No Items in Cart
Sign In
Loading Profile
English
COVID-19: How Kennametal is responding
Beyond™ Evolution™ Grooving Inserts
Beyond™ Evolution™ Grooving Inserts
Beyond™ Evolution™ Grooving Inserts
Beyond™ Evolution™ Grooving Inserts

Grooving and Cut-Off

Beyond™ Evolution™ Grooving Inserts

Features and benefits

  • Positive chipbreaker lowers cutting forces.

  • Engineered geometry for chip control in side turning.

  • High performance in all materials.

  • More precise widths and better repeatability.

Workpiece Material

P
S
H
K
M
N
Displaying 1-10 of 39 results
Select Columns
ColumnsX
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Insert Size [W] Cutting Width [W] Cutting Width Cuttg Width (+/-) Tolerance Cuttg Width (+/-) Tolerance [RR] Corner Radius [RR] Corner Radius [LI] Insert Length [LI] Insert Length
5988771 EG0200M02P02GUP EG0200M02P02GUP   KCU25 2 2.0000 .0787 0.025000 .0010 0.2000 .7870 8.9210 .3512
5941102 EG0300M03P04GUP EG0300M03P04GUP   KCU25 3 3.0000 .1181 0.025000 .0010 0.4000 .0157 9.5500 .3760
5941103 EG0400M04P04GUP EG0400M04P04GUP   KCU25 4 4.0000 .1575 0.025000 .0010 0.4000 .0158 10.1450 .3990
5941104 EG0400M04P08GUP EG0400M04P08GUP   KCU25 4 4.0000 .1575 0.025000 .0010 0.8000 .0315 10.1450 .3994
6012701 EG0400M04P08GUP EG0400M04P08GUP   KCU10 4 4.0000 .1575 0.025000 .0010 0.8000 .0315 10.1450 .3994
6012702 EG0500M05P04GUP EG0500M05P04GUP   KCU10 5 5.0000 .1968 0.025000 .0010 0.4000 .0157 12.1830 .4796
5988772 EG0600M06P04GUP EG0600M06P04GUP   KCU25 6 6.0000 .2362 0.025000 .0010 0.4000 .0157 14.5310 .0572
5988778 EG0800M08P12GUP EG0800M08P12GUP   KCU25 8 8.0000 .3150 0.025000 .0010 1.2000 .0470 17.4000 .6850
6012711 EG1000M10P12GUP EG1000M10P12GUP   KCU10 10 10.0000 .3940 0.025000 .0010 1.2000 .0470 20.7000 .8150
5941105 EG0300M03P02GUP EG0300M03P02GUP   K313 3 3.0000 .1180 0.025000 .0010 0.2000 .0079 9.5500 .3760
5941108 EG0400M04P04GUP EG0400M04P04GUP   K313 4 4.0000 .1575 0.025000 .0010 0.4000 .0158 10.1450 .3990
5988836 EG0500M05P04GUP EG0500M05P04GUP   K313 5 5.0000 .1968 0.025000 .0010 0.4000 .0157 12.1830 .4796
5988837 EG0500M05P08GUP EG0500M05P08GUP   K313 5 5.0000 .1970 0.025000 .0010 0.8000 .0320 12.2000 .4800
5988834 EG0600M06P04GUP EG0600M06P04GUP   K313 6 6.0000 .2362 0.025000 .0010 0.4000 .0157 14.5310 .0572
5988839 EG0800M08P08GUP EG0800M08P08GUP   K313 8 8.0000 .3150 0.025000 .0010 0.8000 .0310 17.4000 .6850
5988851 EG1000M10P12GUP EG1000M10P12GUP   K313 10 10.0000 .3940 0.025000 .0010 1.2000 .0470 20.7000 .8150
5988779 EG1000M10P12GUP EG1000M10P12GUP   KCU25 10 10.0000 .3940 0.025000 .0010 1.2000 .0470 20.7000 .8150
6012687 EG0200M02P02GUP EG0200M02P02GUP   KCU10 2 2.0000 .0787 0.025000 .0010 0.2000 .7870 8.9210 .3512
5941101 EG0300M03P02GUP EG0300M03P02GUP   KCU25 3 3.0000 .1180 0.025000 .0010 0.2000 .0079 9.5500 .3760
6012688 EG0300M03P02GUP EG0300M03P02GUP   KCU10 3 3.0000 .1180 0.025000 .0010 0.2000 .0079 9.5500 .3760
6012689 EG0300M03P04GUP EG0300M03P04GUP   KCU10 3 3.0000 .1181 0.025000 .0010 0.4000 .0157 9.5500 .3760
6012690 EG0400M04P04GUP EG0400M04P04GUP   KCU10 4 4.0000 .1575 0.025000 .0010 0.4000 .0158 10.1450 .3990
5988774 EG0500M05P04GUP EG0500M05P04GUP   KCU25 5 5.0000 .1968 0.025000 .0010 0.4000 .0157 12.1830 .4796
5988775 EG0500M05P08GUP EG0500M05P08GUP   KCU25 5 5.0000 .1970 0.025000 .0010 0.8000 .0320 12.2000 .4800
6012703 EG0500M05P08GUP EG0500M05P08GUP   KCU10 5 5.0000 .1970 0.025000 .0010 0.8000 .0320 12.2000 .4800
6012704 EG0600M06P04GUP EG0600M06P04GUP   KCU10 6 6.0000 .2362 0.025000 .0010 0.4000 .0157 14.5310 .0572
5988773 EG0600M06P08GUP EG0600M06P08GUP   KCU25 6 6.0000 .2362 0.025000 .0010 0.8000 .0315 14.5400 .5720
6012705 EG0600M06P08GUP EG0600M06P08GUP   KCU10 6 6.0000 .2362 0.025000 .0010 0.8000 .0315 14.5400 .5720
6012707 EG0700M06P08GUP EG0700M06P08GUP   KCU10 6 7.0000 .2760 0.025000 .0010 0.8000 .0310 14.5000 .5720
5988777 EG0800M08P08GUP EG0800M08P08GUP   KCU25 8 8.0000 .3150 0.025000 .0010 0.8000 .0310 17.4000 .6850
