Indexable End Mills
Indexable End Mills
Indexable End Mills
Indexable End Mills

Mill 1-14™ End Mills • Weldon Shank • Inch

Indexable End Mills

Features and benefits

  • Mill 0° walls.

  • Aggressive ramping angles.

  • Generates superior surface finish.

  • High RPM capabilities.

Uses and application

  • Face MillingFace Milling
  • Helical MillingHelical Milling
  • Ramping: BlankRamping: Blank
  • Slotting: Square EndSlotting: Square End
  • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
  • PocketingPocketing
  • Shank - Cylindrical  Weldon 2 FlatShank - Cylindrical Weldon 2 Flat
  • Milling - Through CoolantMilling - Through Coolant

Workpiece Materials

P
M
K
N
S
H
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (7)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (7)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (7)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (7)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (7)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (7)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (7)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (7)
  • M Stainless Steel (7)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (7)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (7)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (7)
  • K Cast Iron (7)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (7)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (7)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (7)
  • N Non-Ferrous Materials (7)
    • N1
      Wrought Aluminum
      (7)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (7)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (7)
  • S High-Temp Alloys (7)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (7)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (7)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (7)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (7)
  • H Hardened Materials (7)
    • H1
      Hardened Materials 44-48 HRC
      (7)
Select First Choice
  • US (5)
Applications
  • Chamfer Milling Chamfer Milling (7)
  • Drilling Drilling (7)
  • Face Milling Face Milling (7)
  • Flat Bottom Drilling Flat Bottom Drilling (7)
  • Pipe Thread Pipe Thread (7)
  • Pocket Pocket (7)
  • Pocket Helical Pocket Helical (7)
  • Pocket Milling Pocket Milling (7)
  • Pocket Plunge Milling Pocket Plunge Milling (7)
  • Profile Milling Profile Milling (7)
  • Ramping Ramping (7)
  • Shoulder Ball Nose Shoulder Ball Nose (7)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (7)
  • Shoulder Milling Shoulder Milling (7)
  • Shoulder Roughing Shoulder Roughing (7)
  • Shoulder Square End Shoulder Square End (7)
  • Slot Ball Nose Slot Ball Nose (7)
  • Slot Milling Slot Milling (7)
  • Slot Side Slot Side (7)
  • Slot Square End Slot Square End (7)
  • Slot T Slot T (7)
  • Thread Milling Thread Milling (7)
  • Threading Threading (7)
Cutting Diameter
  • 15.875 (1)
  • 19.05 (1)
  • 22.225 (1)
  • 24.64 (1)
  • 25.4 (2)
  • 31.75 (1)
to
Cutting Diameter
  • 0.625 (1)
  • 0.75 (1)
  • 0.875 (1)
  • 0.97 (1)
  • 1.0 (2)
  • 1.25 (1)
to
Cutting Length
  • 0.57 (1)
  • 0.58 (6)
to
Cutting Length
  • 14.478 (1)
  • 14.6 (1)
  • 14.732 (5)
to
Reach
  • 38.11 (1)
  • 44.45 (5)
  • 57.15 (1)
to
Reach
  • 1.5 (1)
  • 1.75 (5)
  • 2.25 (1)
to
Tool Cutting Edge Angle
  • 90.0 (7)
to
Cutting Edges Per Insert
  • 2.0 (7)
to
Corner configuration
Corner Radius
  • 0.2 (7)
  • 0.4 (7)
  • 0.79 (7)
  • 0.794 (7)
  • 0.8 (7)
  • 1.19 (7)
  • 1.2 (7)
