No Items in Cart
Sign In
Loading Profile
English
COVID-19: How Kennametal is responding
Drill Fix™ DFSP™ • HP Inserts
Drill Fix™ DFSP™ • HP Inserts
Drill Fix™ DFSP™ • HP Inserts
Drill Fix™ DFSP™ • HP Inserts

Indexable Drills

Drill Fix™ DFSP™ • HP Inserts

Features and benefits

  • Four cutting edge insert.

  • High positive chipbreaker geometry preferred on ductile and normal chipping materials.

  • Additional inserts with increased corner radius to support usage with Beyond™ grades.

Workpiece Material

P
S
H
K
M
N
Displaying 1-10 of 40 results
Select Columns
ColumnsX
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [D] Insert IC Size [D] Insert IC Size [D1] Insert Hole Size [D1] Insert Hole Size [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [GAA] Insert Rake Angle [Clearance Angle Major Clearance Angle Major Second
5692801 SPGX050204HP SPGX050204HP   KC7140 5.5600 .2188 2.2500 .0890 2.3800 .0940 0.4000 .0160 10.000 7.000 11.000
1848593 SPGX060304RHP SPGX060304RHP   KC7140 6.3500 .2500 2.6500 .1040 3.1800 .1252 0.4000 .0156 10.000 7.000 11.000
5534148 SPGX060304RHP SPGX060304RHP   KCU40 6.3500 .2500 2.6500 .1040 3.1800 .1252 0.4000 .0156 10.000 7.000 11.000
1848597 SPGX070304RHP SPGX070304RHP   KC7140 7.9400 .3125 2.8500 .1120 3.1800 .1252 0.4000 .0156 10.000 7.000 11.000
5534231 SPGX070304RHP SPGX070304RHP   KCU40 7.9400 .3125 2.8500 .1120 3.1800 .1252 0.4000 .0156 10.000 7.000 11.000
5534256 SPGX070304RHP SPGX070304RHP   KCU25 7.9400 .3125 2.8500 .1120 3.1800 .1252 0.4000 .0156 10.000 7.000 11.000
1848601 SPPX09T308RHP SPPX09T308RHP   KC7140 9.5250 .3750 3.6000 .1417 3.9700 .1563 0.8000 .0312 10.000 7.000 11.000
5534259 SPPX09T308RHP SPPX09T308RHP   KCU25 9.5250 .3750 3.6000 .1417 3.9700 .1563 0.8000 .0312 10.000 7.000 11.000
4042938 SPPX09T310HP SPPX09T310HP   KCU40 9.5250 .3750 3.6000 .1417 3.9700 .1563 1.0000 .0390 10.000 7.000 11.000
3774906 SPPX15T508RHP SPPX15T508RHP   KC7140 15.7320 .6250 5.5000 .2340 5.9500 .2340 0.8000 .0312 10.000 7.000 11.000
5534250 SPPX15T508RHP SPPX15T508RHP   KCU40 15.7320 .6250 5.5000 .2340 5.9500 .2340 0.8000 .0312 10.000 7.000 11.000
4042944 SPPX15T512HP SPPX15T512HP   KCU40 15.7320 .6250 5.5000 .2170 5.9500 .2340 1.2000 .0469 10.000 7.000 11.000
5692729 SPGX050204HP SPGX050204HP   KCU40 5.5600 .2188 2.2500 .0890 2.3800 .0940 0.4000 .0160 10.000 7.000 11.000
5692727 SPGX050204HP SPGX050204HP   KCU25 5.5600 .2188 2.2500 .0890 2.3800 .0940 0.4000 .0160 10.000 7.000 11.000
5534253 SPGX060304RHP SPGX060304RHP   KCU25 6.3500 .2500 2.6500 .1040 3.1800 .1252 0.4000 .0156 10.000 7.000 11.000
4040135 SPGX070308HP SPGX070308HP   KCU25 7.9400 .3125 2.8500 .1120 3.1800 .1252 0.8000 .0312 10.000 7.000 11.000
4042935 SPGX070308HP SPGX070308HP   KCU40 7.9400 .3125 2.8500 .1120 3.1800 .1252 0.8000 .0312 10.000 7.000 11.000
5534234 SPPX09T308RHP SPPX09T308RHP   KCU40 9.5250 .3750 3.6000 .1417 3.9700 .1563 0.8000 .0312 10.000 7.000 11.000
4042842 SPPX09T310HP SPPX09T310HP   KCU25 9.5250 .3750 3.6000 .1417 3.9700 .1563 1.0000 .0390 10.000 7.000 11.000
1848605 SPPX120408RHP SPPX120408RHP   KC7140 12.7000 .5000 4.6000 .1811 4.7600 .1875 0.8000 .0312 10.000 7.000 11.000
5534262 SPPX120408RHP SPPX120408RHP   KCU25 12.7000 .5000 4.6000 .1811 4.7600 .1875 0.8000 .0312 10.000 7.000 11.000
5534237 SPPX120408RHP SPPX120408RHP   KCU40 12.7000 .5000 4.6000 .1811 4.7600 .1875 0.8000 .0312 10.000 7.000 11.000
4040141 SPPX120412HP SPPX120412HP   KCU25 12.7000 .5000 4.6000 .1811 4.7600 .1875 1.2000 .0469 10.000 7.000 11.000
4042941 SPPX120412HP SPPX120412HP   KCU40 12.7000 .5000 4.6000 .1811 4.7600 .1875 1.2000 .0469 10.000 7.000 11.000
5534265 SPPX15T508RHP SPPX15T508RHP   KCU25 15.7320 .6250 5.5000 .2340 5.9500 .2340 0.8000 .0312 10.000 7.000 11.000
4042915 SPPX15T512HP SPPX15T512HP   KCU25 15.7320 .6250 5.5000 .2170 5.9500 .2340 1.2000 .0469 10.000 7.000 11.000
3119362 SPGX060304RHP SPGX060304RHP   KC7815 6.3500 .2500 2.6500 .1040 3.1800 .1252 0.4000 .0156 10.000 7.000 11.000
4042889 SPGX070308HP SPGX070308HP   KCPK10 7.9400 .3125 2.8500 .1120 3.1800 .1252 0.8000 .0312 10.000 7.000 11.000
1848600 SPPX09T308RHP SPPX09T308RHP   KC7215 9.525 .3750 3.600 .1417 3.970 .1563 0.800 .0312 10.000 7.000 11.000
1848604 SPPX120408RHP SPPX120408RHP   KC7215 12.700 .5000 4.600 .1811 4.760 .1875 0.800 .0312 10.000 7.000 11.000
3774792 SPPX15T508RHP SPPX15T508RHP   KC7215 15.732 .6250 5.500 .2340 5.950 .2340 0.800 .0312 10.000 7.000 11.000
