Suggestions

Product Suggestions

Product Categories

Resources

Order Products Online
successfully added to cart
View Cart

Counterboring Tools

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (66)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (66)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (66)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (66)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (66)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (66)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (66)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (66)
  • M Stainless Steel (62)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (62)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (62)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (62)
  • K Cast Iron (92)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (92)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (92)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (92)
  • N Non-Ferrous Materials (29)
    • N1
      Wrought Aluminum
      (29)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (29)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (29)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (29)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (29)
    • N6
      Carbon, Graphite Composites, CFRP
      (29)
    • N7
      MMC's
      (24)
  • S High-Temp Alloys (61)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (61)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (61)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (61)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (61)
  • H Hardened Materials (16)
    • H1
      Hardened Materials 44-48 HRC
      (16)
    • H2
      Hardened Materials 48-55 HRC
      (16)
    • H3
      Hardened Materials 56-60 HRC
      (16)
    • H4
      Hardened Materials >60 HRC
      (16)
Applications
  • Counterboring Counterboring (35)
  • Drilling Drilling (35)
  • Flat Bottom Drilling Flat Bottom Drilling (35)
  • ID Thread Turning ID Thread Turning (101)
  • Pre-Condition Pre-Condition (35)
Cutting Diameter
  • 15.135 (1)
  • 16.135 (1)
  • 17.135 (1)
  • 18.135 (2)
  • 20.165 (2)
  • 20.637 (1)
  • 21.165 (2)
  • 22.165 (2)
  • 23.165 (2)
  • 24.165 (2)
  • 25.165 (2)
  • 25.4 (1)
  • 26.165 (1)
  • 27.165 (1)
  • 28.165 (1)
  • 30.162 (1)
  • 30.165 (1)
  • 32.195 (1)
  • 33.195 (1)
  • 34.195 (1)
  • 34.925 (1)
  • 35.195 (1)
  • 36.195 (1)
  • 38.195 (1)
  • 40.195 (1)
  • 41.275 (1)
  • 42.195 (1)
  • 46.195 (1)
  • 50.8 (1)
  • 60.325 (1)
  • 69.85 (1)
  • 79.375 (1)
to
Cutting Diameter
  • 0.5959 (1)
  • 0.6352 (1)
  • 0.6746 (1)
  • 0.714 (2)
  • 0.7939 (1)
  • 0.794 (1)
  • 0.8125 (1)
  • 0.8333 (2)
  • 0.8726 (1)
  • 0.873 (1)
  • 0.912 (2)
  • 0.951 (1)
  • 0.9514 (1)
  • 0.9907 (2)
  • 1.0 (1)
  • 1.03 (1)
  • 1.0695 (1)
  • 1.109 (1)
  • 1.1875 (1)
  • 1.188 (1)
  • 1.268 (1)
  • 1.307 (1)
  • 1.3463 (1)
  • 1.375 (1)
  • 1.3856 (1)
  • 1.425 (1)
  • 1.5037 (1)
  • 1.582 (1)
  • 1.625 (1)
  • 1.661 (1)
  • 1.819 (1)
  • 2.0 (1)
  • 2.375 (1)
  • 2.75 (1)
  • 3.125 (1)
to
Cutting Condition
  • Stable (46)
  • Unstable (28)
Reach
  • 38.21 (1)
  • 53.39 (1)
  • 64.39 (1)
  • 77.09 (1)
to
Reach
  • 1.5043 (1)
  • 2.102 (1)
  • 2.535 (1)
  • 3.035 (1)
to
Cutting Edges Per Insert
  • 2.0 (101)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 0.2 (3)
  • 0.4 (54)
  • 0.6 (4)
  • 0.8 (20)
  • 1.0 (6)
  • 1.2 (6)
  • 1.6 (5)
  • 2.0 (3)
to
Corner Radius
  • 0.008 (3)
  • 0.0156 (41)
  • 0.016 (13)
  • 0.0236 (4)
  • 0.0313 (16)
  • 0.0315 (4)
  • 0.0394 (6)
  • 0.0472 (6)
  • 0.0625 (5)
  • 0.0787 (3)
to
Application
Drilling Condition
  • Stable (46)
  • Unstable (28)
Grade Of Cutting Tool
  • CD4 (4)
  • CM4 (3)
  • CS5 (2)
  • KC7140 (4)
  • KC7210 (4)
  • KC7215 (41)
  • KCPK10 (6)
  • KCU25 (13)
  • KCU40 (14)
  • KM1 (10)
Hand Of Tool
  • R (39)
Wiper Insert
  • N (101)
Drill Type
  • 86-04 (39)
Front-End
Insert Shape
  • S-SQUARE 90 (101)
Insert Geometry
Shape
  • S-SQUARE 90 (101)
Insert IC Size
  • 0.25 (18)
  • 0.3125 (23)
  • 0.375 (26)
  • 0.5 (24)
  • 0.625 (10)
to
Insert IC Size
  • 6.35 (18)
  • 7.937 (23)
  • 9.525 (26)
  • 12.7 (24)
  • 15.875 (10)
to
Cutting Edge Length
  • 0.25 (18)
  • 0.3125 (23)
  • 0.375 (26)
  • 0.5 (34)
to
Cutting Edge Length
  • 6.35 (18)
  • 7.937 (23)
  • 9.525 (26)
  • 12.7 (34)
to
Cutting Tool Material
  • H W (101)
Chip Breaker CBMD
  • 20 (43)
  • 21 (44)
  • 22 (4)
Tolerance Class
  • H (15)
Back-End
Connection Type
  • CYLINDRICAL (35)
Back-End Diameter
  • 0.75 (2)
  • 0.7874 (23)
  • 1.0 (3)
  • 1.25 (1)
  • 1.2598 (7)
  • 1.5 (1)
  • 2.0 (2)
to
Back-End Diameter
  • 19.05 (2)
  • 20.0 (23)
  • 25.4 (3)
  • 31.75 (1)
  • 32.0 (7)
  • 38.1 (1)
  • 50.8 (2)
to
other
Grade
  • CD4 (4)
  • CM4 (3)
  • CS5 (2)
  • KC7140 (4)
  • KC7210 (4)
  • KC7215 (41)
  • KCPK10 (6)
  • KCU25 (13)
  • KCU40 (14)
  • KM1 (10)
Platform
  • HTS-C (79)
  • S2S (35)
Tool Unit
  • I (110)
  • M (131)
Solid Indexable Tool
Over All Length [L]
  • 81.0 (2)
  • 86.0 (9)
  • 88.91 (2)
  • 91.0 (4)
  • 96.0 (4)
  • 101.0 (4)
  • 101.61 (2)
  • 111.0 (2)
  • 114.31 (2)
  • 116.0 (1)
  • 121.0 (2)
  • 126.0 (2)
  • 126.99 (1)
  • 152.39 (1)
  • 165.09 (1)
to
Over All Length [L]
  • 3.189 (2)
  • 3.3858 (9)
  • 3.5 (2)
  • 3.5827 (4)
  • 3.7795 (4)
  • 3.9764 (4)
  • 4.0 (2)
  • 4.3701 (2)
  • 4.5 (2)
  • 4.5669 (1)
  • 4.7638 (2)
  • 4.9606 (2)
  • 5.0 (1)
  • 6.0 (1)
  • 6.5 (1)
to
Insert Hand
  • R (101)
Category Path
Drilling Condition Material
  • K1 (19)
  • K2 (19)
  • K3 (19)
  • N1 (5)
  • N2 (5)
  • N3 (5)
  • N4 (5)
  • P1 (26)
  • P2 (26)
  • P3 (26)
  • P4 (26)
  • P5 (26)
  • P6 (26)
Cutting Condition Material
  • K1 (19)
  • K2 (19)
  • K3 (19)
  • N1 (5)
  • N2 (5)
  • N3 (5)
  • N4 (5)
  • P1 (26)
  • P2 (26)
  • P3 (26)
  • P4 (26)
  • P5 (26)
  • P6 (26)
No filters matching ""
View Products in
Metric
Inch
Counterboring Tools

