Indexable Shell Mills
Indexable Shell Mills
Indexable Shell Mills
Indexable Shell Mills

Mill 1-14™ Shell Mills • Metric

Indexable Shell Mills

Features and benefits

  • Aggressive ramping rates.

  • Generates superior surface finish.

  • Mill 90° walls.

  • High RPM capabilities.

Uses and application

  • Face MillingFace Milling
  • Helical MillingHelical Milling
  • Ramping: BlankRamping: Blank
  • Slotting: Square EndSlotting: Square End
  • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
  • PocketingPocketing
  • Milling - Side and FaceMilling - Side and Face
  • Milling - Through CoolantMilling - Through Coolant

Workpiece Materials

P
M
K
N
S
H
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (13)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (13)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (13)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (13)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (13)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (13)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (13)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (13)
  • M Stainless Steel (13)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (13)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (13)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (13)
  • K Cast Iron (13)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (13)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (13)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (13)
  • N Non-Ferrous Materials (13)
    • N1
      Wrought Aluminum
      (13)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (13)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (13)
  • S High-Temp Alloys (13)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (13)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (13)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (13)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (13)
  • H Hardened Materials (13)
    • H1
      Hardened Materials 44-48 HRC
      (13)
Select First Choice
  • CN (13)
  • DE (13)
  • GB (2)
  • IN (1)
  • US (4)
Applications
  • Chamfer Milling Chamfer Milling (13)
  • Drilling Drilling (13)
  • Face Milling Face Milling (13)
  • Flat Bottom Drilling Flat Bottom Drilling (13)
  • Pipe Thread Pipe Thread (13)
  • Pocket Pocket (13)
  • Pocket Helical Pocket Helical (13)
  • Pocket Milling Pocket Milling (13)
  • Pocket Plunge Milling Pocket Plunge Milling (13)
  • Profile Milling Profile Milling (13)
  • Ramping Ramping (13)
  • Shoulder Ball Nose Shoulder Ball Nose (13)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (13)
  • Shoulder Milling Shoulder Milling (13)
  • Shoulder Roughing Shoulder Roughing (13)
  • Shoulder Square End Shoulder Square End (13)
  • Slot Ball Nose Slot Ball Nose (13)
  • Slot Milling Slot Milling (13)
  • Slot Side Slot Side (13)
  • Slot Square End Slot Square End (13)
  • Slot T Slot T (13)
  • Thread Milling Thread Milling (13)
  • Threading Threading (13)
Cutting Diameter
  • 40.0 (2)
  • 50.0 (2)
  • 63.0 (2)
  • 80.0 (2)
  • 100.0 (2)
  • 125.0 (2)
  • 160.0 (1)
to
Cutting Diameter
  • 1.575 (2)
  • 1.969 (2)
  • 2.48 (2)
  • 3.15 (2)
  • 3.937 (2)
  • 4.921 (2)
  • 6.299 (1)
to
Cutting Length
  • 0.55 (2)
  • 0.56 (11)
to
Cutting Length
  • 14.0 (6)
  • 14.1 (3)
  • 14.2 (2)
  • 14.3 (2)
to
Tool Cutting Edge Angle
  • 90.0 (13)
to
Cutting Edges Per Insert
  • 2.0 (13)
to
Corner configuration
Corner Radius
  • 0.2 (13)
  • 0.4 (13)
  • 0.79 (13)
  • 0.794 (13)
  • 0.8 (13)
  • 1.19 (13)
  • 1.2 (13)
  • 1.59 (13)
  • 1.6 (13)
  • 2.0 (13)
  • 2.38 (13)
  • 3.1 (13)
  • 4.0 (13)
to
Corner Radius
  • 0.008 (13)
  • 0.0156 (13)
  • 0.016 (13)
  • 0.031 (13)
  • 0.0312 (13)
  • 0.0313 (13)
  • 0.0469 (13)
  • 0.047 (13)
  • 0.062 (13)
  • 0.0625 (13)
  • 0.0783 (13)
  • 0.094 (13)
  • 0.122 (13)
  • 0.157 (13)
to
Application
Grade Of Cutting Tool
  • KC410M (13)
  • KC422M (13)
  • KC520M (13)
  • KC522M (13)
  • KC725M (13)
  • KCK15 (13)
  • KCPK30 (13)
  • KCPM20 (13)
  • KCPM40 (13)
  • KCSM30 (13)
  • KCSM40 (13)
Maximum Ramp Angle
  • 0.9 (1)
  • 1.2 (2)
  • 1.5 (2)
  • 1.9 (2)
  • 2.5 (2)
  • 3.5 (2)
