99)
  • KC9105 (72)
  • KC9110 (132)
  • KC9120 (80)
  • KC9125 (117)
  • KC9125RR (7)
  • KC9140 (55)
  • KC9145 (34)
  • KC915M (1)
  • KC9210 (1)
  • KC9215 (48)
  • KC9225 (91)
  • KC9240 (82)
  • KC9240NEW (83)
  • KC9245 (48)
  • KC9315 (98)
  • KC9320 (75)
  • KC9325 (72)
  • KC935 (122)
  • KC950 (98)
  • KC990 (89)
  • KCD25 (40)
  • KCK05 (97)
  • KCK05B (59)
  • KCK15 (81)
  • KCK15B (97)
  • KCK20 (112)
  • KCK20B (123)
  • KCM15 (108)
  • KCM15B (89)
  • KCM25 (121)
  • KCM25B (86)
  • KCM35 (75)
  • KCM35B (47)
  • KCP05 (89)
  • KCP05B (34)
  • KCP10 (158)
  • KCP10B (113)
  • KCP15 (3)
  • KCP25 (144)
  • KCP25B (116)
  • KCP30 (96)
  • KCP30B (62)
  • KCP40 (64)
  • KCP40B (66)
  • KCPK05 (46)
  • KCPK30 (2)
  • KCS10 (40)
  • KCS10B (66)
  • KCU10 (184)
  • KCU25 (178)
  • KD050 (49)
  • KD081 (42)
  • KD100 (45)
  • KD105 (7)
  • KD120 (50)
  • KD1400 (44)
  • KD1405 (27)
  • KD1425 (60)
  • KD200 (2)
  • KD230 (3)
  • KD240 (3)
  • KM1 (30)
  • KMF (49)
  • KMS (2)
  • KT1120 (2)
  • KT125 (43)
  • KT150 (41)
  • KT175 (51)
  • KT195M (2)
  • KT315 (123)
  • KT325 (31)
  • KT5020 (8)
  • KTP10 (67)
  • KU10 (27)
  • KU10T (66)
  • KU25T (25)
  • KU30T (93)
  • KY1310 (41)
  • KY1320 (42)
  • KY1540 (34)
  • KY1615 (59)
  • KY2000 (39)
  • KY2100 (14)
  • KY3000 (51)
  • KY3400 (46)
  • KY3500 (62)
  • KY4000 (20)
  • KY4300 (21)
  • KY4400 (42)
  • KYHK15B (41)
  • KYHS10 (2)
  • KYK10 (35)
  • KYK25 (49)
  • KYK35 (49)
  • KYS25 (27)
  • KYS30 (28)
  • MC2 (5)
  • MP91M (1)
  • NL200 (7)
  • NL250 (62)
  • NL300 (63)
  • NL400 (24)
  • NL920 (41)
  • P10 (6)
  • P20 (3)
  • P25 (18)
  • P2F (7)
  • PB100 (1)
  • PB170 (1)
  • PB250 (1)
  • PB300 (1)
  • PS5 (6)
  • SF30 (3)
  • SP0819 (37)
  • SP0A00 (3)
  • SP3019 (40)
  • SP4019 (40)
  • SP4036 (2)
  • SP4093 (1)
  • SP4200 (3)
  • SP61EJ (7)
  • SP7779 (1)
  • SPADAP (8)
  • SPB400 (3)
  • SPM5F2 (5)
  • SPMQMA (1)
  • THM (1)
  • THM-X (1)
  • THMF-X (1)
  • TN10P (3)
  • TN10U (1)
  • TN15M (2)
  • TN15U (1)
  • TN2000 (2)
  • TN20K (2)
  • TN20P (3)
  • TN30M (3)
  • TN30P (1)
  • TN4000 (2)
  • TN5015 (2)
  • TN5020 (2)
  • TN5105 (2)
  • TN5120 (2)
  • TN6010 (1)
  • TN6025 (1)
  • TN7 (1)
  • TN7005 (2)
  • TN7010 (2)
  • TN7015 (2)
  • TN7025 (2)
  • TN7035 (8)
  • TN7105 (3)
  • TN7110 (2)
  • TN7115 (2)
  • TN7125 (2)
  • TN7135 (1)
  • TN8025 (3)
  • TTI15 (2)
  • TTR (1)
