No Items in Cart
Sign In
Loading Profile
English
COVID-19: How Kennametal is responding
Indexable Inserts
Indexable Inserts
Indexable Inserts
Indexable Inserts

Mill 1-14™

Indexable Inserts

Features and benefits

  • Medium roughing and semi-finishing.

  • Solution for austenitic stainless steel and super alloys.

  • Medium feed rates.

  • PSTS — Precision Pressed and Sintered to Size.

  • Ap1 max = 14mm.

Workpiece Material

P
S
H
K
M
Displaying 1-10 of 23 results
Select Columns
ColumnsX
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [LI] Insert Length [LI] Insert Length [S] Insert Thickness [S] Insert Thickness [W] Insert Width [W] Insert Width [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM] Cutting Edges per Insert
3855211 EDPT140404PDSRGE EP1404SGE KCPK30 17.4300 .6860 4.4480 .1751 8.2000 .3230 2.8000 .1100 0.4000 .0160 0.1370 .0054 2
3954566 EDPT140404PDSRGE EP1404SGE KCPM20 17.430 .6860 4.448 .1751 8.200 .3230 2.800 .1100 0.400 .0160 0.137 .0054 2
3855237 EDPT140408PDSRGE EP1408SGE KC725M 17.4400 .6860 4.4480 .1751 8.1700 .3220 2.3900 .0940 0.7900 .0310 0.1370 .0054 2
3855238 EDPT140408PDSRGE EP1408SGE KCPK30 17.4400 .6860 4.4480 .1751 8.1700 .3220 2.3900 .0940 0.7900 .0310 0.1370 .0054 2
3855240 EDPT140412PDSRGE EP1412SGE KC522M 17.4400 .6870 4.4480 .1751 8.1400 .3200 1.9800 .0780 1.1900 .0470 0.1370 .0054 2
3855241 EDPT140412PDSRGE EP1412SGE KC725M 17.4400 .6870 4.4480 .1751 8.1400 .3200 1.9800 .0780 1.1900 .0470 0.1370 .0054 2
3855176 EDPT140416PDSRGE EP1416SGE KC522M 17.4500 .6870 4.4480 .1751 8.1200 .3200 1.5800 .0620 1.5900 .0620 0.1370 .0054 2
3855179 EDPT140431PDSRGE EP1431SGE KC522M 17.460 .6870 4.448 .1751 8.070 .3180 0.130 .0050 3.100 .1220 0.137 .0054 2
6172195 EDPT140431PDSRGE EP1431SGE KCSM40 17.4600 .6870 4.4480 .1751 8.0700 .3180 0.1300 .0050 3.1000 .1220 0.1370 .0054 2
3855209 EDPT140404PDSRGE EP1404SGE KC522M 17.4300 .6860 4.4480 .1751 8.2000 .3230 2.8000 .1100 0.4000 .0160 0.1370 .0054 2
3855210 EDPT140404PDSRGE EP1404SGE KC725M 17.4300 .6860 4.4480 .1751 8.2000 .3230 2.8000 .1100 0.4000 .0160 0.1370 .0054 2
3855236 EDPT140408PDSRGE EP1408SGE KC522M 17.4400 .6860 4.4480 .1751 8.1700 .3220 2.3900 .0940 0.7900 .0310 0.1370 .0054 2
3954567 EDPT140408PDSRGE EP1408SGE KCPM20 17.4400 .6860 4.4480 .1751 8.1700 .3220 2.3900 .0940 0.7900 .0310 0.1370 .0054 2
5545161 EDPT140408PDSRGE EP1408SGE KCPM40 17.4400 .6860 4.4480 .1751 8.1700 .3220 2.3900 .0940 0.7900 .0310 0.1370 .0054 2
6172192 EDPT140408PDSRGE EP1408SGE KCSM40 17.4400 .6860 4.4480 .1751 8.1700 .3220 2.3900 .0940 0.7900 .0310 0.1370 .0054 2
3855242 EDPT140412PDSRGE EP1412SGE KCPK30 17.4400 .6870 4.4480 .1751 8.1400 .3200 1.9800 .0780 1.1900 .0470 0.1370 .0054 2
6172193 EDPT140412PDSRGE EP1412SGE KCSM40 17.4400 .6870 4.4480 .1751 8.1400 .3200 1.9800 .0780 1.1900 .0470 0.1370 .0054 2
3855177 EDPT140416PDSRGE EP1416SGE KC725M 17.4500 .6870 4.4480 .1751 8.1200 .3200 1.5800 .0620 1.5900 .0620 0.1370 .0054 2
3855178 EDPT140416PDSRGE EP1416SGE KCPK30 17.4500 .6870 4.4480 .1751 8.1200 .3200 1.5800 .0620 1.5900 .0620 0.1370 .0054 2
6172194 EDPT140416PDSRGE EP1416SGE KCSM40 17.4500 .6870 4.4480 .1751 8.1200 .3200 1.5800 .0620 1.5900 .0620 0.1370 .0054 2
3855180 EDPT140431PDSRGE EP1431SGE KC725M 17.4600 .6870 4.4480 .1751 8.0700 .3180 0.1300 .0050 3.1000 .1220 0.1370 .0054 2
3855181 EDPT140431PDSRGE EP1431SGE KCPK30 17.4600 .6870 4.4480 .1751 8.0700 .3180 0.1300 .0050 3.1000 .1220 0.1370 .0054 2
3954568 EDPT140431PDSRGE EP1431SGE KCPM20 17.4600 .6870 4.4480 .1751 8.0700 .3180 0.1300 .0050 3.1000 .1220 0.1370 .0054 2
Select Filters
FiltersX
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (23)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (19)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (19)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (19)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (19)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (19)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (23)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (23)
  • M Stainless Steel (23)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (23)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (23)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (23)
  • K Cast Iron (13)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (13)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (13)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (13)
  • S High-Temp Alloys (20)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (15)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (15)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (15)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (20)
  • H Hardened Materials (8)
    • H1
      Hardened Materials 44-48 HRC
      (8)
Applications
  • ID Thread Turning (23)
Cutting Edges Per Insert
to
Corner configuration
Corner Radius
to
Corner Radius
to
Application
Grade Of Cutting Tool
  • KC522M (5)
  • KC725M (5)
  • KCPK30 (5)
  • KCSM40 (4)
  • KCPM20 (3)
  • KCPM40 (1)
Wiper Insert
  • N (23)
Front-End
Insert Shape
  • X-PARALLELOGRAM 70 (19)
  • E-PARALLELOGRAM 70 (4)
Insert Geometry
Shape
  • X-PARALLELOGRAM 70 (19)
  • E-PARALLELOGRAM 70 (4)
Chip Breaker CBMD
  • GE (23)
Cutting Tool Material
  • H W (23)
Tolerance Class
  • P (23)
other
Grade
  • KC522M (5)
  • KC725M (5)
  • KCPK30 (5)
  • KCSM40 (4)
  • KCPM20 (3)
  • KCPM40 (1)
Platform
  • Mill 1-14 (23)
Tool Unit
  • I (23)
  • M (23)
Insert Hand
  • R (21)
No filters matching ""