CTR • Counterbore
(9 Products)
  • Counter BoringCounter Boring
  • Shank - Cylindrical WeldonShank - Cylindrical Weldon
  • Flood Coolant: DrillingFlood Coolant: Drilling
  • Flute Configuration: 2Flute Configuration: 2
  • Flute Configuration: 3Flute Configuration: 3
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Drill Diameter M [D1] Drill Diameter M Drill Diameter Tol. Min Drill Diameter Tol. Min Drill Diameter Tol. Max Drill Diameter Tol. Max [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter Pre Machined Hole Diameter [D6] Pre Machined Hole Diameter [D6] [L] Overall Length [L] Overall Length [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth [LS] Shank Length [LS] Shank Length Gage Insert Number of Insert Cutting Diameter 1
1992509 CBT0813RW075N3 CBT0813RW075N3 20.6370 .8125 -0.150000 -0.006 0.150000 .0060 19.05 .75 13.4870 .5312 88.9100 3.500 12.7000 .5000 52.0 2.047 SPHX060204R.. 3
    1992511 CBT1000RW075N2 CBT1000RW075N2 25.4000 1.000 -0.150000 -0.006 0.150000 .0060 19.05 .75 16.6620 .6562 88.9100 3.500 15.8750 .6250 52.0 2.047 SPHX090304R.. 2
      1992583 CBT1188RW100N3 CBT1188RW100N3 30.1620 1.187 -0.150000 -0.006 0.150000 .0060 25.4 1.0 19.8370 .7812 101.6100 4.000 19.0500 .7500 58.4 2.299 SPHX090304R.. 3
        1992584 CBT1375RW100N3 CBT1375RW100N3 34.9250 1.375 -0.196000 -0.007 0.196000 .0077 25.4 1.0 23.0120 .9062 101.6100 4.000 22.2250 .8750 58.4 2.299 SPHX090304R.. 3
          1992698 CBT1625RW100N3 CBT1625RW100N3 41.2750 1.625 -0.150000 -0.006 0.150000 .0060 25.4 1.0 26.1870 1.061 114.3100 4.500 25.4000 1.000 58.4 2.299 SPHX120404R.. 3
            1992702 CBT2000RW125N3 CBT2000RW125N3 50.8000 2.000 -0.150000 -0.006 0.150000 .0060 31.75 1.25 33.3500 1.312 114.3100 4.500 31.7500 1.250 58.4 2.299 SPHX120404R.. 3
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Counterboring Tools