3774908 SPPX15T508RHP SPPX15T508RHP   KC7815 15.732 .6250 5.500 .2340 5.950 .2340 0.800 .0312 10.000 7.000 11.000
4042908 SPPX15T512HP SPPX15T512HP   KCPK10 15.7320 .6250 5.5000 .2170 5.9500 .2340 1.2000 .0469 10.000 7.000 11.000
1848532 SPGX060304RHP SPGX060304RHP   KC7215 6.350 .2500 2.650 .1040 3.180 .1252 0.400 .0156 10.000 7.000 11.000
1848596 SPGX070304RHP SPGX070304RHP   KC7215 7.940 .3125 2.850 .1120 3.180 .1252 0.400 .0156 10.000 7.000 11.000
3119394 SPGX070304RHP SPGX070304RHP   KC7815 7.9400 .3125 2.8500 .1120 3.1800 .1252 0.4000 .0156 10.000 7.000 11.000
3119396 SPPX09T308RHP SPPX09T308RHP   KC7815 9.5250 .3750 3.6000 .1417 3.9700 .1563 0.8000 .0312 10.000 7.000 11.000
4042892 SPPX09T310HP SPPX09T310HP   KCPK10 9.5250 .3750 3.6000 .1417 3.9700 .1563 1.0000 .0390 10.000 7.000 11.000
3119398 SPPX120408RHP SPPX120408RHP   KC7815 12.7000 .5000 4.6000 .1811 4.7600 .1875 0.8000 .0312 10.000 7.000 11.000
4042905 SPPX120412HP SPPX120412HP   KCPK10 12.7000 .5000 4.6000 .1811 4.7600 .1875 1.2000 .0469 10.000 7.000 11.000
Select Filters
FiltersX
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (40)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (40)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (40)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (40)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (40)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (40)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (40)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (40)
  • M Stainless Steel (25)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (25)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (25)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (25)
  • K Cast Iron (31)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (31)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (31)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (31)
  • N Non-Ferrous Materials (25)
    • N1
      Wrought Aluminum
      (25)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (25)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (25)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (25)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (25)
    • N6
      Carbon, Graphite Composites, CFRP
      (25)
    • N7
      MMC's
      (25)
  • S High-Temp Alloys (25)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (25)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (25)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (25)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (25)
  • H Hardened Materials (9)
    • H1
      Hardened Materials 44-48 HRC
      (9)
    • H2
      Hardened Materials 48-55 HRC
      (9)
    • H3
      Hardened Materials 56-60 HRC
      (9)
    • H4
      Hardened Materials >60 HRC
      (9)
firstChoiceCountry
Select First Choice
  • CN (26)
  • DE (26)
  • US (26)
  • GB (9)
  • IN (8)
Applications
  • ID Thread Turning (40)
Cutting Condition
  • Stable (24)
  • Unstable (20)
  • Interrupted (16)
Cutting Edges Per Insert
to
Corner configuration
Corner Radius
to
Corner Radius
to
Application
Drilling Condition
  • Stable (24)
  • Unstable (20)
  • Interrupted (16)
Grade Of Cutting Tool
  • KCU25 (10)
  • KCU40 (10)
  • KC7140 (6)
  • KC7215 (5)
  • KC7815 (5)
  • KCPK10 (4)
Wiper Insert
  • N (40)
Front-End
Insert Shape
  • S-SQUARE 90 (40)
Insert Geometry
Shape
  • S-SQUARE 90 (40)
Insert IC Size
to
Insert IC Size
to
Cutting Edge Length
to
Cutting Edge Length
to
Chip Breaker CBMD
  • HP (40)
Cutting Tool Material
  • H W (40)
Tolerance Class
  • P (24)
  • G (16)
other
Grade
  • KCU25 (10)
  • KCU40 (10)
  • KC7140 (6)
  • KC7215 (5)
  • KC7815 (5)
  • KCPK10 (4)
Platform
  • Drill Fix (40)
Tool Unit
  • I (40)
  • M (40)
Drilling Condition Material
  • P5 (26)
  • P6 (26)
  • K3 (20)
  • N5 (20)
  • P4 (20)
  • K2 (16)
  • N1 (14)
  • N2 (14)
  • N3 (14)
  • M3 (12)
  • N4 (12)
  • N6 (10)
  • N7 (10)
  • P1 (10)
  • P2 (10)
  • P3 (10)
  • S1 (10)
  • S2 (10)
  • S3 (10)
  • S4 (10)
  • P0 (2)
Cutting Condition Material
  • P5 (26)
  • P6 (26)
  • K3 (20)
  • N5 (20)
  • P4 (20)
  • K2 (16)
  • N1 (14)
  • N2 (14)
  • N3 (14)
  • M3 (12)
  • N4 (12)
  • N6 (10)
  • N7 (10)
  • P1 (10)
  • P2 (10)
  • P3 (10)
  • S1 (10)
  • S2 (10)
  • S3 (10)
  • S4 (10)
  • P0 (2)
Insert Hand
  • N (23)
  • R (11)
No filters matching ""

