Beyond™ Evolution™ Grooving Inserts
Beyond™ Evolution™ Grooving Inserts
Beyond™ Evolution™ Grooving Inserts
Beyond™ Evolution™ Grooving Inserts

Beyond Evolution Grooving Inserts • GUP Full Radius Precision Ground • Metric

Beyond™ Evolution™ Grooving Inserts

Features and benefits

  • First choice in profiling.

  • >180° cutting edge.

  • High performance in all materials.

  • More precise widths and better repeatability.

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (12)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (12)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (12)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (12)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (12)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (12)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (12)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (12)
  • M Stainless Steel (12)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (12)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (12)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (12)
  • K Cast Iron (12)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (12)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (12)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (12)
  • N Non-Ferrous Materials (17)
    • N1
      Wrought Aluminum
      (17)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (12)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (17)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (12)
    • N6
      Carbon, Graphite Composites, CFRP
      (12)
  • S High-Temp Alloys (17)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (17)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (17)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (17)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (17)
  • H Hardened Materials (6)
    • H1
      Hardened Materials 44-48 HRC
      (6)
    • H2
      Hardened Materials 48-55 HRC
      (6)
Select First Choice
  • CN (12)
  • DE (12)
  • IN (3)
  • US (12)
Applications
  • Back Boring Back Boring (9)
  • Cut-Off Cut-Off (17)
  • Face Grooving Face Grooving (15)
  • Facing Facing (15)
  • Grooving Grooving (15)
  • ID Facing ID Facing (14)
  • ID Grooving ID Grooving (15)
  • Plunge Turning Plunge Turning (14)
  • Profiling Profiling (7)
  • Turning Turning (15)
Cutting Condition
  • Lightly Interrupted Cut (17)
  • Smooth Cut (17)
  • Varying Depth of Cut (17)
Cutting Edges Per Insert
  • 1.0 (17)
to
Corner configuration
Corner Radius
  • 1.0 (2)
  • 1.5 (3)
  • 2.0 (3)
  • 2.5 (3)
  • 3.0 (3)
  • 4.0 (3)
to
Corner Radius
  • 0.039 (2)
  • 0.059 (3)
  • 0.079 (3)
  • 0.098 (3)
  • 0.118 (3)
  • 0.157 (3)
to
Application
Drilling Condition
  • Lightly Interrupted Cut (17)
  • Smooth Cut (17)
  • Varying Depth of Cut (17)
Grade Of Cutting Tool
  • K313 (5)
  • KCU10 (6)
  • KCU25 (6)
Wiper Insert
  • N (17)
Front-End
Insert Shape
  • PRISMATIC (17)
Cutting Width
  • 2.0 (2)
  • 3.0 (3)
  • 4.0 (3)
  • 5.0 (3)
  • 6.0 (3)
  • 8.0 (3)
to
Cutting Width
  • 0.079 (2)
  • 0.118 (3)
  • 0.157 (3)
  • 0.197 (3)
  • 0.236 (3)
  • 0.315 (3)
to
Insert Geometry
Shape
  • PRISMATIC (17)
Insert Seat Size
  • 2 (2)
  • 3 (3)
  • 4 (3)
  • 5 (3)
  • 6 (3)
  • 8 (3)
Cutting Tool Material
  • H W (17)
other
Grade
  • K313 (5)
  • KCU10 (6)
  • KCU25 (6)
Platform
  • Beyond Evolution (17)
Tool Unit
  • I (17)
  • M (17)
Insert Hand
  • N (17)
obsoleteFacet
  • false (17)
  • true (17)
Drilling Condition Material
  • H-All (6)
  • K-All (17)
  • M-All (12)
  • N-All (17)
  • P-All (17)
  • S-All (17)
Cutting Condition Material
  • H-All (6)
  • K-All (17)
  • M-All (12)
  • N-All (17)
  • P-All (17)
  • S-All (17)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 10 of 17 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Insert Size [W] Cutting Width [W] Cutting Width Cuttg Width (+/-) Tolerance Cuttg Width (+/-) Tolerance [RC] Corner Radius Center [RC] Corner Radius Center [LI] Insert Length [LI] Insert Length
6231906 ER0200M02P00GUP ER0200M02P00GUP   KCU25 2 2.0000 .0790 0.025000 .0010 1.0000 .0390 8.9100 .3510
    6231903 ER0200M02P00GUP ER0200M02P00GUP   KCU10 2 2.0000 .0790 0.025000 .0010 1.0000 .0390 8.9100 .3510
      6012720 ER0300M03P00GUP ER0300M03P00GUP   KCU10 3 3.0000 .1180 0.025000 .0010 1.5000 .0590 9.5000 .3760
        5988780 ER0300M03P00GUP ER0300M03P00GUP   KCU25 3 3.0000 .1180 0.025000 .0010 1.5000 .0590 9.5000 .3760
          6012721 ER0400M04P00GUP ER0400M04P00GUP   KCU10 4 4.0000 .1570 0.025000 .0010 2.0000 .0790 10.1000 .3990
            5988781 ER0400M04P00GUP ER0400M04P00GUP   KCU25 4 4.0000 .1570 0.025000 .0010 2.0000 .0790 10.1000 .3990
              6012722 ER0500M05P00GUP ER0500M05P00GUP   KCU10 5 5.0000 .1970 0.025000 .0010 2.5000 .0980 12.2000 .4800
                5988782 ER0500M05P00GUP ER0500M05P00GUP   KCU25 5 5.0000 .1970 0.025000 .0010 2.5000 .0980 12.2000 .4800
                  6012723 ER0600M06P00GUP ER0600M06P00GUP   KCU10 6 6.0000 .2360 0.025000 .0010 3.0000 .1180 14.5000 .5720
                    5988783 ER0600M06P00GUP ER0600M06P00GUP   KCU25 6 6.0000 .2360 0.025000 .0010 3.0000 .1180 14.5000 .5720
                      5988860 ER0600M06P00GUP ER0600M06P00GUP   K313 6 6.0000 .2360 0.025000 .0010 3.0000 .1180 14.5000 .5720
                        6012724 ER0800M08P00GUP ER0800M08P00GUP   KCU10 8 8.0000 .3150 0.025000 .0010 4.0000 .1570 17.4000 .6850
                          5988785 ER0800M08P00GUP ER0800M08P00GUP   KCU25 8 8.0000 .3150 0.025000 .0010 4.0000 .1570 17.4000 .6850
                            5988833 ER0300M03P00GUP ER0300M03P00GUP   K313 3 3.0000 .1180 0.025000 .0010 1.5000 .0590 9.5000 .3760
                              5988858 ER0400M04P00GUP ER0400M04P00GUP   K313 4 4.0000 .1570 0.025000 .0010 2.0000 .0790 10.1000 .3990
                                5988859 ER0500M05P00GUP ER0500M05P00GUP   K313 5 5.0000 .1970 0.025000 .0010 2.5000 .0980 12.2000 .4800
                                  5988861 ER0800M08P00GUP ER0800M08P00GUP   K313 8 8.0000 .3150 0.025000 .0010 4.0000 .1570 17.4000 .6850
                                    List price:
                                    Discount: %
                                    Your price::
                                    Replacement This item is not available
                                    Replacement Product This item may be available through a distributor
                                    Qty