              CTR™ • Counterbore
              (30 Products)
              • Counter BoringCounter Boring
              • Shank - Cylindrical Whistle Notch™Shank - Cylindrical Whistle Notch™
              • Coolant - Through CoolantCoolant - Through Coolant
              • Flute Configuration: 2Flute Configuration: 2
              • Flute Configuration: 3Flute Configuration: 3
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Drill Diameter M [D1] Drill Diameter M Drill Diameter Tol. Min Drill Diameter Tol. Min Drill Diameter Tol. Max Drill Diameter Tol. Max [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter Pre Machined Hole Diameter [D6] Pre Machined Hole Diameter [D6] [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth Gage Insert Number of Insert Cutting Diameter 1
              2204393 CBTF150R2WD20N2M CBTF150R2WD20N2M 15.1350 .5959 -0.120000 -0.004 0.120000 .0047 20.0 .7874 6.0000 .2362 81.0000 3.189 31.0000 1.220 8.5000 .3346 SPHX060204R.. 2
                2204394 CBTF160R2WD20N2M CBTF160R2WD20N2M 16.1350 .6352 -0.120000 -0.004 0.120000 .0047 20.0 .7874 7.0000 .2756 81.0000 3.189 31.0000 1.220 8.5000 .3346 SPHX060204R.. 2
                  2204395 CBTF170R2WD20N2M CBTF170R2WD20N2M 17.1350 .6746 -0.120000 -0.004 0.120000 .0047 20.0 .7874 8.0000 .3150 86.0000 3.385 36.0000 1.417 13.5000 .5315 SPHX060204R.. 2
                    2204405 CBTF180R2WD20N2M CBTF180R2WD20N2M 18.1350 .7140 -0.120000 -0.004 0.120000 .0047 20.0 .7874 8.4000 .3307 86.0000 3.385 36.0000 1.417 13.5000 .5315 SPHX070304R.. 2
                      1246170 CBTF180R2WD20N3M CBTF180R2WD20N3M 18.1350 .7140 -0.120000 -0.004 0.120000 .0047 20.0 .7874 8.4000 .3307 86.0000 3.385 36.0000 1.417 13.5000 .5315 SPHX060204R.. 3
                        2204396 CBTF200R2WD20N2M CBTF200R2WD20N2M 20.1650 .7939 -0.120000 -0.004 0.120000 .0047 20.0 .7874 8.5000 .3346 86.0000 3.385 36.0000 1.417 16.0000 .6299 SPHX070304R.. 2
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Indexable Drills

                          HTS-C Drilling Inserts
                          (51 Products)
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [D1] Insert Hole Size [D1] Insert Hole Size [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [GAA] Insert Rake Angle [Clearance Angle Major Clearning Angle Minor
                          2245738 SPHX060202R20 SPHX060202R20 KC7215 6.3500 .2500 2.8500 .1122 2.3800 .0937 0.2000 .0080 12.000 7.000 7.000
                            1192529 SPHX060204R-20 SPHX060204R20 CM4 6.3500 .2500 2.8500 .1122 2.3800 .0937 0.4000 .0156 12.000 7.000 7.000
                              1208872 SPHX060204R-20 SPHX060204R20 CD4 6.3500 .2500 2.8500 .1122 2.3800 .0937 0.4000 .0156 12.000 7.000 7.000
                                1928669 SPHX060204R20 SPHX060204R20 KC7140 6.3500 .2500 2.8500 .1122 2.3800 .0937 0.4000 .0156 12.000 7.000 7.000
                                  5533640 SPHX060204R20 SPHX060204R20 KCU25 6.3500 .2500 2.8500 .1122 2.3800 .0937 0.4000 .0156 12.000 7.000 7.000
                                    5533648 SPHX060204R20 SPHX060204R20 KCU40 6.3500 .2500 2.8500 .1122 2.3800 .0937 0.4000 .0156 12.000 7.000 7.000
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor
                                      Indexable Drills