  • 4.8 (2)
to
Front-End
Insert Shape
  • E-PARALLELOGRAM 70 (13)
  • X-PARALLELOGRAM 70 (13)
Back-End
Back-End Diameter
  • 0.63 (2)
  • 0.87 (4)
  • 1.06 (2)
  • 1.26 (2)
  • 1.58 (3)
to
Back-End Diameter
  • 16.0 (2)
  • 22.0 (4)
  • 27.0 (2)
  • 32.0 (2)
  • 40.0 (3)
to
other
Platform
  • Mill 1-14 (13)
Tool Unit
  • M (13)
Over All Length [L]
  • 40.0 (6)
  • 50.0 (4)
  • 63.0 (3)
to
Over All Length [L]
  • 1.575 (6)
  • 1.969 (4)
  • 2.48 (3)
to
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 10 of 13 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D4] Bolt Circle 4 [D4] Bolt Circle 3 [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Weight Kilograms Max RPM
2623940 40A04RS90ED14D M1D040ME1404S016L040   40.0000 1.575 16.0 .63     37.0000 1.457 40.0000 1.575 14.3000 .5600 4 4.800 0.21 28700
    2623934 40A05RS90ED14D M1D040ME1405S016L040   40.0000 1.575 16.0 .63     37.0000 1.457 40.0000 1.575 14.3000 .5600 5 4.800 0.21 28700
      2623941 50A05RS90ED14D M1D050ME1405S022L040   50.0000 1.969 22.0 .87     45.0000 1.772 40.0000 1.575 14.0000 .5600 5 3.500 0.30 25000
        2478686 50A06RS90ED14D M1D050ME1406S022L040   50.0000 1.969 22.0 .87     45.0000 1.772 40.0000 1.575 14.0000 .5600 6 3.500 0.29 25000
          2623942 63A06RS90ED14D M1D063ME1406S022L040   63.0000 2.480 22.0 .87     50.0000 1.969 40.0000 1.575 14.0000 .5500 6 2.500 0.49 21800
            2478689 63A07RS90ED14D M1D063ME1407S022L040   63.0000 2.480 22.0 .87     50.0000 1.969 40.0000 1.575 14.0000 .5500 7 2.500 0.48 21800
              2623963 80A07RS90ED14D M1D080ME1407S027L050   80.0000 3.150 27.0 1.06     60.0000 2.362 50.0000 1.969 14.0000 .5600 7 1.900 1.00 19000
                2478690 80A09RS90ED14D M1D080ME1409S027L050   80.0000 3.150 27.0 1.06     60.0000 2.362 50.0000 1.969 14.0000 .5600 9 1.900 1.00 19000
                  2623964 100A08RS90ED14D M1D100ME1408S032L050   100.0000 3.937 32.0 1.26     80.0000 3.150 50.0000 1.969 14.2000 .5600 8 1.500 1.80 16800
                    2623935 100A10RS90ED14D M1D100ME1410S032L050   100.0000 3.937 32.0 1.26     80.0000 3.150 50.0000 1.969 14.2000 .5600 10 1.500 1.81 16800
                      2510390 125B09RS90ED14D M1D125ME1409S040L063   125.0000 4.921 40.0 1.58     90.0000 3.543 63.0000 2.480 14.1000 .5600 9 1.200 2.64 14900
                        2623936 125B12RS90ED14D M1D125ME1412S040L063   125.0000 4.921 40.0 1.58     90.0000 3.543 63.0000 2.480 14.1000 .5600 12 1.200 2.66 14900
                          2623965 160C11RS90ED14D M1D160ME1411S040L063   160.0000 6.299 40.0 1.58 66.7000 2.626 100.0000 3.937 63.0000 2.480 14.1000 .5600 11 0.900 3.64 13100
                            List price:
                            Discount: %
                            Your price::
                            Replacement This item is not available
                            Replacement Product This item may be available through a distributor
                            Qty
                            If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                            You are about to create a duplicate . Do you want to proceed?
                            You are about to delete Do you want to proceed?
                            What would you like to rename your to?
                            Please enter a valid name
                            Please enter a name for the duplicate
                            Please enter a valid name
                            You are about to add to your My Solutions page. Do you want to proceed?
                            Please enter a valid name
                            Send a copy of

                            Please enter a valid Email
                            Please enter a valid name

                            We have found the following CAD Drawings

                            Select the files you are looking for and download them all at once

                            You should be logged to see your dashboard information
                            The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                            item(s) successfully added to the cart
                            View Cart