                                    Grades

                                    • K313

                                      Composition: A hard, low binder content, unalloyed WC/Co fine-grain grade.
                                      Application: Exceptional edge wear resistance combined with very high strength for machining titanium, cast irons, austenitic stainless steels, non-ferrous metals, non-metals, and most high-temp alloys. Superior thermal deformation and depth-of-cut notch resistance. The grain structure is well controlled for minimal pits and flaws, which contributes to long, reliable service.

                                      N Non-Ferrous
                                      S High-Temp Alloys
                                    • KCU10

                                      Composition: An advanced multilayer PVD coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating improves edge stability with wide range speed and feed capabilities.
                                      Application: The KCU10 grade is ideal for finishing to general machining of most workpiece materials at a wide range of speed and feed capabilities. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys with improved edge toughness and higher cutting speed/feed capability.

                                      P Steel
                                      M Stainless Steel
                                      K Cast Iron
                                      N Non-Ferrous
                                      S High-Temp Alloys
                                      H Hardened Materials
                                    • KCU25

                                      Turning Composition: An advanced PVD grade with hard AlTiN coating and fine-grain unalloyed substrate. The new and improved coating improves edge stability with wide range speed and feed capabilities.

                                      Turning Application: The KCU25 grade is ideal for general machining of most steels, stainless steels, high-temp alloys, titanium, irons, and non-ferrous materials in a wide range of speeds and feeds with improved edge toughness for interrupted cut and high feed rates.

                                      Holemaking Composition: Advanced CVD TiCN-Al2O3 coating combined with a tough carbide substrate.

                                      Holemaking Application: First choice for steel, stainless steel, and cast iron. This grade offers adequate deformation resistance, excellent edge strength, and superior wear resistance over a wide range of machining conditions for high productivity with very good reliability.

                                      P Steel
                                      M Stainless Steel
                                      K Cast Iron
                                      N Non-Ferrous
                                      S High-Temp Alloys
                                    If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                    You are about to create a duplicate . Do you want to proceed?
                                    You are about to delete Do you want to proceed?
                                    What would you like to rename your to?
                                    Please enter a valid name
                                    Please enter a name for the duplicate
                                    Please enter a valid name
                                    You are about to add to your My Solutions page. Do you want to proceed?
                                    Please enter a valid name
                                    Send a copy of

                                    Please enter a valid Email
                                    Please enter a valid name

                                    We have found the following CAD Drawings

                                    Select the files you are looking for and download them all at once

                                    You should be logged to see your dashboard information
                                    The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                    item(s) successfully added to the cart
                                    View Cart