                                      HTS-C Drilling Inserts
                                      (45 Products)
                                      View Products
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [D1] Insert Hole Size [D1] Insert Hole Size [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [GAA] Insert Rake Angle [Clearance Angle Major Clearning Angle Minor
                                      2245846 SPHX060202R21 SPHX060202R21 KC7215 6.3500 .2500 2.8500 .1122 2.3800 .0937 0.2000 .0080 4.000 7.000 7.000
                                        1192530 SPHX060204R-21 SPHX060204R21 KM1 6.3500 .2500 2.8500 .1122 2.3800 .0937 0.4000 .0156 4.000 7.000 7.000
                                          5533649 SPHX060204R21 SPHX060204R21 KCU40 6.3500 .2500 2.8500 .1122 2.3800 .0937 0.4000 .0156 4.000 7.000 7.000
                                            5533634 SPHX060204R21 SPHX060204R21 KCPK10 6.3500 .2500 2.8500 .1122 2.3800 .0937 0.4000 .0156 4.000 7.000 7.000
                                              5692809 SPHX060204R21 SPHX060204R21 KCU25 6.3500 .2500 2.8500 .1122 2.3800 .0937 0.4000 .0156 4.000 7.000 7.000
                                                1928673 SPHX060204R21 SPHX060204R21 KC7215 6.3500 .2500 2.8500 .1122 2.3800 .0937 0.4000 .0156 4.000 7.000 7.000
                                                  List price:
                                                  Discount: %
                                                  Your price::
                                                  Replacement This item is not available
                                                  Replacement Product This item may be available through a distributor
                                                  Indexable Drills

                                                  HTS-C Drilling Inserts
                                                  (5 Products)
                                                  View Products
                                                  SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [D1] Insert Hole Size [D1] Insert Hole Size [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [GAA] Insert Rake Angle [Clearance Angle Major
                                                  1208764 SPHX060204R-22 SPHX060204R22 KM1 6.3500 .2500 2.8500 .1122 2.3800 .0937 0.4000 .0156 25.000 7.000
                                                    1192535 SPHX070304R-22 SPHX070304R22 KM1 7.9370 .3125 2.8500 .1122 3.1800 .1252 0.4000 .0156 25.000 7.000
                                                      1192539 SPHX090304R-22 SPHX090304R22 KM1 9.5250 .3750 3.5000 .1378 3.1800 .1252 0.4000 .0160 25.000 7.000
                                                        1208789 SPHX120404R-22 SPHX120404R22 KM1 12.7000 .5000 4.5000 .1772 4.7600 .1874 0.4000 .0156 25.000 7.000
                                                          1208833 SPHX150504R-22 SPHX150504R22 KM1 15.8750 .6250 5.5000 .2165 5.9500 .2343 0.4000 .0156 25.000 7.000
                                                            List price:
                                                            Discount: %
                                                            Your price::
                                                            Replacement This item is not available
                                                            Replacement Product This item may be available through a distributor

                                                            Support

                                                            Chat With an Expert 
                                                            Available Now
                                                            Mon-Fri 8am - 6pm ET

                                                            Global Support

                                                            Shop

                                                            Shop Kennametal Merchandise

                                                            Find Us on Ariba

                                                            Careers

                                                            Work for Kennametal

                                                            ✉ Stay In Touch

                                                            Join our Mailing List

                                                            ⤓ NOVO App

                                                            Find Replacements for Obsolete Tools

                                                            Download Now

                                                            © 2021 Terms & Conditions of Use | Terms & Conditions of Sale | Data Privacy Policy

                                                            Kennametal Inc. 525 William Penn Place Suite 330, Pittsburgh, PA 15219

                                                            If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                                            You are about to create a duplicate . Do you want to proceed?
                                                            You are about to delete Do you want to proceed?
                                                            What would you like to rename your to?
                                                            Please enter a valid name
                                                            Please enter a name for the duplicate
                                                            Please enter a valid name
                                                            You are about to add to your My Solutions page. Do you want to proceed?
                                                            Please enter a valid name
                                                            Send a copy of

                                                            Please enter a valid Email
                                                            Please enter a valid name

                                                            We have found the following CAD Drawings

                                                            Select the files you are looking for and download them all at once

                                                            Can’t find the file type you’re looking for?
                                                            Request Drawings »

                                                            You should be logged to see your dashboard information
                                                            The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                                            item(s) successfully added to the cart
                                                            View Cart