  • TTS (1)
  • TTX (5)
  • WBH10C (1)
  • WBH10P (1)
  • WBH10U (1)
  • WBH20P (1)
  • WBH25P (1)
  • WBH25U (1)
  • WBH30P (1)
  • WBK40U (2)
  • WBK45U (1)
  • WDN00U (1)
  • WDN25U (2)
  • WK05CT (3)
  • WK15CT (2)
  • WK20CT (4)
  • WM15CT (3)
  • WM25CT (3)
  • WM35CT (3)
  • WP05CT (1)
  • WP15CT (3)
  • WP20TT (1)
  • WP25CT (3)
  • WP35CT (3)
  • WS10PT (3)
  • WS25PT (3)
  • WU10HT (3)
  • X00511 (4)
  • YY3A00 (3)
  • YY87EL (3)
Hand Of Tool
  • L (88)
  • N (7)
  • R (95)
Wiper Insert
  • N (1215)
  • Y (41)
Minimum Axial Groove Diameter
  • 0.0 (4)
  • 0.062 (1)
  • 0.094 (1)
  • 0.188 (1)
  • 0.234 (1)
  • 0.25 (1)
  • 0.292 (3)
  • 0.296 (1)
  • 0.315 (1)
  • 0.342 (2)
  • 0.394 (1)
  • 0.422 (2)
  • 0.437 (1)
  • 0.4799 (1)
  • 0.48 (1)
  • 0.6 (1)
  • 0.6299 (1)
  • 0.65 (1)
  • 0.77 (1)
  • 0.787 (1)
  • 0.7874 (4)
  • 0.9252 (1)
  • 0.9299 (1)
  • 0.93 (2)
  • 0.9449 (1)
  • 0.984 (2)
  • 0.9843 (4)
  • 1.0236 (1)
  • 1.06 (1)
  • 1.1417 (1)
  • 1.1811 (2)
  • 1.2 (5)
  • 1.2598 (5)
  • 1.26 (3)
  • 1.378 (1)
  • 1.5748 (6)
  • 1.58 (1)
  • 1.626 (1)
  • 1.76 (2)
  • 1.89 (1)
  • 1.9685 (3)
  • 2.0 (1)
  • 2.01 (1)
  • 2.0472 (1)
  • 2.165 (1)
  • 2.205 (1)
  • 2.25 (1)
  • 2.252 (2)
  • 2.3622 (8)
  • 2.4 (2)
  • 2.4803 (4)
  • 2.756 (1)
  • 2.9528 (3)
  • 3.03 (1)
  • 3.15 (1)
  • 3.4055 (1)
  • 3.5 (4)
  • 3.937 (5)
  • 4.7244 (1)
  • 5.5 (20)
  • 6.874 (1)
  • 7.0866 (3)
  • 8.252 (9)
  • 8.752 (2)
  • 9.8425 (1)
  • 11.4173 (1)
  • 13.7795 (4)
  • 13.78 (1)
to
Minimum Axial Groove Diameter
  • 0.0 (4)
  • 1.575 (1)
  • 2.388 (1)
  • 4.77 (1)
  • 5.94 (1)
  • 6.35 (1)
  • 7.42 (3)
  • 7.52 (1)
  • 8.001 (1)
  • 8.68 (2)
  • 10.008 (1)
  • 10.72 (2)
  • 11.1 (1)
  • 12.19 (1)
  • 12.9 (1)
  • 15.24 (1)
  • 16.0 (1)
  • 16.51 (1)
  • 19.558 (1)
  • 19.99 (1)
  • 20.0 (4)
  • 23.5 (1)
  • 23.62 (2)
  • 23.622 (1)
  • 24.0 (1)
  • 24.994 (1)
  • 25.0 (5)
  • 26.0 (1)
  • 26.92 (1)
  • 29.0 (1)
  • 30.0 (2)
  • 30.48 (5)
  • 32.0 (8)
  • 35.0 (1)
  • 40.0 (6)
  • 40.13 (1)
  • 41.3 (1)
  • 44.7 (1)
  • 44.704 (1)
  • 48.006 (1)
  • 50.0 (3)
  • 50.8 (1)
  • 51.054 (1)
  • 52.0 (1)
  • 55.0 (1)
  • 56.007 (1)
  • 57.15 (1)
  • 57.2 (2)
  • 60.0 (8)
  • 60.96 (2)
  • 63.0 (4)
  • 70.002 (1)
  • 75.0 (3)
  • 76.962 (1)
  • 80.01 (1)
  • 86.5 (1)
  • 88.9 (4)
  • 100.0 (5)
  • 120.0 (1)
  • 139.7 (20)
  • 174.6 (1)
  • 180.0 (3)
  • 209.6 (9)