6012708 EG0800M08P08GUP EG0800M08P08GUP   KCU10 8 8.0000 .3150 0.025000 .0010 0.8000 .0310 17.4000 .6850
5988818 EG0200M02P02GUP EG0200M02P02GUP   K313 2 2.0000 .0787 0.025000 .0010 0.2000 .7870 8.9210 .3512
5941107 EG0300M03P04GUP EG0300M03P04GUP   K313 3 3.0000 .1181 0.025000 .0010 0.4000 .0157 9.5500 .3760
5941109 EG0400M04P08GUP EG0400M04P08GUP   K313 4 4.0000 .1575 0.025000 .0010 0.8000 .0315 10.1450 .3994
5988835 EG0600M06P08GUP EG0600M06P08GUP   K313 6 6.0000 .2362 0.025000 .0010 0.8000 .0315 14.5400 .5720
5988776 EG0700M06P08GUP EG0700M06P08GUP   KCU25 6 7.0000 .2760 0.025000 .0010 0.8000 .0310 14.5000 .5720
5988838 EG0700M06P08GUP EG0700M06P08GUP   K313 6 7.0000 .2760 0.025000 .0010 0.8000 .0310 14.5000 .5720
6012709 EG0800M08P12GUP EG0800M08P12GUP   KCU10 8 8.0000 .3150 0.025000 .0010 1.2000 .0470 17.4000 .6850
5988840 EG0800M08P12GUP EG0800M08P12GUP   K313 8 8.0000 .3150 0.025000 .0010 1.2000 .0470 17.4000 .6850
Select Filters
FiltersX
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (26)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (26)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (26)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (26)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (26)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (26)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (26)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (26)
  • M Stainless Steel (26)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (26)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (26)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (26)
  • K Cast Iron (26)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (26)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (26)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (26)
  • N Non-Ferrous Materials (39)
    • N1
      Wrought Aluminum
      (39)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (26)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (39)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (26)
    • N6
      Carbon, Graphite Composites, CFRP
      (26)
  • S High-Temp Alloys (39)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (39)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (39)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (39)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (39)
  • H Hardened Materials (13)
    • H1
      Hardened Materials 44-48 HRC
      (13)
    • H2
      Hardened Materials 48-55 HRC
      (13)
firstChoiceCountry
Select First Choice
  • CN (23)
  • DE (23)
  • US (23)
  • IN (10)
  • GB (3)
Applications
  • Cut-Off (39)
  • Face Grooving (39)
  • Grooving (39)
  • ID Grooving (39)
  • Facing (36)
  • ID Facing (36)
  • Plunge Turning (36)
  • Turning (36)
  • Back Boring (21)
  • Profiling (3)
Cutting Condition
  • Smooth Cut (39)
  • Lightly Interrupted Cut (35)
  • Varying Depth of Cut (35)
  • Heavily Interrupted Cut (4)
Cutting Edges Per Insert
to
Corner configuration
Corner Radius
to
Corner Radius
to
Application
Drilling Condition
  • Smooth Cut (39)
  • Lightly Interrupted Cut (35)
  • Varying Depth of Cut (35)
  • Heavily Interrupted Cut (4)
Grade Of Cutting Tool
  • K313 (13)
  • KCU10 (13)
  • KCU25 (13)
Wiper Insert
  • N (39)
Front-End
Cutting Width
to
Cutting Width
to
Insert Shape
  • PRISMATIC (39)
Insert Geometry
Shape
  • PRISMATIC (39)
Insert Seat Size
  • 6 (9)
  • 3 (6)
  • 4 (6)
  • 5 (6)
  • 8 (6)
  • 10 (3)
  • 2 (3)
Cutting Tool Material
  • H W (39)
Insert Thickness
to
Insert Thickness
to
other
Grade
  • K313 (13)
  • KCU10 (13)
  • KCU25 (13)
Platform
  • Beyond Evolution (39)
Tool Unit
  • I (39)
  • M (39)
Drilling Condition Material
  • K-All (39)
  • M-All (39)
  • N-All (39)
  • S-All (39)
  • P-All (17)
  • H-All (13)
Cutting Condition Material
  • K-All (39)
  • M-All (39)
  • N-All (39)
  • S-All (39)
  • P-All (17)
  • H-All (13)
Insert Hand
  • N (39)
No filters matching ""