Grades

  • KC7140

    Composition: PVD TiCN/TiN coated medium-grain carbide with high toughness.

    Application: Best suited for machining of steel and stainless steel. This exceptionally tough grade is perfectly suited for metastable machining conditions offering excellent tool life.

    P
    S
    K
    M
    N
  • KC7215

    • TiAlN-PVD-coated universal fine-grain grade.
    • Highest level of wear resistance resulting in higher cutting speeds.
    • More wear resistant than TiN-PVD grades.
    • Particularly suitable for alloyed steel and cast iron.

    P
    K
  • KC7815

    Multi-Layered MT-CVD TiCN-Al203 coating
    Designed for indexable drilling of alloyed steels and some cast irons
    Superior performance when drilling ferrous steels at elevated speeds
    Expect 100% improvement in tool life versus competitive grades
    Use KC7815 in outboard pockets, KC7140 in inboard pockets for optimum performance with DRILL-FIX bodies
    Geometry: GD with honed negative land provides added strength

    P
    K
  • KCPK10

    Composition: Advanced TiCN-Al2O3-CVD coating combined with a cobalt-enriched carbide substrate, this grade offers a balanced combination of deformation resistance and edge toughness.
    Application: KCPK10 offers outstanding abrasion and crater wear resistance for high-speed machining of steels and cast irons. Use for very high cutting speeds with low to medium feed rates.

    P
    S
    K
    M
    N
  • KCU25

    Turning Composition: An advanced PVD grade with hard AlTiN coating and fine-grain unalloyed substrate. The new and improved coating improves edge stability with wide range speed and feed capabilities.

    Turning Application: The KCU25 grade is ideal for general machining of most steels, stainless steels, high-temp alloys, titanium, irons, and non-ferrous materials in a wide range of speeds and feeds with improved edge toughness for interrupted cut and high feed rates.

    Holemaking Composition: Advanced CVD TiCN-Al2O3 coating combined with a tough carbide substrate.

    Holemaking Application: First choice for steel, stainless steel, and cast iron. This grade offers adequate deformation resistance, excellent edge strength, and superior wear resistance over a wide range of machining conditions for high productivity with very good reliability.

    P
    S
    H
    K
    M
    N
  • KCU40

    Composition: Multilayered TiN-TiAlN-PVD coating and a tough substrate, that withstands interruptions and provides high wear resistance for long tool life.
    Application: KCU40 is the first choice for high reliability in most materials. This grade should be used at medium speeds and high feeds due to sharper edges. KCU40 covers steel, stainless steel, cast iron, and high-temperature alloys for high toughness applications under certain conditions.

    P
    S
    H
    K
    M
    N

Warnings • Drill Fix DFR