No Items in Cart
Sign In
Loading Profile
English
COVID-19: How Kennametal is responding
Beyond™ Evolution™ Grooving Inserts
Beyond™ Evolution™ Grooving Inserts
Beyond™ Evolution™ Grooving Inserts
Beyond™ Evolution™ Grooving Inserts

Grooving and Cut-Off

Beyond™ Evolution™ Grooving Inserts

Features and benefits

  • Positive chipbreaker lowers cutting forces.

  • Engineered geometry for chip control in side turning.

  • High performance in all materials.

  • More precise widths and better repeatability.

Workpiece Material

P
S
H
K
M
N
Displaying 1-10 of 30 results
Select Columns
ColumnsX
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Insert Size [W] Cutting Width [W] Cutting Width Cuttg Width (+/-) Tolerance Cuttg Width (+/-) Tolerance [RR] Corner Radius [RR] Corner Radius [LI] Insert Length [LI] Insert Length
5988904 EG063I1FP05GUP EG063I1FP05GUP K313 1F 1.6000 .0630 0.025000 .0010 0.2000 .0080 9.0000 .3530
6012706 EG063I1FP05GUP EG063I1FP05GUP KCU10 1F 1.6000 .0630 0.025000 .0010 0.2000 .0080 9.0000 .3530
5941110 EG125I03P05GUP EG125I03P05GUP KCU25 3 3.1750 .1250 0.025000 .0010 0.2030 .0080 9.5530 .3761
5941114 EG125I03P05GUP EG125I03P05GUP K313 3 3.1750 .1250 0.025000 .0010 0.2030 .0080 9.5530 .3761
6012713 EG125I03P1GUP EG125I03P1GUP KCU10 3 3.1750 .1250 0.025000 .0010 0.4000 .0156 9.4000 .3720
5941112 EG187I04P1GUP EG187I04P1GUP KCU25 4 4.7600 .1875 0.025000 .0010 0.4000 .0156 10.1000 .3990
6012715 EG187I04P2GUP EG187I04P2GUP KCU10 4 4.7620 .1875 0.025000 .0010 0.7940 .0313 10.1000 .3990
6012716 EG250I06P1GUP EG250I06P1GUP KCU10 6 6.3500 .2500 0.025000 .0010 0.4000 .0160 14.5000 .5720
6012717 EG250I06P2GUP EG250I06P2GUP KCU10 6 6.3500 .2500 0.025000 .0010 0.8000 .0310 14.5000 .5720
5988962 EG250I06P2GUP EG250I06P2GUP K313 6 6.3500 .2500 0.025000 .0010 0.8000 .0310 14.5000 .5720
6012719 EG375I10P3GUP EG375I10P3GUP KCU10 10 9.5250 .3750 0.025000 .0010 1.2000 .0470 20.7000 .8150
5988812 EG375I10P3GUP EG375I10P3GUP KCU25 10 9.5250 .3750 0.025000 .0010 1.2000 .0470 20.7000 .8150
5988964 EG375I10P3GUP EG375I10P3GUP K313 10 9.5250 .3750 0.025000 .0010 1.2000 .0470 20.7000 .8150
5988811 EG063I1FP05GUP EG063I1FP05GUP KCU25 1F 1.6000 .0630 0.025000 .0010 0.2000 .0080 9.0000 .3530
5988787 EG094I02P05GUP EG094I02P05GUP KCU25 2 2.3880 .0940 0.025000 .0010 0.2000 .0080 8.8800 .3500
6012710 EG094I02P05GUP EG094I02P05GUP KCU10 2 2.3880 .0940 0.025000 .0010 0.2000 .0080 8.8800 .3500
5988903 EG094I02P05GUP EG094I02P05GUP K313 2 2.3880 .0940 0.025000 .0010 0.2000 .0080 8.8800 .3500
6012712 EG125I03P05GUP EG125I03P05GUP KCU10 3 3.1750 .1250 0.025000 .0010 0.2030 .0080 9.5530 .3761
5941111 EG125I03P1GUP EG125I03P1GUP KCU25 3 3.1750 .1250 0.025000 .0010 0.4000 .0156 9.4000 .3720
5941115 EG125I03P1GUP EG125I03P1GUP K313 3 3.1750 .1250 0.025000 .0010 0.4000 .0156 9.4000 .3720
5941116 EG187I04P1GUP EG187I04P1GUP K313 4 4.7600 .1875 0.025000 .0010 0.4000 .0156 10.1000 .3990
6012714 EG187I04P1GUP EG187I04P1GUP KCU10 4 4.7600 .1875 0.025000 .0010 0.4000 .0156 10.1000 .3990
5941113 EG187I04P2GUP EG187I04P2GUP KCU25 4 4.7620 .1875 0.025000 .0010 0.7940 .0313 10.1000 .3990
5941117 EG187I04P2GUP EG187I04P2GUP K313 4 4.7620 .1875 0.025000 .0010 0.7940 .0313 10.1000 .3990
5988961 EG250I06P1GUP EG250I06P1GUP K313 6 6.3500 .2500 0.025000 .0010 0.4000 .0160 14.5000 .5720
5988788 EG250I06P1GUP EG250I06P1GUP KCU25 6 6.3500 .2500 0.025000 .0010 0.4000 .0160 14.5000 .5720
5988789 EG250I06P2GUP EG250I06P2GUP KCU25 6 6.3500 .2500 0.025000 .0010 0.8000 .0310 14.5000 .5720
5988790 EG312I08P3GUP EG312I08P3GUP KCU25 8 7.9200 .3120 0.025000 .0010 1.2000 .0470 17.4000 .6850
6012718 EG312I08P3GUP EG312I08P3GUP KCU10 8 7.9200 .3120 0.025000 .0010 1.2000 .0470 17.4000 .6850
5988963 EG312I08P3GUP EG312I08P3GUP K313 8 7.9200 .3120 0.025000 .0010 1.2000 .0470 17.4000 .6850
Select Filters
FiltersX
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (20)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (20)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (20)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (20)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (20)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (20)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (20)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (20)
  • M Stainless Steel (20)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (20)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (20)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (20)
  • K Cast Iron (20)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (20)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (20)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (20)
  • N Non-Ferrous Materials (30)
    • N1
      Wrought Aluminum
      (30)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (20)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (30)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (20)
    • N6
      Carbon, Graphite Composites, CFRP
      (20)
  • S High-Temp Alloys (30)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (30)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (30)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (30)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (30)
  • H Hardened Materials (10)
    • H1
      Hardened Materials 44-48 HRC
      (10)
    • H2
      Hardened Materials 48-55 HRC
      (10)
Applications
  • Cut-Off (30)
  • Face Grooving (30)
  • Grooving (30)
  • ID Grooving (30)
  • Facing (25)
  • ID Facing (25)
  • Plunge Turning (25)
  • Turning (25)
  • Back Boring (12)
  • Profiling (5)
Cutting Condition
  • Smooth Cut (30)
  • Lightly Interrupted Cut (26)
  • Varying Depth of Cut (26)
  • Heavily Interrupted Cut (4)
Cutting Edges Per Insert
to
Corner configuration
Corner Radius
to
Corner Radius
to
Application
Drilling Condition
  • Smooth Cut (30)
  • Lightly Interrupted Cut (26)
  • Varying Depth of Cut (26)
  • Heavily Interrupted Cut (4)
Grade Of Cutting Tool
  • K313 (10)
  • KCU10 (10)
  • KCU25 (10)
Wiper Insert
  • N (30)
Front-End
Cutting Width
to
Cutting Width
to
Insert Shape
  • PRISMATIC (26)
Insert Geometry
Shape
  • PRISMATIC (26)
Insert Seat Size
  • 3 (6)
  • 4 (6)
  • 6 (6)
  • 10 (3)
  • 1F (3)
  • 2 (3)
  • 8 (3)
Cutting Tool Material
  • H W (30)
Insert Thickness
to
Insert Thickness
to
other
Grade
  • K313 (10)
  • KCU10 (10)
  • KCU25 (10)
Platform
  • Beyond Evolution (30)
Tool Unit
  • I (30)
  • M (30)
Drilling Condition Material
  • K-All (30)
  • M-All (30)
  • N-All (30)
  • S-All (30)
  • P-All (14)
  • H-All (10)
Cutting Condition Material
  • K-All (30)
  • M-All (30)
  • N-All (30)
  • S-All (30)
  • P-All (14)
  • H-All (10)
Insert Hand
  • N (30)
No filters matching ""