Grades

  • K313

    Composition: A hard, low binder content, unalloyed WC/Co fine-grain grade.
    Application: Exceptional edge wear resistance combined with very high strength for machining titanium, cast irons, austenitic stainless steels, non-ferrous metals, non-metals, and most high-temp alloys. Superior thermal deformation and depth-of-cut notch resistance. The grain structure is well controlled for minimal pits and flaws, which contributes to long, reliable service.

    S
    N
  • KCU10

    Composition: An advanced multilayer PVD coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating improves edge stability with wide range speed and feed capabilities.
    Application: The KCU10 grade is ideal for finishing to general machining of most workpiece materials at a wide range of speed and feed capabilities. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys with improved edge toughness and higher cutting speed/feed capability.

    P
    S
    H
    K
    M
    N
  • KCU25

    Turning Composition: An advanced PVD grade with hard AlTiN coating and fine-grain unalloyed substrate. The new and improved coating improves edge stability with wide range speed and feed capabilities.

    Turning Application: The KCU25 grade is ideal for general machining of most steels, stainless steels, high-temp alloys, titanium, irons, and non-ferrous materials in a wide range of speeds and feeds with improved edge toughness for interrupted cut and high feed rates.

    Holemaking Composition: Advanced CVD TiCN-Al2O3 coating combined with a tough carbide substrate.

    Holemaking Application: First choice for steel, stainless steel, and cast iron. This grade offers adequate deformation resistance, excellent edge strength, and superior wear resistance over a wide range of machining conditions for high productivity with very good reliability.

    P
    S
    K
    M
    N