Indexable End Mills
Indexable End Mills
Indexable End Mills
Indexable End Mills

Mill 1-14™ End Mills • Cylindrical Shank • Metric

Indexable End Mills

Features and benefits

  • Aggressive ramping rates.

  • Generates superior surface finish.

  • Mill 90° walls.

  • High RPM capabilities.

Uses and application

  • Face MillingFace Milling
  • Helical MillingHelical Milling
  • Ramping: BlankRamping: Blank
  • Slotting: Square EndSlotting: Square End
  • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
  • PocketingPocketing
  • Shank - Cylindrical  PlainShank - Cylindrical Plain
  • Milling - Through CoolantMilling - Through Coolant

Workpiece Materials

P
M
K
N
S
H
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (2)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (2)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (2)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (2)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (2)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (2)
  • M Stainless Steel (2)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (2)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (2)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (2)
  • K Cast Iron (2)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (2)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (2)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (2)
  • N Non-Ferrous Materials (2)
    • N1
      Wrought Aluminum
      (2)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (2)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (2)
  • S High-Temp Alloys (2)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (2)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (2)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (2)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (2)
  • H Hardened Materials (2)
    • H1
      Hardened Materials 44-48 HRC
      (2)
Select First Choice
  • CN (2)
  • DE (2)
  • IN (1)
Applications
  • Chamfer Milling Chamfer Milling (2)
  • Drilling Drilling (2)
  • Face Milling Face Milling (2)
  • Flat Bottom Drilling Flat Bottom Drilling (2)
  • Pipe Thread Pipe Thread (2)
  • Pocket Pocket (2)
  • Pocket Helical Pocket Helical (2)
  • Pocket Milling Pocket Milling (2)
  • Pocket Plunge Milling Pocket Plunge Milling (2)
  • Profile Milling Profile Milling (2)
  • Ramping Ramping (2)
  • Shoulder Ball Nose Shoulder Ball Nose (2)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (2)
  • Shoulder Milling Shoulder Milling (2)
  • Shoulder Roughing Shoulder Roughing (2)
  • Shoulder Square End Shoulder Square End (2)
  • Slot Ball Nose Slot Ball Nose (2)
  • Slot Milling Slot Milling (2)
  • Slot Side Slot Side (2)
  • Slot Square End Slot Square End (2)
  • Slot T Slot T (2)
  • Thread Milling Thread Milling (2)
  • Threading Threading (2)
Cutting Diameter
  • 20.0 (2)
to
Cutting Diameter
  • 0.7874 (2)
to
Cutting Length
  • 0.5787 (2)
to
Cutting Length
  • 14.7 (2)
to
Reach
  • 39.0 (1)
  • 50.0 (1)
to
Reach
  • 1.5354 (1)
  • 1.969 (1)
to
Tool Cutting Edge Angle
  • 90.0 (2)
to
Cutting Edges Per Insert
  • 2.0 (2)
to
Corner configuration
Corner Radius
  • 0.2 (2)
  • 0.4 (2)
  • 0.79 (2)
  • 0.794 (2)
  • 0.8 (2)
  • 1.19 (2)
  • 1.2 (2)
  • 1.59 (2)
  • 1.6 (2)
  • 2.0 (2)
  • 2.38 (2)
  • 3.1 (2)
  • 4.0 (2)
to
Corner Radius
  • 0.008 (2)
  • 0.0156 (2)
  • 0.016 (2)
  • 0.031 (2)
  • 0.0312 (2)
  • 0.0313 (2)
  • 0.0469 (2)
  • 0.047 (2)
  • 0.062 (2)
  • 0.0625 (2)
  • 0.0783 (2)
  • 0.094 (2)
  • 0.122 (2)
  • 0.157 (2)
to
Application
Grade Of Cutting Tool
  • KC410M (2)
  • KC422M (2)
  • KC520M (2)
  • KC522M (2)
  • KC725M (2)
  • KCK15 (2)
  • KCPK30 (2)
  • KCPM20 (2)
  • KCPM40 (2)
  • KCSM30 (2)
  • KCSM40 (2)
Maximum Ramp Angle
  • 16.6 (2)
to
Front-End
Insert Shape
  • E-PARALLELOGRAM 70 (2)
  • X-PARALLELOGRAM 70 (2)
Back-End
Back-End Diameter
  • 0.7874 (2)
to
Back-End Diameter
to
other
Platform
  • Mill 1-14 (2)
Tool Unit
  • M (2)
Over All Length [L]
  • 90.0 (1)
  • 170.0 (1)
to
Over All Length [L]
  • 3.5433 (1)
  • 6.693 (1)
to
Head Length [L2]
  • 39.0 (1)
  • 50.0 (1)
to
Head Length [L2]
  • 1.5354 (1)
  • 1.969 (1)
to
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
  • Indexable Milling
Displaying 1- 2 of 2 results
Select Columns
Select Filters
Metric
Inch
Show
    • Applied Filters:
    • Clear all filters
  • X Back-End Diameter = 20.0
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Weight Kilograms Max RPM
2968363 20A02R050A20SED14-170 M1D020ME1402C020L050-170   20.0000 .7874 20.0 .7874 170.0000 6.693 50.0000 1.969 14.7000 .5787 2 16.600 0.34 47500
    3345674 20A02R039A20SED14 M1D020ME1402C020L039   20.0000 .7874 20.0 .7874 90.0000 3.543 39.0000 1.535 14.7000 .5787 2 16.600 0.17 47500
      List price:
      Discount: %
      Your price::
      Replacement This item is not available
      Replacement Product This item may be available through a distributor
      Qty
      If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
      You are about to create a duplicate . Do you want to proceed?
      You are about to delete Do you want to proceed?
      What would you like to rename your to?
      Please enter a valid name
      Please enter a name for the duplicate
      Please enter a valid name
      You are about to add to your My Solutions page. Do you want to proceed?
      Please enter a valid name
      Send a copy of

      Please enter a valid Email
      Please enter a valid name

      We have found the following CAD Drawings

      Select the files you are looking for and download them all at once

      You should be logged to see your dashboard information
      The product/s () you were trying to add to the cart is/are not available, please contact customer service.
      item(s) successfully added to the cart
      View Cart