  • 1.59 (7)
  • 1.6 (7)
  • 2.0 (7)
  • 2.38 (7)
  • 3.1 (7)
  • 4.0 (7)
to
Corner Radius
  • 0.008 (7)
  • 0.0156 (7)
  • 0.016 (7)
  • 0.031 (7)
  • 0.0312 (7)
  • 0.0313 (7)
  • 0.0469 (7)
  • 0.047 (7)
  • 0.062 (7)
  • 0.0625 (7)
  • 0.0783 (7)
  • 0.094 (7)
  • 0.122 (7)
  • 0.157 (7)
to
Application
Grade Of Cutting Tool
  • KC410M (7)
  • KC422M (7)
  • KC520M (7)
  • KC522M (7)
  • KC725M (7)
  • KCK15 (7)
  • KCPK30 (7)
  • KCPM20 (7)
  • KCPM40 (7)
  • KCSM30 (7)
  • KCSM40 (7)
Maximum Ramp Angle
  • 7.2 (1)
  • 10.2 (1)
  • 10.4 (1)
  • 10.9 (1)
  • 13.2 (1)
  • 18.0 (1)
  • 25.0 (1)
to
Front-End
Insert Shape
  • E-PARALLELOGRAM 70 (7)
  • X-PARALLELOGRAM 70 (7)
Back-End
Back-End Diameter
  • 0.75 (2)
  • 1.0 (4)
  • 1.25 (1)
to
Back-End Diameter
  • 19.05 (2)
  • 25.4 (4)
  • 31.75 (1)
to
other
Platform
  • Mill 1-14 (7)
Tool Unit
  • I (7)
Over All Length [L]
  • 89.67 (1)
  • 96.012 (1)
  • 102.36 (3)
  • 102.362 (1)
  • 115.062 (1)
to
Over All Length [L]
  • 3.53 (1)
  • 3.78 (1)
  • 4.03 (4)
  • 4.53 (1)
to
Head Length [L2]
  • 38.11 (1)
  • 44.45 (5)
  • 57.15 (1)
to
Head Length [L2]
  • 1.5 (1)
  • 1.75 (5)
  • 2.25 (1)
to
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 7 of 7 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Weight Pounds Max RPM
2624243 M1D062E1401W075L150 M1D062E1401W075L150   15.8750 .6250 19.05 .75 89.6700 3.530 38.1100 1.500 14.7320 .5800 1 25.000 0.31 8000
    2623856 M1D075E1402W075L175 M1D075E1402W075L175   19.0500 .7500 19.05 .75 96.0120 3.780 44.4500 1.750 14.7320 .5800 2 18.000 0.35 49600
      2623857 M1D100E1402W100L175 M1D100E1402W100L175   25.4000 1.000 25.4 1.0 102.3620 4.030 44.4500 1.750 14.7320 .5800 2 10.400 0.71 39200
        2479508 M1D100E1403W100L175 M1D100E1403W100L175   25.4000 1.000 25.4 1.0 102.3600 4.030 44.4500 1.750 14.6000 .5800 3 10.200 0.71 39200
          2479506 M1D125E1404W125L225 M1D125E1404W125L225   31.7500 1.250 31.75 1.25 115.0620 4.530 57.1500 2.250 14.4780 .5700 4 7.200 1.25 33400
            2624245 M1D088E1402W100L175 M1D088E1402W100L175   22.2250 .8750 25.4 1.0 102.3600 4.030 44.4500 1.750 14.7320 .5800 2 13.200 0.66 43500
              2624189 M1D097E1403W100L175 M1D097E1403W100L175   24.6400 .9700 25.4 1.0 102.3600 4.030 44.4500 1.750 14.7320 .5800 3 10.900 0.69 40100
                List price:
                Discount: %
                Your price::
                Replacement This item is not available
                Replacement Product This item may be available through a distributor
                Qty
                If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                You are about to create a duplicate . Do you want to proceed?
                You are about to delete Do you want to proceed?
                What would you like to rename your to?
                Please enter a valid name
                Please enter a name for the duplicate
                Please enter a valid name
                You are about to add to your My Solutions page. Do you want to proceed?
                Please enter a valid name
                Send a copy of

                Please enter a valid Email
                Please enter a valid name

                We have found the following CAD Drawings

                Select the files you are looking for and download them all at once

                You should be logged to see your dashboard information
                The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                item(s) successfully added to the cart
                View Cart