Grades

  • K313

    Composition: A hard, low binder content, unalloyed WC/Co fine-grain grade.
    Application: Exceptional edge wear resistance combined with very high strength for machining titanium, cast irons, austenitic stainless steels, non-ferrous metals, non-metals, and most high-temp alloys. Superior thermal deformation and depth-of-cut notch resistance. The grain structure is well controlled for minimal pits and flaws, which contributes to long, reliable service.

    S
    N
  • KCU10

    Composition: An advanced multilayer PVD coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating improves edge stability with wide range speed and feed capabilities.
    Application: The KCU10 grade is ideal for finishing to general machining of most workpiece materials at a wide range of speed and feed capabilities. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys with improved edge toughness and higher cutting speed/feed capability.

    P
    S
    H
    K
    M
    N
  • KCU25

    Turning Composition: An advanced PVD grade with hard AlTiN coating and fine-grain unalloyed substrate. The new and improved coating improves edge stability with wide range speed and feed capabilities.

    Turning Application: The KCU25 grade is ideal for general machining of most steels, stainless steels, high-temp alloys, titanium, irons, and non-ferrous materials in a wide range of speeds and feeds with improved edge toughness for interrupted cut and high feed rates.

    Holemaking Composition: Advanced CVD TiCN-Al2O3 coating combined with a tough carbide substrate.

    Holemaking Application: First choice for steel, stainless steel, and cast iron. This grade offers adequate deformation resistance, excellent edge strength, and superior wear resistance over a wide range of machining conditions for high productivity with very good reliability.

    P
    S
    K
    M
    N