Grades

  • KC522M

    AlTiN-PVD-coated carbide grade engineered to provide better performance in general machining of high-temperature alloys and stainless steel. KC522M resists breakage and offers improved wear resistance and increased strength.

    P
    S
    H
    K
    M
  • KC725M

    A high-performance TiAlN-PVD-coated carbide grade for milling steel, stainless steel and ductile cast iron. The good thermal shock resistance of the substrate makes this grade ideal for both wet and dry machining. KC725M is primarily for use in general and heavy machining.

    P
    S
    M
  • KCPK30

    A multilayered TiN-TiCN-Al2O3-CVD-coated carbide grade with advanced Beyond™ post-coat treatment and a very tough substrate. KCPK30 has a wide application area in general and rough milling of steels and cast irons. It performs best dry but can also be used wet.

    P
    S
    K
    M
  • KCPM20

    KCPM20 is a multilayered TiN-MT-TiCN-Al2O3-CVD-coated carbide grade with advanced Beyond™ post-coat treatment. The substrate is a well-balanced combination of wear resistance and toughness. KCPM20 is primarily for light and general machining of steels and stainless steels or roughing of cast irons.

    P
    H
    K
    M
  • KCPM40

    Coated carbide grade with an advanced PVD TiAlN/AlCrN coating. Tough substrate with excellent capability at higher temperatures. KCPM40™ is the first choice for milling steel and stainless steel. Good thermal shock resistance makes this grade ideal for both wet and dry machining. Primarily for use in general and heavy machining.

    P
    S
    M
  • KCSM40

    Coated carbide grade with an advanced PVD TiAlN/TiN coating. Premium substrate with newly developed binder composition. KCSM40  is a high-performance grade for titanium, super alloys, and stainless steel. High thermal shock resistance of the substrate makes this grade ideal for wet machining. First choice for roughing and unsuitable cutting conditions.

    P
    S
    M